All Products

The Andrew L4A-NMNM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

The Andrew F4A-NMNM-6-P SureFlex cable assembly process uses a 6 foot FSJ4-50B 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N male (silver body, gold pin) connectors installed on each end.The Andrew 6 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

WIRELESS SOLUTIONS 60' TWS-400 Antenna extension cable with RPTNC Female (F center pin) to RPTNC Jack (M center pin). Includes heat shrink. Learn More

RF INDUSTRIES TNC male to N Female Right Angle adapter. Learn More

TWS-400 braided coaxial cable is low loss. This 3/8 inch 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. Generic for LMR-400 Learn More

The Ventev TWS-600 1/2 inch standard braided coax cable with foam dielectric has a UV-resistant polyethylene jacket for outdoor use. This low loss 50 Ohm coax cable is designed with a stranded outer conductor with a copper-clad aluminum center conductor. Maximum frequency capacity is 10.3 GHz. The Ventev 1/2 inch braided coaxial cable is available in bulk and is priced per foot. Learn More

Digital Antenna 489-DB multi-band 800 - 2500 MHz high performance directional antenna can be used for all cellular frequencies. This antenna features a powerful multi-band radiator with 10 dBi gain allowing for focused power to capture more signals. The antenna includes integrated brackets to mount on a pole and has 6 inch of low loss 240 style cable terminated with an N female connector.Designed for easy outside installation on a mast or pole, the 489-DB multi-band directional antenna is ideal for use outside homes, offices and commercial buildings in areas of low cellular signal strength. This yagi antenna offers excellent signal pulling power for fixed installations where previously few solutions existed. Learn More

PCTEL MAXRAD 0-3 GHz 3/4" hole antenna mount. Includes 17' Pro-Flex Plus 195 low loss coaxial cable and SMA male connector (installed). Learn More

HUBER & SUHNER type N female to 7/16 DIN male adapter. Learn More

WIRELESS Solutions 2' TWS-195 Antenna extension cable with RPTNC Jack (F, M) to RPTNC Jack (F, M). Includes heat shrink. Learn More

THOMAS & BETTS Locking heads for Deltec straps. Molded acetal w/ marine grade silicon bronze locking device. 500 pack. Learn More

Wireless Solutions Universal Ground Bar Mounting Hardware kits feature a pair of angle adapters for tower mounting applications and a pair of wall mount brackets. Includes all necessary hardware. Learn More

KLEIN JOURNEYMAN High-Leverage Cable Cutter. Cuts up to 4/0 Alum, 2/0 Soft Cu and 100-pair 24-AWG comm. cable. Red/Black handles. Made in the USA Learn More

The Wireless Solutions LMR240NMNM-6 coaxial cable assembly uses 6 feet of LMR-240 cable. This cable jumper assembly is fitted with N male (54919) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 6 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

TERRAWAVE Solutions 2.4 GHz 13.5dBi 120 Degree Sector Panel Antenna With N-Style Jack. Includes Mounting Hardware. Learn More

KLEIN JOURNEYMAN Non-Insul/Insulated crimping/cutting tool. 10-22 AWG. Tapered Nose, Specially Hardened. Red/ Black handles. Made in the USA. Learn More

The TerraWave directional yagi antenna operates in the 824 - 960 MHz frequency range. The yagi provides a high gain of 13 dBi with a maximum power input of 100 watts. This yagi includes a mast mount and has a 12 inch pigtail with N-style Jack.TerraWave 13 dBi directional yagi antenna is designed for applications in the 900 MHz frequency, including radio frequency identification (RFID) applications, cellular systems, global system for mobile (GSM) communications, code-division multiple access systems (CDMA) applications, multipoint applications and wireless video links. Learn More

WIRELESS SOLUTIONS 20' LMR240 Jumper. Made of LMR240 with N Male (54919) on both ends. Learn More

LARSEN 806-896 MHz NMO unity gain base loaded quarterwave antenna. Order desired NMO 3/4" mount separately. Black. Learn More

COMMSCOPE SureGround for 7/8" Alum or Copper, corrugated or smooth cable w/ 24" #6 copper ground wire lead. Inlcudes factory attached two hole lug. Learn More

The Havis Tilt Swivel Motion Device has a 1.82" overall height. The Motion device enables 180 degree horizontal rotation for laptops and docking stations and a 90 degree vertical tilt for a customized viewing angle. The easy-adjust and quick-release handle locks down the position of the notebook. Learn More

PCTEL BOA4357 is a heavy-duty omnidirectional fiberglass base station antenna with a gain of 7 dBi / 5 dBd. The frequency range is 430 - 470 MHz. This UHF omni antenna has a power input of 250 watts, is DC grounded and terminated with an N female bulkhead connector. The antenna has a removable drain plug to allow for inverting. BWC1005 mounting hardware is included.This UHF antenna has a linear array enclosed in a heavy-duty UV treated light gray fiberglass radome with a thick walled aluminum mounting base to achieve reliable long term use. This durable omni antenna is designed to withstand harsh environments. The BOA omnidirectional base station antenna is ideal for industrial wireless and SCADA applications. Learn More

WIRELESS SOLUTIONS 1" x 10' Schedule 40 PVC conduit. One belled end and one straight end. Learn More

This special trimming tool improves the cable preparation prior to connector attachment. No further tools are required to prepare the cable for the connector attachment. This is due to the unique design of the trimming tool, which combines all necessary functions in one tool. It can be used for all CELLFLEX LCF12-50 foam dielectric cables in combination with the OMNI FIT Premium connector family D01, OMNI FIT Standard family B32 and RAPID FIT families 060/062 + 070/072. The Universal Trimming Tools Series offers the additional advantage to be convertible to different connector families and cable sizes (1/4", 3/8", 1/2" and 7/8") only by changing the insert. Learn More

PCTEL 1575 MHz GPS Reference Timing antenna 3.5 dBic, N Female connector. Integrates a 26 dB low noise amplifier with enhanced filtering. Red Collar Mt & 2' pipe inc Learn More

PCTEL 1575 MHz GPS Reference Timing Antenna. 3.5 dBic, N Female connector. Incorporates a 26 dB low noise amplifier with enhanced filtering. Red Collar Mt incl Learn More

The Havis 1.5" Filler Plate. Learn More

TRANSTECTOR 92V Power Over Ethernet Surge Protector. RJ-45 connectors. Wall/pole mountable. Indoor/outdoor metal enclosure. Learn More

TIMES TNC male Advantage connector for LMR-400. Gold pin. Silver plate body, gold center pin. No braid trim. Learn More

ANDREW 6' SureFlex Jumper Consists of LDF4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER. Learn More

The Andrew F4A-NMNM-3-P SureFlex cable assembly process uses a 3 foot FSJ4-50B 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 3 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

RF INDUSTRIES N male connector for RG8X and Times LMR 240 cables. Silver plated body, gold pin. Solder pin, clamp on braid. Learn More

CommScope Plain End Pipe. 2 7/8" OD x 96" long. Galvanized steel. Learn More

PLATO ESD Safe Precision Lead Cutter cuts wire up to max diameter .040" (1 mm). A thin profiled tool with a permanently attached safety guard Learn More

The TerraWave TWS-100 braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. Learn More

The TerraWave TWS-200 flexible low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This low loss50 Ohm coax cable features a 90 percent coverage shield. It has a solid copper center conductor, stranded outer conductor, and polyethylene foam insulation. The transmission line features a PVC jacket with un-bounded aluminum tape allowing end stripping with automated cable prep tools. While designed for mobile antenna applications, it can be used in almost any application where handling characteristics, improved shield and low loss is required. The low loss coax cable has a comparable performance to RG142 cable and uses RG58 or RG142 connectors. The TerraWave TWS-200 low loss coax cable is available in bulk and sold per foot. Learn More

MAXRAD 136-174 MHz, 160 watt, quarter wave antenna with spring. No tuning required. Order desired Motorola type mount separately. Black. Learn More

WIRELESS SOLUTIONS 20' TWS-600 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More

The TerraWave 400-07-07-P50' coaxial cable assembly uses 50 feet of TWS-400 antenna extension cable. This cable jumper assembly connects N-style Male (Male center pin) connectors to both ends.The TerraWave 50 foot coax cable assembly includes heat shrink. Learn More

The TerraWave 195-07-18-P2' coaxial cable assembly uses 2 feet of TWS-195 antenna extension cable. This cable jumper assembly connects an N-style male (Male center pin) to a SMA Male (Male center pin).The TerraWave 2 foot coax cable assembly includes heat shrink. Learn More

LAIRD 450-470 MHz 6 element directional antenna. 10.2 dB gain 300 watt. Direct N female termination. Mounting hardware included. Gold anodized for long life. Learn More

WIRELESS SOLUTIONS 18" TWS-100 Antenna extension cable with RPSMA Female (F center pin) to N Female (M Center pin). Includes heat shrink. Learn More

WIRELESS Solutions 18" TWS-195 Antenna extension cable with N Female (M center pin) to RPSMA Female (F center pin). Includes heat shrink. Learn More

WIRELESS SOLUTIONS 18" TWS-100 Antenna extension cable with RPTNC Female (F center pin) to N- Style Female (M Center pin). Includes heat shrink. Learn More

The TerraWave 195-01-02-P2' coaxial cable assembly uses 2 feet of TWS-195 antenna extension coax cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC Female (Male center pin).The TerraWave 2 foot coax cable assembly includes heat shrink. Learn More

The PCTEL Maxrad NMO58AUSP vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58A/U coax cable and an UHF male (PL259) connector. Thread size is 1 1/8 inch - 18. Learn More

The PCTEL Maxrad NMOPFP195C vehicle roof mount antenna installation hardware kit is for Motorola-style high frequency mobile antennas up to 6000 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. NMO TNC Connector Learn More

The Wireless Solutions RG58NMSM-3 coaxial cable assembly uses 3 feet of RG58 cable. This cable jumper assembly is fitted with an N male (36421) connector and a SMA male (37467) connector. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

ANDREW straight Coax Adapter. N-Female to TNC Male.Tri-Metal finish to prevent tarnishing Learn More

POLYPHASER coax protector to be used in installations when DC is required to pass in route to tower top amplifiers and active antennas. +36 VDC. N/M - N/F. Learn More

COMMSCOPE 1/2" hanger adapter grommet. For use with 3/8" cable and 1/2" snap-in hangers, clip style hangers, or standard hanger kits. 10 per package Learn More

The PCTEL Maxrad NMO58UPL vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U cable and a mini UHF connector. Thread size is 1 1/8 inch - 18. Learn More

WIRELESS SOLUTIONS 3' LMR240 Jumper. Made of LMR240 with N Male (54919) on one end and SMA Male (55222) on the other end. Learn More

MAXRAD weatherproof trunk/hood groove bracket mount. Cable exits at 45 degree angle. Includes 17' RG58/U cable with no connector. Learn More

WIRELESS SOLUTIONS 4' TWS-400 Antenna extension cable with N Female (M center pin) to RPTNC Female (F center pin). Includes heat shrink. Learn More

WIRELESS 15' TWS-400 Antenna extension cable with RPTNC Female (F center pin) to RPTNC Jack (M center pin). Includes heat shrink. Learn More

PCTEL BMYD806K series yagi antenna is designed to provide characteristics of a high gain, broadband, premium-quality antenna. The yagi antenna operates in the frequency range 806 - 896 MHz and has a gain of 10 dBd. This 7-element antenna is supplied with a 2 foot RG213 pigtail with an N Female connector. The antenna is anodized for corrosion resistance and has a maximum power input of 200 watts. Includes mounting hardware BWC1001. PCTEL DMYD806K is heavy duty designed with harsh conditions in mind. Learn More

The Wireless Solutions LMR400NMNM-2 coaxial cable assembly uses 2 feet of LMR-400 cable. This cable jumper assembly is fitted with N male (14515) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 2 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

RoHS complaint, lead free data line surge protector for gigabit Ethernet, shielded RJ-45. Learn More

Learn More

Learn More

YAGI,SS,3,450-470MHz, Learn More

Get 360 degree views with this camera from MOBOTIX

Learn More

Get 360 degree views with this camera from MOBOTIX

• Discreetly monitor in 360° -
• Mount indoors or out - IP65 weatherproof 
• No need for additional recording software 

Learn More

More Camera For Less. Guaranteed! Learn More

More Camera For Less. Guaranteed! Learn More

The MX-Overvoltage-Protection-Box-RJ45 and MX-Overvoltage-Protection-Box-LSA can be used in most of the protection zones and provide a cost-efficient protection against surges. Learn More

Hemispheric Basic-Camera 360 D egree Day Learn More

Hemispheric Basic Camera With 90 Learn More

Hemispheric Security-Camera 36 0 Learn More

Hemispheric Security-Camera 36 0 Learn More

Q25 camera with L25 lens (82°) and B/W sensor, IP65, QXGA Learn More

Weatherproof thermographic PoE camera for detection plus a 5 MP sensor module for identification The modular design of the M15D system platform ensures maximum flexibility for the MOBOTIX thermographic camera. The M15D-Thermal comes standard with a thermal image sensor and a dummy module (to remain weatherproof to IP66). In addition, it is possible to use any MOBOTIX sensor modules (5 MP, color or black and white, telephoto to Hemispheric, with or without long-pass filter/LPF) in the M15D-Thermal for identification. Camera software is then used to activate the dual image display on one of the two image sensors (thermal or standard) or both simultaneously. Important Features High-end thermografic camera with thermal sensor of typically 50 mK and a temperature measuring range of -40 to +550°C/-40 to +1022°F The thermal sensor is capable of detecting in complete darkness and/or through smoke, smog, or a thin plastic screen (limited during thick fog); applications include border protection: view of the sea in coastal areas, ships in the distance can be recognized in hazy conditions. The combination with the MxActivitySensor in particular delivers extremely reliable video analysis results of person/vehicle movements, as it is now possible to block out disruptive factors such as regular movements of "cold" objects such as bushes, grass, water, clouds, waves etc. No glare from strong sources of light (such as headlights, hand-held lamps). Detection of hotter than average body parts or technical devices, detection of faults in photovoltaic systems, overheated machine bearings etc. Low camera power consumption of max. 5.5 W (thermal sensor plus 5 MP sensor module, without additional MxBus devices). The thermal image sensor is configured using camera software in a web browser; it is possible to display the thermal image with all other MOBOTIX user software (MxEasy, MxCC, App). Learn More

Mobotix Q25 IP Security Camera with Planet FSD-808p Learn More

TIMES MICROWAVE All-In-One Combination Prep Tool for prep of LMR240 cables for crimp or clamp connectors. Learn More

The ROHN R-SB25G short base section is designed to be placed into the ground and embedded in concrete to act as the connection between the tower foundation and the final section in the tower structure. Learn More