All Products

The Andrew 7577548-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the AWS band (1710-1755 MHz / 2110-2155 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More

The Andrew 7577552-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 1900 MHz PCS band (1850-1910 MHz / 1930-1995 MHz). The digital channel module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More

The Andrew 7577540-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 850 MHz cellular band (824 - 849 MHz / 869 - 894 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More

Andrew DB224-A 150 - 160 MHz omni, exposed dipole antenna. This adjustable field omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-0S pipe mount kit for 1.25 - 3.5 inch OD round members. Maximum power input is 500 watts. This four-bay exposed dipole VHF antenna can be arranged in an offset pattern producing a higher gain of 9 dB. Omni coverage and a gain of 6 dB can be achieved through a circular pattern. Andrew Solutions DB224 omni antenna meets RoHS 2002/95/EC. Learn More

Andrew DB499-K is a heavy duty yagi antenna operating in the 890 - 960 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More

COMMSCOPE 1-1/4" Hanger Grommet for 3/8" Cable, 10 Pack For use 1-1/4" snap-in hangers, clip style hangers, or standard hanger kits. Learn More

Andrew Solutions EZfit automated coax cable coring and stripping preparation tool is made for use with AVA5 HELIAX 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently. This drill-driven coring tool also includes a T-handle for manual hand operation.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. For fast, clean, and consistent cable preparations go with Andrew Solutions EZfit drill-driven automated cable preparation tools. Learn More

COMMSCOPE Standard grounding Kit for 5/8" & 7/8" (85, 90, 127A, 132 waveguide) with 24" lead and factory attached two hole lug. Learn More

ANDREW 1-1/4" torque wrench for 7-16 DIN coupling nut. Designed w/ a mechanism to audibly notify the installer that proper torque has been reached. Learn More

The Andrew HJ5-50 7/8 inch coaxial cable features an air dielectric. This 50 Ohm coax cable has an annular corrugated copper outer conductor and a smooth copper tube center conductor. The air cable has a 10 inch bending radius. This transmission line has a maximum frequency capacity of 5.2 GHz.The Andrew 7/8 inch coaxial cable with air dielectric is available in bulk and is priced per foot. Learn More

The Andrew F1A-PNMNM-4 Sureflex cable assembly uses a 4 foot FSJ1-50A 1/4 inch superflexible cable with foam dielectric. This coax cable assembly has N male (silver body, gold pin) connectors installed on each end.The Andrew 4 foot cable jumper assembly is 100 percent waterproof and uses a unique double solder patented technique to give excellent system performance. Learn More

COMMSCOPE 3M (TM) cold shrink weatherproofing Kit. Seals the connection between a 7/8" and 1/4" jumper w/N or DIN Connector. Learn More

CommScope Plain Galvanized Pipe 3-1/2" OD x 174" Long. Learn More

The Andrew L4A-NMDM-6-P SureFlex cable assembly process uses a 6 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN Male and N Male connectors installed on each end.The Andrew 6 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

COMMSCOPE Self-locking Hanger for 1/2" Radiating Cable. 100 per package. Black in color. Learn More

The Andrew CT-7812 combination tool aids in field installation of connectors on 1/2 and 7/8 inch coax cables. The Andrew combination tool / combination wrench features open wrench ends, chamfer tool, file, inner conductor gauge, and jacket cut-off gauge.Works with Heliax 2.0 and Positive Stop connectors. Learn More

COMMSCOPE stand. port cushion. For 1-1/4" corrugated cables. One hole. Learn More

The Andrew L4A-NMNM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

COMMSCOPE SureGround for 7/8" Alum or Copper, corrugated or smooth cable w/ 24" #6 copper ground wire lead. Inlcudes factory attached two hole lug. Learn More

COMMSCOPE 1/2" hanger adapter grommet. For use with 3/8" cable and 1/2" snap-in hangers, clip style hangers, or standard hanger kits. 10 per package Learn More

SnapSeal 4" boot assembly kit w/ 3 hole for 7/8" corrugated coax. Learn More

Andrew Solutions EASIAX manual cable preparation tool is made for use with 1/2 inch HELIAX coaxial cable, including: LDF4-50, HL4RP-50 and RXL4 series inch foam dielectric cables. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More

CommScope Snap-In Hangers for EW52 Waveguide attach without hardware. Constucted of heavy gauge stainless steel. Spacing varies depending on wind. Learn More

COMMSCOPE 4" Cable Entry Boot. For 1 run of EW90. Use with Multiple Entrance Wall Plate. Learn More

COMMSCOPE "SNAPSTAK" Snap-in hangers for 1/2" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More

COMMSCOPE Hardware Kit. 3/8" x 3/4" fillister head bolts, nuts and lock washers. Heavy gauge stainless steel construction. Kit of 10 sets. Learn More

COMMSCOPE "SNAPSTAK" Snap-in hangers for 1-1/4" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More

ANDREW SnapStak Hanger Tool for installation and removal of SnapStak snap-in hangers. Learn More

COMMSCOPE Grounding Kit for 1/4" & 3/8" diameter cables. Includes 24" ground wire w/ solid copper strap, weatherproffing, and two hole lug. Learn More

Learn More

CommScope cable hanger kit for use with 7/8" diameter cables and elliptical waveguide 85 and 90. Package of ten. Use one every three feet. Learn More

COMMSCOPE Click-On Hangers. For use with AVA5-50 & LDF5-50A 7/8" diameter cable. Pkg of 10. Rec spacing every 4' up to 100mph wind speed,3' up to 150. Learn More

ANDREW SMA Male for 1/4" superflex. Cativated center pin with clamp style body attachment. Learn More

COMMSCOPE Hoisting Grip for 1/2" Corrugated Cables. Use at 200ft intervals to raise cable on tower. Can also be used with EW180, EW220 & EW240 waveguides. Learn More

CommScope Stiff Arm Mounting Bracket. Creates a stiff arm out of a separately ordered 2 3/8"OD pipe. Mounts to 2-3/8" thru 4-1/2" round or angle legs. Learn More

CommScope Standard Hangers for EW63 hardware not included. Heavy gauge stainless steel. Spacing varies depending on wind speed & cable.10 pack. Learn More

COMMSCOPE Click-On Hanger Hardware Kit for 1/2",5/8" or 7/8" coaxial cable. For use with 1 stack hanger in 3/8" size. Constructed of stainless steel. Learn More

COMMSCOPE Grounding Kit for 1/2" diameter cables. Two hole lug for grounding to a tower/ bus bar. Incl 24" grnd cable w/ solid copper strap and weatherproofing. Learn More

COMMSCOPE 3M (TM) cold shrink weatherproofing Kit. Seals the connection between the direct termination of an antenna & 1/2" jumper. Installs in less than 3 minutes. Learn More

ANDREW mini UHF male (F1MU) connector for FSJ1-50A, 1/4" superflexible Heliax cable. Captivated silver pin, crimp ferrule. Nickle body. Learn More

COMMSCOPE 2 3/8" x 63" Plain end pipe. Hot Dipped Galvanized steel. Learn More

The Andrew 7574285-00 blank dummy module is for the node A repeater system. This amplifier module fills any unused slot in the repeater. The Andrew dummy BDA module should be used to maintain correct airflow in the subrack. Learn More

Andrew Solutions EASIAX manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including: AVA5, LDF5, and VXL5. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More

Andrew EASIAX manual cable preparation tool is made for use with 3/8 inch and 1/2 inch superflex HELIAX coaxial cables, including: FSJ2, FSJ4, ETS2, RXL2 and RXL4. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew EASIAX cable preparation tools. Learn More

COMMSCOPE 1/4" x 2-1/2" x 12-1/2" Universal Ground Bar. Made of solid copper with 33 pre-drilled holes. Ideal for all grounding app's incl towers & rooftops. Learn More

COMMSCOPE Click-On Hanger Hardware Kit for 1/2",5/8" or 7/8" coaxial cable. For use with 3 stack hanger in 3/8" size. Constructed of stainless steel. Learn More

COMMSCOPE Click-On Hangers. For use with LDF4-50A 1/2" diameter cable. Package of 10. Recommended spacing every 3' up to 150 mph wind speed, 2'over 150 mph. Learn More

CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More

The Andrew CNT400P braided coaxial cable (white jacket) is similar to RG8 but with lower loss and plenum-rated. This 50 Ohm coax cable has a 90 percent coverage braid shield for low loss. This plenum-rated transmission line offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization with LMR-400 connectors. The braided coax, plenum grade cable can be used in almost any application where handling characteristics, improved shielding and low loss is required. The Andrew WBC-400 plenum-rated, low loss coaxial cable with white jacket is available in bulk and is priced per foot. Learn More

SnapStak Hangers for 1/2 in coaxial cable with quadruple stack capability and includes reinforcement bar. Learn More

CommScope V-Stabilizer Tower Kit. Learn More

CommScope Plain End Pipe 2-7/8" x 150" Learn More

ANDREW Click-On Hanger Hardware Kit for 1-1/4" or 1-5/8" coaxial cable. For use with 3 stack hanger in 3/8" size. Constructed of stainless steel. Learn More

Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with LDF4-50A HELIAX 1/2 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More

CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction. Quadruple stack capability, includes reinforcement bar. Learn More

ANDREW 10' SureFlex Jumper Consists of FSJ4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER with Sureguard weatherproofing. Learn More

COMMSCOPE 1/2" Plenum Air 50 ohm cable. HL4RPV-50. Uses LDF4 connectors. Off White.*No automated prep tool available.MCPT-L4 is the prep tool that works. Learn More

1/4" x 4" x 14" Universal Ground Bar. Made of solid copper with 30 pairs of universal 3/8" hole over 3/8" x 5/8" slot. Wall or tower mount. Learn More

ANDREW 1/4" x 2" x 10" Universal Ground Bar. Made of solid copper with 10 pairs of universal 3/8" hole over 3/8" x 5/8" slot. Wall or tower mount. Andrew's Universal Ground Bar is competitively priced and offers the mounting flexibility so often needed at sites. This solid copper bar accommodates vertical and 90 degree mounting configurations and provides a central point to collect grounding leads. Learn More

Learn More

The Commscope HELIAX Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacket. Learn More

Andrew DB224-E, 138 - 150 MHz omni exposed dipole antenna. This field adjustable VHF omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has 6 dBd gain and the offset has 9 dBd gain. The Andrew Solutions omni, exposed dipole antenna meets RoHS 202/95/EC. Learn More

COMMSCOPE SureGround for 1/2" Al or Cu corrugated or smoothwall coaxial cable. Tinned copper clip with 48" #6 copper bond & field attached, 2 hole lug. Learn More

ANDREW 30' SureFlex Jumper. Consists of FSJ4-50B 1/2" superflexible cable with DIN Male on one end and Right Angle DIN Male on the other end. Learn More

COMMSCOPE stand. port cushion. For 7/8" corrugated cables. Three hole. Learn More

The Andrew L4A-DMDM-12-P SureFlex cable assembly process uses a 12 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 12 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

ANDREW 15' SureFlex Jumper. Consists of FSJ4-50B 1/2" superflexible cable with DIN Male on one end and Right Angle DIN Male on the other end. Learn More

ANDREW Aluminum Grounding Kit Preparation Tool for 7/8" corrugated cable SG series grounding kits Learn More

COMMSCOPE SureGround for 1-1/4" copper or aluminum, smooth or corrugated cable w/ 48" lead, unattached universal lug and weatherproofing. Learn More

Andrew DB224-C covers the 164 - 174 MHz omni, exposed dipole antenna. This field adjustable VHF omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has a 6 dBd gain and the offset has 9 dBd gain. The Andrew Solutions omni, exposed dipole antenna meets RoHS 2002/95/EC. Learn More

COMMSCOPE Galvanized U Bolt for 2-3/8" pipe. Size 3/8" diameter, 2-1/2" throat, 4" length, 2" thread. Comes with nuts and lock washers. Learn More

The Andrew 7597821 indoor wall mounting kit is for both node A2 and node A4 chassis. Additional mounting kits are available for outdoor wall mounting and outdoor pole mounting. Learn More

COMMSCOPE stand. port cushion. For 7/8" corrugated cables. One hole. Learn More

COMMSCOPE stand. port cushion. For 1/2" corrugated cables. Two hole. Learn More

COMMSCOPE 1-1/4" Hanger Grommet for 5/8" Cable, 10 Pack For use 1-1/4" snap-in hangers, clip style hangers, or standard hanger kits. Learn More

Andrew DB420-B omnidirectional, exposed dipole antenna operates in the 450 - 470 MHz frequency range. This UHF omni dipole antenna is 9.2 dBd gain, can handle up to 250 watts and is terminated with an N male connector at the end of a flexible lead. Included wit the antenna is a DB356-OS pipe mount lit for 1.25 - 3.5 inch OD round members. Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations and is extremely rugged. This antenna meets RoHS 2002/95/EC.
Additional shipping charges may apply- ships freight only. Learn More

Andrew DB499-A is a heavy duty yagi antenna operating in the 806 - 869 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More

Andrew DB411-B quasi omnidirectional, exposed dipole antenna operates in the 450 - 470 MHz frequency range. The 9 dB gain antenna can handle up to 250 watts. This UHF dipole antenna is terminated with an N male connector at the end of a flexible lead. Included with the antenna is a DB365-OS pipe mounting kit for 1.25 - 3.5 inch OD round members. The Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations. The DB411 is extremely rugged and is moisture resistant. The antenna meets RoHS 2002/95/EC. Learn More

The Andrew L4A-DMDM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

ANDREW 1/2" Aluminum Ground Kit Strip Tool for LDF4-50 foam cable. Manually operated for SG Series. Learn More

The Andrew L4A-NMNM-3-P SureFlex cable assembly process uses a 3 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 3 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

ANDREW 20' SureFlex Jumper Consists of LDF4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER. Learn More

The Andrew L4A-DMDM-30-P SureFlex cable assembly process uses a 30 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 30 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

COMMSCOPE EASIAX Plus Automated Cable Preparation Tool for 1/2" coaxial cable. Learn More

57 VDC rectifier module for the ION-E system Learn More

Manual Cable Preparation Tool for 7/8 in coaxial Learn More

Copper Ground Buss Bar, 1/4 in x 4 in x 24 in Learn More

Electrical PVC Tape BLACK 2 X 20'" Learn More

COMMSCOPE Hoist Grip 1-1/4 LDF6-50 Heliax Cable" Learn More

2RU Fiber Patch Panel with Removable Lid Learn More

Teletilt Top Smart Bias Tee Learn More

30' LDF4-50A Jumper 7/16 DIN(M) - 7/16 DIN(M) R/A Learn More

4 4 Port Entry Feed-thru" Learn More

2-3/8 OD x 150" Long - Plain End Pipe" Learn More

N-Male Positive Stop for 7/8 AVA5-50" Learn More

COMMSCOPE Hoisting Grip 1-1/4 Cable" Learn More

Univ Blank Panel for the ION-E system Learn More

4 Boot Assy Learn More

Power Supply Filler Panel Learn More

UAP, 10G, Expansion Port, Integrated Antenna Learn More

COMMSCOPE 1/2" radiating mode cable with fire -retardant, halogen free polyolefin jacket. Learn More

20m OS2 4F LC/UPC - LC/UPC Learn More

6' D-CLASS LDF4-50 4.3-10 Male to 4.3-10 Male Learn More

N Female - 4.3/10 Male Low Pim Adaptor Learn More

3/8 Superflex Cable Learn More

10m OS2 4F LC/UPC - LC/UPC Learn More

GigaSPEED Modular Patch Cord, Blue Jacket, 2M Learn More

15' Hybrid Fiber Tails SM 1 x 1, 2 Fiber-6-OVP Box Learn More

Tinned Copper Ground Buss Bar Learn More

ANDREW 30' LDF4-50, DIN Male/DIN Male, Sureguard Learn More

Learn More

Learn More

Learn More