Mounts

COMMSCOPE Heavy Duty Welded Pipe to Pipe Clamp. Joins Two 1-1/2" OD to 3-1/2" OD round members. 1/2" x 10" threaded rod. Kit of 2. Hot dipped galv. Learn More

COMMSCOPE Small star support T bracket. Holds up to twelve hangers. 1-1/2" - 5-9/16" OD. Perpendicular style with hanger plates parallel to each other. Learn More

CommScope Plain Galvanized Pipe 3-1/2" OD x 174" Long. Learn More

COMMSCOPE Pipe to Pipe Clamp. Joins Two 1-1/2" OD to 3-1/2" OD round members, 1/2" x 10" threaded rod. Kit of 2. Hot dipped galvanized steel. Learn More

COMMSCOPE Saftey Grated Waveguide Bridge Kit. 12" wide x 10' long with two 10' 6" high base shoe posts. Hot dip galvanized steel. Learn More

COMMSCOPE 24" x 10' Grated Bridge Kit. 24" wide x 10' long with two 10' 6" high base shoe posts. Hot dip galvanized steel. Learn More

COMMSCOPE Two-hole compression ground lug. Terminates #6 AWG cable. 3/8" hole w/ slot will fit 0.750", .815" or 1.00" hole spacing. Pack of ten. Learn More

COMMSCOPE Panel Antenna Stand-off Bracket. 36" Stand-off distance. A 2-3/8" OD x 70" pipe is integrated into the bracket. Learn More

COMMSCOPE Crossover Plate. U-bolt style. 2-3/8" to 3-1/2" OD pipe. Hot dipped galvanized steel. Learn More

The Andrew Solutions DB5007 antenna side mount kit is for mounting Andrew antennas DB404, DB536, DB553, DB580, DB803 and DB806. This antenna mounting kit features galvanized steel construction and stainless steel hardware. The side mount kit bracket will hold antenna 13 inches away from the tower with 3 inch diameter legs.The Andrew antenna side mounting kit includes DB375 clamps, bracket, top sway brace, V-bolts, and mounting hardware. Learn More

COMMSCOPE mounting clamp kit. Fits round members up to 5" O.D. Angle members approx. 4-1/2" on a side. (Set of 2). Learn More

COMMSCOPE Galvanized U Bolt for 2-3/8" pipe. Size 3/8" diameter, 2-1/2" throat, 4" length, 2" thread. Comes with nuts and lock washers. Learn More

COMMSCOPE Cantilever wall mount bracket. Accepts standard 2 3/8" OD pipes. Stands pipe 2.75" off wall. Learn More

COMMSCOPE Adapter Clamp Set for up to 6 1/2", 60 Degree angle legs,straight or tapered legs. All mounting hardware is included. Learn More

The Andrew CM-30S-B heavy duty single chain mount kit includes an 8 foot chain and hardware to support one 2 3/8 inch pipe (not included). This low profile chain mount kit will support only one antenna on a round pole. The antenna pole mount kit is constructed of hot-dipped galvanized steel that is rust proof and weather-resistant. This chain mount is for mounting to an 8 to 30 inch outside diameter pole. The Andrew heavy duty single chain mount kit includes upper and lower brackets and 8 foot chain. Learn More

COMMSCOPE Heavy Duty Pipe to Pipe Clamp. Joins Two 2-3/8" OD to 5" OD round members. 5/8" x 14" threaded rod. Kit of 2. Hot dipped galvanized steel. Learn More

COMMSCOPE Pipe to Pipe Adapter for Vertical Leg. Adapts 1-1/2" thru 3-1/2" OD pipe to 2-3/8" thru 5" OD pipe. Kit of 2. Hot dipped galv steel. Learn More

COMMSCOPE adapter clamp set for up to 6 1/2", 90 degree angle, straight or tapered legs. All mounting hardware is included. Learn More

COMMSCOPE Crossover Plate. U-bolt style. 2-3/8" to 2-3/8" OD pipe. Hot dipped galvanized steel. Learn More

COMMSCOPE GPS antenna mount for attachment to a pipe 1-1/2"-3-1/2" OD. Ideal for use on an ice bridge post. Includes clamp and 24" x 1.9" pipe. HDG Learn More

The CommScope MC-RM1550-3 universal ring mount system allows for the attachment of a co-location platform, pipe frames, and antenna pipes to monopoles from 15 to 50 inches in diameter. This mounting system is a three sector version. For added durability these mounting brackets are constructed from hot-dipped galvanized steel.Order U-bolts, pipe support arms, pipes, and platforms separately. Learn More

COMMSCOPE Galvanized U Bolt for 2-3/8" pipe. Size 1/2" diameter, 2-1/2" throat, 4" length, 2" thread. Comes with nuts and lock washers. Learn More

COMMSCOPE mounting clamps for securing base antenna to wooden pole, tower leg, or mast up to 2-3/4" diameter. Can be rotated 90 degrees. Gold iridite alum. Learn More

The CommScope DB365W set of two mounting clamps are designed for mounting an antenna pipe to a wood pole. The clamp jaws fit around poles 1 1/4 to 3 1/2 inches in diameter. The antenna pole mount also will mount to masonry walls up to 10 inches thick. When mounting to masonry walls a 5/8 inch hole is required.Use the CommScope set of two mounting clamps to mount antennas to a wood pole or masonry wall. Learn More

COMMSCOPE adapter clamp set for stand-off bracket. Allows bracket to attach to an 4" to 9" OD vertical tower leg. Set of 2. Hot dip galvanized steel. Learn More

COMMSCOPE Pipe to Pipe Adapter for Vertical Leg. Adapts 1-1/2" thru 3-1/2" OD pipe to 4" thru 9" OD pipe. Kit of 2. Hot dipped galv steel. Learn More

COMMSCOPE Stand-off bracket for wood pole antenna mounting. Learn More