Pro Telecom Supply is a leading supplier of Commercial and Industrial Communications products. We carry the parts and equipment you need to complete your project on time and affordably. Our partnerships with the leading vendors in telecommunications gives you access to some of the worlds best technology products. Whether you are completing an RF project, or need components for your mobile workforce, Pro Telecom Supply has you covered.
All Products
-
CommScope - NODE A AWS 0.5W Amplifier Module$2,685.50The Andrew 7577548-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the AWS band (1710-1755 MHz / 2110-2155 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
CommScope - NODE A PCS 0.5W Amplifier Module$2,755.81The Andrew 7577552-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 1900 MHz PCS band (1850-1910 MHz / 1930-1995 MHz). The digital channel module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
CommScope - NODE A Cellular 0.5W Amplifier Module$2,755.97The Andrew 7577540-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 850 MHz cellular band (824 - 849 MHz / 869 - 894 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
RF Industries - N Female Bulkhead/RG142$8.12RF INDUSTRIES Female crimp bulkhead w/ rear mount and O ring connector for RG142.Nickel body and gold center pin. Learn More
-
RF Industries - Mini UHF/M - BNC/F Adapt$4.52RF INDUSTRIES Mini-UHF male to BNC female straight adapter. Learn More
-
RF Industries - TNC/F - BNC/F Adapter$6.15RF INDUSTRIES TNC female to BNC female adapter. Learn More
-
RF Industries - BNC/F Tee Adaptor$6.69RF INDUSTRIES BNC female 3-way Tee adapter. Nickle plated body, silver contacts, Teflon insulated. Learn More
-
RF Industries - BNC/M - BNC/M Adapter$5.12RF INDUSTRIES BNC male to BNC male straight adapter. Nickle plated body, silver plated contacts. Learn More
-
RF Industries - TNC/F - SMA/M Adapter$6.29RF INDUSTRIES TNC female to SMA male straight adapter. Learn More
-
RF Industries - SMA/M - BNC/F Adapter$5.70RF INDUSTRIES SMA male to BNC female straight adapter. Nickle plated body, gold plated contacts. Learn More
-
RF Industries - BNC Male Crimp-RG58,RG141$2.98RF INDUSTRIES BNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
CommScope - 150-160 MHz 6/9dB Exposed Dipole Omni Antenna$833.56Andrew DB224-A 150 - 160 MHz omni, exposed dipole antenna. This adjustable field omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-0S pipe mount kit for 1.25 - 3.5 inch OD round members. Maximum power input is 500 watts. This four-bay exposed dipole VHF antenna can be arranged in an offset pattern producing a higher gain of 9 dB. Omni coverage and a gain of 6 dB can be achieved through a circular pattern. Andrew Solutions DB224 omni antenna meets RoHS 2002/95/EC. Learn More
-
CommScope - 896-960 MHz 10dB 7 Element Yagi Antenna$408.84Andrew DB499-K is a heavy duty yagi antenna operating in the 890 - 960 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More
-
RF Industries - SMA/M - Mini-UHF/F Adapter$6.22RF INDUSTRIES SMA male to Mini UHF femal straight adapter. Nickle plated body, gold plated contacts. Learn More
-
RF Industries - TNC Male Crimp-LMR-200$3.06RF INDUSTRIES TNC male connector for LMR-200. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - SMA Male Rt Angle/ RG8X$7.54RF INDUSTRIES SMA male right angle conn. RG8X, RG30, LMR240 cables. Learn More
-
RF Industries - BNC/F - TNC/M Adapter$5.27RF INDUSTRIES BNC female to TNC male straight adapter. Learn More
-
RF Industries - N Female/UHF Male Adapter$7.91RF INDUSTRIES N female to UHF male adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - Mini-UHF Female/ N Male$6.91RF INDUSTRIES Mini-UHF female to N male adapter. Learn More
-
RF Industries - N Female "T" Adapter$11.23RF INDUSTRIES N female "T" adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - D/F-N/F Barrell Adapter$41.10RF INDUSTRIES 7/16 DIN Female to N Female Low-PIM barrell adapter. Silver Plating contact and body. Learn More
-
RF Industries - SMA Male/ Right Angle$5.38RF INDUSTRIES SMA male right angle for RG58/U, 58A/U, 58C, 141, 141A, 142, 142A, 223, 400 and Ultralink cable. Learn More
-
RF Industries - BNC Male Crimp-RG58,RG141$3.02RF INDUSTRIES BNC male connector for RG58, RG58A/U, RG141 & Ultralink mobile cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
CommScope - 1-1/4"Hanger Grommet for 3/8" Cable, 10 Pack$32.39COMMSCOPE 1-1/4" Hanger Grommet for 3/8" Cable, 10 Pack For use 1-1/4" snap-in hangers, clip style hangers, or standard hanger kits. Learn More
-
CommScope - 7/8" AVA-5 Automated Prep Tool$791.70Andrew Solutions EZfit automated coax cable coring and stripping preparation tool is made for use with AVA5 HELIAX 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently. This drill-driven coring tool also includes a T-handle for manual hand operation.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. For fast, clean, and consistent cable preparations go with Andrew Solutions EZfit drill-driven automated cable preparation tools. Learn More
-
RF Industries - BNC Male-RG8, 8A & 213$6.59RF INDUSTRIES BNC male connector for RG8, RG8A & RG213 cables. UG-959A/U. Nickle plated body with gold solder (.100) center pin, clamp on braid. Learn More
-
RF Industries - SMA Male Crimp-RG-8X$3.68RF INDUSTRIES SMA male connector for RG8X, RG30, LMR240 cables. Solder Center Pin. Learn More
-
RF Industries - N Male/UHF Female Adapter$7.95RF INDUSTRIES N male to UHF female adapter. Silver plated body, gold plated contacts. Learn More
-
CommScope - Standard Grounding Kit for 5/8" and 7/8"$38.37COMMSCOPE Standard grounding Kit for 5/8" & 7/8" (85, 90, 127A, 132 waveguide) with 24" lead and factory attached two hole lug. Learn More
-
CommScope - Torque Wrench, 1-1/4", 7-16 DIN Coupling Nut$119.27ANDREW 1-1/4" torque wrench for 7-16 DIN coupling nut. Designed w/ a mechanism to audibly notify the installer that proper torque has been reached. Learn More
-
CommScope - 7/8" Air Cable$14.29The Andrew HJ5-50 7/8 inch coaxial cable features an air dielectric. This 50 Ohm coax cable has an annular corrugated copper outer conductor and a smooth copper tube center conductor. The air cable has a 10 inch bending radius. This transmission line has a maximum frequency capacity of 5.2 GHz.The Andrew 7/8 inch coaxial cable with air dielectric is available in bulk and is priced per foot. Learn More
-
CommScope - ANDREW 4' FSJ1-50A Jumper, N Male$39.90The Andrew F1A-PNMNM-4 Sureflex cable assembly uses a 4 foot FSJ1-50A 1/4 inch superflexible cable with foam dielectric. This coax cable assembly has N male (silver body, gold pin) connectors installed on each end.The Andrew 4 foot cable jumper assembly is 100 percent waterproof and uses a unique double solder patented technique to give excellent system performance. Learn More
-
RF Industries - BNC/F - BNC/F Bulkhead$5.10RF INDUSTRIES BNC female to BNC female bulkhead adapter with O-ring. Nickle plated body, gold plated contacts. Learn More
-
CommScope - SSM - Jumper Cold Shrink (7/8" to 1/4")$40.19COMMSCOPE 3M (TM) cold shrink weatherproofing Kit. Seals the connection between a 7/8" and 1/4" jumper w/N or DIN Connector. Learn More
-
RF Industries - Mini-UHF/F - FME/M Adapter$3.46RF INDUSTRIES Mini-UHF female to FME male (Euro Nipple) adapter. Learn More
-
CommScope - Plain Pipe3-1/2" OD x 174" Long$367.57CommScope Plain Galvanized Pipe 3-1/2" OD x 174" Long. Learn More
-
RF Industries - SMA/F-SMA/M Adapter-RA$9.65RF INDUSTRIES Interseries Adapter. SMA female to SMA male right angle adapter. Gold plated center pin and body. Teflon dielectric. Learn More
-
RF Industries - TNC Male Clamp-9913,LMR40$8.12RF INDUSTRIES TNC male connector for Belden 9913 and Times LMR400 cables. Silver plated body, gold plated center p pin. Solder center pin, clamp on braid. Learn More
-
CommScope - ANDREW 6' LDF4-50 Low PIM Jumper NM - DM$41.33The Andrew L4A-NMDM-6-P SureFlex cable assembly process uses a 6 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN Male and N Male connectors installed on each end.The Andrew 6 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
RF Industries - SMA/ - SMA/F Adapter$4.64RF INDUSTRIES SMA female to SMA female straight adapter. Nickle plated body, gold plated contacts. Learn More
-
RF Industries - N Male RG8X/LMR240 Size$10.66RFI Hex/Knurl Combo N male for RG8X/240 Captivated center pin, crimp ferule. Silver plated body, gold center pin. Learn More
-
CommScope - Self-locking Hanger 1/2", Black$95.25COMMSCOPE Self-locking Hanger for 1/2" Radiating Cable. 100 per package. Black in color. Learn More
-
RF Industries - Strip Tool, LMR400, RG214, N Male$62.51RF Industries cable stripper easily cuts jacket, braid and dielectric in one step. This strip tool quickly prepares LMR 400 type cables. The coax three-level stripper preps a wide variety of popular cables including LMR 400, RG 214, RG 8, RG 213, Belden 9913, and Cushcraft 93605. RF Industries coax stripper is designed to prevent over-penetration and cable distortion. Strip lengths are manufactured to industry standards. Learn More
-
RF Industries - BNC/F - SMA/F Adapter$4.72RF INDUSTRIES BNC female to SMA female adapter. Use with Motorola cellular phones. For use with OKI 900 cellular phones, use sku# 72604. Learn More
-
RF Industries - UHF Male for 1/2" LDF4-50A, LCF12-50J$34.48RFI UHF Male Connector for LDF4-50A & LCF12-50J. Captivated silver center pin. White bronze plated brass body. Includes 2 o-rings and silicone tube. Learn More
-
RF Industries - SMA Female Crimp-RG174$4.81RF INDUSTRIES SMA female connector for RG174, RG188, RG316 cables. Nickel plated body, gold plated pin, teflon dielectric. Crimp attachment. Learn More
-
RF Industries - TNC Male Crimp-RG142,RG55$3.82RF INDUSTRIES TNC male connector for RG142/U & RG55/U. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Delrin Dialectric. Learn More
-
CommScope - Combination Tool for 1/2" and 7/8" Cable$101.55The Andrew CT-7812 combination tool aids in field installation of connectors on 1/2 and 7/8 inch coax cables. The Andrew combination tool / combination wrench features open wrench ends, chamfer tool, file, inner conductor gauge, and jacket cut-off gauge.Works with Heliax 2.0 and Positive Stop connectors. Learn More
-
RF Industries - UHF Male Crimp-RG8X,LMR24$3.43RF INDUSTRIES UHF male connector for RG8X and Times LMR-240 cables. Nickle plated body, silver plated pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - Crimp Tool Kit: 2 Universal Frames & 2 Die sets$248.05RF Industries cable crimp tool kit allows you to terminate most coaxial and datacom connectors for RG58, RG59, Proflex, RG8, and RG214 among other cables. The crimp tool kit includes two cable crimper along with two die set. Die set one crimps to the following sizes: square 0.052 inch and hex 0.068, 0.100, 0.213, and 0.255 inches. Die set two crimps to the following sizes: hex 0.100, 0.128, and 0.429 inches. The ergonomically-designed crimping tool will last over 50,000 crimp cycles. A handy chart inside the lid indicates which interchangeable die is correct for the particular cable youre working with. Dies are precision die cast to provide long field service use and are easily changed. Learn More
-
RF Industries - SMA Male Crimp-RG58,RG141$2.87RF INDUSTRIES SMA male connector for RG58/U, 58A/U, 58C, 141, 141A, 400 and Ultralink cable. Also RG55, 142 & 223 w/SKU 63972 ferrule. Solder center pin. Learn More
-
-
RF Industries - UNIDAPT - Unidapt "T" Adapter$15.67RF INDUSTRIES unidapt "T" adapter. Use with any unidapt section to make the "T" connection you need. Learn More
-
CommScope - 1-1/4"Round Cushion$5.78COMMSCOPE stand. port cushion. For 1-1/4" corrugated cables. One hole. Learn More
-
CommScope - 15' LDF4-50 Low PIM Jumper NM - NM$54.08The Andrew L4A-NMNM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
CommScope - SureGround Grounding Kit, (7/8')$31.89COMMSCOPE SureGround for 7/8" Alum or Copper, corrugated or smooth cable w/ 24" #6 copper ground wire lead. Inlcudes factory attached two hole lug. Learn More
-
RF Industries - N Male-RG8X,LMR240$8.20RF INDUSTRIES N male connector for RG8X and Times LMR 240 cables. Silver plated body, gold pin. Solder pin, clamp on braid. Learn More
-
CommScope - 3/8" Cable Insert For 1/2" Hangers, 10 Pack$10.30COMMSCOPE 1/2" hanger adapter grommet. For use with 3/8" cable and 1/2" snap-in hangers, clip style hangers, or standard hanger kits. 10 per package Learn More
-
CommScope - 4" BootAssy, (3) 7/8"$52.88SnapSeal 4" boot assembly kit w/ 3 hole for 7/8" corrugated coax. Learn More
-
CommScope - 1/2" LDF4-50 Easiax Prep Tool$26.73Andrew Solutions EASIAX manual cable preparation tool is made for use with 1/2 inch HELIAX coaxial cable, including: LDF4-50, HL4RP-50 and RXL4 series inch foam dielectric cables. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More
-
RF Industries - UNIDAPT - Unidapt 7/16 DIN Female Connector$31.42RF INDUSTRIES 7/16 DIN female unidapt connector. Use with female barrel to create inter-series adapters. Learn More
-
CommScope - SSM - EW52Waveguide Snap-In Hanger Kit$125.71CommScope Snap-In Hangers for EW52 Waveguide attach without hardware. Constucted of heavy gauge stainless steel. Spacing varies depending on wind. Learn More
-
CommScope - 4" CableEntry Boot for EW90, 1 Hole$75.97COMMSCOPE 4" Cable Entry Boot. For 1 run of EW90. Use with Multiple Entrance Wall Plate. Learn More
-
CommScope - SSM - SnapStak Stackable Hangers, (1/2")$21.87COMMSCOPE "SNAPSTAK" Snap-in hangers for 1/2" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More
-
RF Industries - BNC Male, RG6, 75 ohm$3.10RF INDUSTRIES 75 Ohm, BNC male connector for RG6 cable. Nickle plated body, gold pin. Crimp ferrule, solder pin. Learn More
-
CommScope - HardwareKit, 3/8" x 3/4"$13.15COMMSCOPE Hardware Kit. 3/8" x 3/4" fillister head bolts, nuts and lock washers. Heavy gauge stainless steel construction. Kit of 10 sets. Learn More
-
RF Industries - Mini UHF/M - Mini UHF/M$6.03RF INDUSTRIES Mini-UHF male to Mini-UHF male straight adapter. Learn More
-
CommScope - SnapStak Hangers for 1-1/4" corrugated cable$27.38COMMSCOPE "SNAPSTAK" Snap-in hangers for 1-1/4" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More
-
RF Industries - Right Angle SMA Male RP for RG58$5.93RF INDUSTRIES SMA male right angle connector *REVERSE* POLARITY for RG58, RG141, Times LMR195 cables. Gold plated body, gold plated pin. Crimp. Learn More
-
RF Industries - Mini-UHF Male/ UHF Female$6.17RF INDUSTRIES Mini-UHF male to UHF female adapter. Learn More
-
RF Industries - Reverse Gender TNC/M - TNC/F Adapter$7.28RF INDUSTRIES Reverse Polarity/Gender TNC male to TNC female adapter. Learn More
-
CommScope - SnapStak Hanger Tool$74.18ANDREW SnapStak Hanger Tool for installation and removal of SnapStak snap-in hangers. Learn More
-
RF Industries - SMA Male Crimp-RG142/U & RG400$3.87RF INDUSTRIES SMA male crimp connector for RG142, 55, 223 and RG400 cables. Learn More
-
RF Industries - Rev. Gender SMA male$4.61RFI SMA reverse gender crimp connector. Male body, female contact. Gold plated body, Gold center pin. For RG58, 141 and Times LMR195 cables. Learn More
-
CommScope - Grounding Kit 1/4" and 3/8"$29.24COMMSCOPE Grounding Kit for 1/4" & 3/8" diameter cables. Includes 24" ground wire w/ solid copper strap, weatherproffing, and two hole lug. Learn More
-
RF Industries - BNC Male Crimp-RG58,RG141$4.41RF INDUSTRIES BNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Silver plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
CommScope - Hanger for 7/8" Cable & Elliptical Waveguide 85/90$20.01CommScope cable hanger kit for use with 7/8" diameter cables and elliptical waveguide 85 and 90. Package of ten. Use one every three feet. Learn More
-
CommScope - Click On Hangers AVA/LDF5-50A, 10 pack$33.33COMMSCOPE Click-On Hangers. For use with AVA5-50 & LDF5-50A 7/8" diameter cable. Pkg of 10. Rec spacing every 4' up to 100mph wind speed,3' up to 150. Learn More
-
RF Industries - N Male/BNC Female Adapter$7.33RF INDUSTRIES N male to BNC female adapter. Silver plated body, gold plated contacts. Learn More
-
CommScope - SMA Male 1/4" Superflex$27.24ANDREW SMA Male for 1/4" superflex. Cativated center pin with clamp style body attachment. Learn More
-
CommScope - HoistingGrip 1/2" Cable$15.74COMMSCOPE Hoisting Grip for 1/2" Corrugated Cables. Use at 200ft intervals to raise cable on tower. Can also be used with EW180, EW220 & EW240 waveguides. Learn More
-
RF Industries - UNIDAPT - Unidapt 7/16 DIN Male Connector$28.25RF INDUSTRIES 7/16 DIN male unidapt connector. Use with female barrel to create inter-series adapters. Learn More
-
CommScope - SSM - StiffArm Mounting Bracket$83.46CommScope Stiff Arm Mounting Bracket. Creates a stiff arm out of a separately ordered 2 3/8"OD pipe. Mounts to 2-3/8" thru 4-1/2" round or angle legs. Learn More
-
RF Industries - Mini-UHF Female/ UHF Male$6.44RF INDUSTRIES Mini-UHF female to UHF male adapter. Learn More
-
CommScope - SSM - Standard Hanger Kit, (EW63 Waveguide)$49.56CommScope Standard Hangers for EW63 hardware not included. Heavy gauge stainless steel. Spacing varies depending on wind speed & cable.10 pack. Learn More
-
RF Industries - Mini-UHF/M - FME/M Adapter$4.54RF INDUSTRIES Mini-UHF male to FME male (Euro Nipple) adapter. Learn More
-
CommScope - Hanger Hardware Kit, 3/8",1 Stack$25.69COMMSCOPE Click-On Hanger Hardware Kit for 1/2",5/8" or 7/8" coaxial cable. For use with 1 stack hanger in 3/8" size. Constructed of stainless steel. Learn More
-
CommScope - Grounding Kit 1/2", 2 Hole$31.01COMMSCOPE Grounding Kit for 1/2" diameter cables. Two hole lug for grounding to a tower/ bus bar. Incl 24" grnd cable w/ solid copper strap and weatherproofing. Learn More
-
RF Industries - SMA Male/ Right Angle/RG174$5.00RF INDUSTRIES SMA male right angle for RG174, 188, 188A and 316 cables. Solder center pin. Learn More
-
RF Industries - MiniUHF Male Crimp-RG58$2.75RF INDUSTRIES black mini-UHF male crimp connector for RG58 cables. Requires proper crimping tool for installation. Four piece assembly. Learn More
-
CommScope - SSM - Jumper Cold Shrink (Antenna to 1/2")$23.55COMMSCOPE 3M (TM) cold shrink weatherproofing Kit. Seals the connection between the direct termination of an antenna & 1/2" jumper. Installs in less than 3 minutes. Learn More
-
RF Industries - TNC Male Rt. Angle/LMR240$6.58RF INDUSTRIES TNC male right angle crimp connector for LMR240 cable. Nickle plated body, gold plated center pin, teflon dielectric. Learn More
-
RF Industries - BNC Male, RG59,62/ 75 ohm$3.09RF INDUSTRIES BNC male connector for RG59, 59A, 59B, 62, 62A, 62B, 62C and 210 cables. Nickle plated body, gold pin Crimp pin & braid. 75 ohm. Learn More
-
RF Industries - UHF Male Crimp-PROFLEX$3.31RF INDUSTRIES UHF male connector for PROFLEX and Times AA3096 cables. Nickle plated body and silver plated contacts. Crimp center pin, crimp on braid. Learn More
-
CommScope - MiniUHF Male (F1MU) FSJ150A$13.87ANDREW mini UHF male (F1MU) connector for FSJ1-50A, 1/4" superflexible Heliax cable. Captivated silver pin, crimp ferrule. Nickle body. Learn More
-
RF Industries - Rev. Polarity N/M - N/F Adapter$9.35RFI Reverse Polarity N/Male (Female) to standard N/Female (jack). Nickle plated brass body, gold center pin. Learn More
-
CommScope - Plain EndPipe 2 3/8 x 63$58.74COMMSCOPE 2 3/8" x 63" Plain end pipe. Hot Dipped Galvanized steel. Learn More
-
CommScope - NODE ABlank Dummy Module$70.55The Andrew 7574285-00 blank dummy module is for the node A repeater system. This amplifier module fills any unused slot in the repeater. The Andrew dummy BDA module should be used to maintain correct airflow in the subrack. Learn More
-
RF Industries - TNC Male Rt. Angle/RG142$6.74RF INDUSTRIES TNC male right angle connector for RG142. Nickle plated body, gold plated center pin, teflon dielectric. Crimp connector. Learn More
-
RF Industries - SMA Male Crimp-RG8/U, LMR400$7.52RF INDUSTRIES SMA male connector for RG8/U, 9913, LMR400 Learn More
-
CommScope - 7/8" Easiax Prep Tool AVA5-50, LDF5-50A$39.24Andrew Solutions EASIAX manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including: AVA5, LDF5, and VXL5. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More
-
CommScope - 3/8" & 1/2" Superflex Prep Tool$28.85Andrew EASIAX manual cable preparation tool is made for use with 3/8 inch and 1/2 inch superflex HELIAX coaxial cables, including: FSJ2, FSJ4, ETS2, RXL2 and RXL4. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew EASIAX cable preparation tools. Learn More
-
RF Industries - MiniUHF Female Crimp-RG142/223/400$3.75RF INDUSTRIES Mini-UHF female connector for RG142, 55, 223 and 400 cables. Nickle plated body, silver pin. 3 piece construction, crimp style. Learn More
-
RF Industries - SMA/F-SMA/M Adapter-RA$8.47RF INDUSTRIES Interseries Adapter. SMA female to SMA male right angle adapter. Gold plated center pin and nickel body and teflon dielectric. Learn More
-
RF Industries - TNC/F - TNC/F Adapter$4.09RF INDUSTRIES TNC female to TNC female adapter. Learn More
-
CommScope - Universal Ground Bar$87.00COMMSCOPE 1/4" x 2-1/2" x 12-1/2" Universal Ground Bar. Made of solid copper with 33 pre-drilled holes. Ideal for all grounding app's incl towers & rooftops. Learn More
-
CommScope - Hanger Hardware Kit, 3/8", 3 Stack$29.79COMMSCOPE Click-On Hanger Hardware Kit for 1/2",5/8" or 7/8" coaxial cable. For use with 3 stack hanger in 3/8" size. Constructed of stainless steel. Learn More
-
RF Industries - UHF/F - BNC/F Adapter$5.27RF INDUSTRIES UHF Female to BNC female adapter. Learn More
-
CommScope - Click OnHangers LDF4-50A, 10 pack$27.17COMMSCOPE Click-On Hangers. For use with LDF4-50A 1/2" diameter cable. Package of 10. Recommended spacing every 3' up to 150 mph wind speed, 2'over 150 mph. Learn More
-
RF Industries - TNC/F - N/M Adapter$6.76RF INDUSTRIES TNC female to N male straight adapter, Learn More
-
RF Industries - SMA Male RP Crimp RG8U / 9913$8.14RF INDUSTRIES SMA male RP (reverse polarity) connector for RG8/U, 9913, LMR400. Learn More
-
CommScope - SSM - 7/8" SnapStak Stackable Hanger$27.36CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More
-
RF Industries - UHF Male Crimp-RG142$3.13RF INDUSTRIES UHF male connector for RG142. Nickle body, silver pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - MiniUHF Male Crimp-RG142/U$3.32RF INDUSTRIES Mini-UHF male connector for RG142/U. Nickel body silver center pin. Crimp: Center .068 Ferrule: .213 Learn More
-
RF Industries - BNC/M - SMA/M Adapter$7.37RF INDUSTRIES BNC male to SMA male straight adapter. Nickle plated body, gold plated contacts. Learn More
-
RF Industries - TNC Male Crimp-RG58,141$3.05RF INDUSTRIES TNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - UHF/F - BNC/M Adapter$5.20RF INDUSTRIES UHF female to BNC male adapter. Learn More
-
RF Industries - N Male/BNC Male Adapter$8.27RF INDUSTRIES N male to BNC male adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - MiniUHF Female Crimp RG8X$3.16RF INDUSTRIES Mini-UHF female connector for RG8X. Nickel plated body, silver pin, 3 piece construction, crimp style. Learn More
-
RF Industries - SMA/M/ - SMA/M Adapter$7.64RF INDUSTRIES SMA male to SMA male straight adapter. Gold plated body, gold plated contacts. Learn More
-
RF Industries - Mini-UHF Fem/Mini-UHF Fem$5.37RF INDUSTRIES Mini-UHF female to Mini-UHF female adapter. Learn More
-
RF Industries - N Female/UHF Female Adpt.$7.03RF INDUSTRIES N female to UHF female adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - UHF Male PL259-RG8,RG213$3.82RF INDUSTRIES UHF male connector for RG8, RG8A & RG213 cables. Silver plated shell, silver plated body. Teflon insulation. Solder pin and braid. Learn More
-
CommScope - CNT400PCoaxial Cable, White jack, Plenum$2.18The Andrew CNT400P braided coaxial cable (white jacket) is similar to RG8 but with lower loss and plenum-rated. This 50 Ohm coax cable has a 90 percent coverage braid shield for low loss. This plenum-rated transmission line offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization with LMR-400 connectors. The braided coax, plenum grade cable can be used in almost any application where handling characteristics, improved shielding and low loss is required. The Andrew WBC-400 plenum-rated, low loss coaxial cable with white jacket is available in bulk and is priced per foot. Learn More
-
RF Industries RFN-1006-49I - N MaleCrimp for LMR400, CNT400, 8214, 9913 cables$9.94RF Industries N male straight connector for 400 Series cable such as LMR-400, CNT-400, Belden 8214 and 9913. White Bronze body with gold crimp center pin. This is a solderless center conductor connector. Learn More
-
CommScope - SnapStak Hangers for 1/2" corrugated cable$25.90SnapStak Hangers for 1/2 in coaxial cable with quadruple stack capability and includes reinforcement bar. Learn More
-
-
-
RF Industries - N Male Crimp for LMR400, CNT400, 8214, 9913 cables$9.56RF Industries N male straight connector for 400 Series cable such as LMR-400, CNT-400, Belden 8214 and 9913. White Bronze body with gold crimp center pin. This is a solder pin connector. Learn More
-
CommScope - ANDREW Hanger Hardware Kit, 3/8",3 Stack$33.86ANDREW Click-On Hanger Hardware Kit for 1-1/4" or 1-5/8" coaxial cable. For use with 3 stack hanger in 3/8" size. Constructed of stainless steel. Learn More
-
CommScope - 1/2" Corrugated Coax Automated Prep Tool$269.67Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with LDF4-50A HELIAX 1/2 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More
-
CommScope Technologies LLC - 7/8" SnapStak Hanger, Includes Reinforcement Bar$31.37CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction. Quadruple stack capability, includes reinforcement bar. Learn More
-
CommScope Technologies LLC - ANDREW 10' FSJ4-50 Jumper, DIN Male/DIN Male$125.22ANDREW 10' SureFlex Jumper Consists of FSJ4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER with Sureguard weatherproofing. Learn More
-
CommScope - 1/2" Plenum Air Cable, Off White$3.79COMMSCOPE 1/2" Plenum Air 50 ohm cable. HL4RPV-50. Uses LDF4 connectors. Off White.*No automated prep tool available.MCPT-L4 is the prep tool that works. Learn More
-
RF Industries - Mobile Radio Adapter Kit$283.25RF INDUSTRIES interseries adapter kit. Contains 24 of the most popular adapters for the mobile radio professional. Incl. N,UHF & BNC adapters in soft zipper cas Learn More
-
CommScope - Universal Ground Bar$79.401/4" x 4" x 14" Universal Ground Bar. Made of solid copper with 30 pairs of universal 3/8" hole over 3/8" x 5/8" slot. Wall or tower mount. Learn More
-
CommScope - ANDREW Universal Ground Bar$54.08ANDREW 1/4" x 2" x 10" Universal Ground Bar. Made of solid copper with 10 pairs of universal 3/8" hole over 3/8" x 5/8" slot. Wall or tower mount. Andrew's Universal Ground Bar is competitively priced and offers the mounting flexibility so often needed at sites. This solid copper bar accommodates vertical and 90 degree mounting configurations and provides a central point to collect grounding leads. Learn More
-
RF Industries - UNIDAPT - Unidapt SMA Reverse Polarity Female Connector$6.76Reverse Polarity SMA Female Learn More
-
CommScope - 1-5/8" Air Cable$33.65The Commscope HELIAX Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacket. Learn More
-
RF Industries - 3' LMR195 Jumper N Male to TNC Male$33.23N MALE TO TNC MALE; LMR-195; WITH tessco WIRELESS SOLUTIONS LABEL Learn More
-
RF Industries - 4.3/10 Male To N Female Adapter, WB-S-T$29.22RF INDUSTRIES Adapter 4.3/10 Male To N Female, WB-S-T. Learn More
-
RF Industries - 7/16 DIN Female to 4.3-10 DIN Male$32.74RF INDUSTRIES PIM Adapter, 7/16 DIN Female to 4.3-10 DIN Male, -160dBc. Learn More
-
RF Industries - N/F - SMA/M Adapter$6.61RF INDUSTRIES N female to SMA male straight adapter. Nickel plated body, gold plated contacts. Learn More
-
RF Industries - Right Angle N/M RG142$10.22RF INDUSTRIES Right angle N male for RG142 cable. Silver body, gold pin. Learn More
-
RF Industries - N Male - N Male Adapter$9.27RF INDUSTRIES N male to N male straight adapter. Silver plated body, gold plated contacts. IP67 Rated. Learn More
-
RF Industries - TNC Male Crimp-RG58,141$3.25RF INDUSTRIES TNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - UG175 Reducer-RG58$1.47RF INDUSTRIES UG-175. Nickle plated reducer for use with nickle plated PL-259 connectors on RG58 cables. Pack of 25. Learn More
-
RF Industries - UHF/F - UHF/M Angle Adapt$7.83RF INDUSTRIES UHF female to UHF male right angle adapter. Learn More
-
RF Industries - UHF Female-RG8,RG213,214$6.37RF INDUSTRIES UHF female connector for RG8/U, RG8A/U and RG213 cables. Nickle plated body, silver plated contact. Solder center pin, clamp on braid. Learn More
-
RF Industries - BNC/M - BNC/F Angle Adapt$6.07RF INDUSTRIES BNC female to BNC male 90 degree angle adapter. Learn More
-
RF Industries - TNC/F - N/F Adapter$5.52RF INDUSTRIES TNC female to N female straight adapter. 1" long. Learn More
-
RF Industries - BNC/F - SMA/F Adapter$4.34RF INDUSTRIES BNC female to SMA female adapter. Use with UNIDEN and Johnson SMR radios. For use with Motorola cellular phones, use SKU# 34211. Learn More
-
RF Industries - BNC Female Bulkhead-RG58U$5.88RF INDUSTRIES BNC female bulkhead connector for RG58/U cable. Nickle plated body, gold plated center contact. Crimp style connector. Learn More
-
RF Industries - TNC/F - UHF/M Adapter$6.07RF INDUSTRIES TNC female to UHF male straight adapter. Learn More
-
CommScope - 138-150 MHz 6/9dB Exposed Dipole Omni Antenna$863.77Andrew DB224-E, 138 - 150 MHz omni exposed dipole antenna. This field adjustable VHF omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has 6 dBd gain and the offset has 9 dBd gain. The Andrew Solutions omni, exposed dipole antenna meets RoHS 202/95/EC. Learn More
-
RF Industries - TNC Male Rt. Angle/RG58/U$6.74RF INDUSTRIES TNC male right angle connector for RG58 . Nickle plated body, gold plated center pin, teflon dielectric. Crimp style. .213 ferrule, Learn More
-
RF Industries - Mini-UHF Female/ BNC Male$5.92RF INDUSTRIES Mini-UHF female to BNC male adapter. Learn More
-
RF Industries - Center Pin for RFN-1006-3I$1.29RF INDUSTRIES Center Pin N Male connector RFN-1006-3I used with 9913, LMR-400 and 241543,CUS TL93605 cables. Learn More
-
CommScope - SSM -SureGround Grounding Kit, (1/2")$18.99COMMSCOPE SureGround for 1/2" Al or Cu corrugated or smoothwall coaxial cable. Tinned copper clip with 48" #6 copper bond & field attached, 2 hole lug. Learn More
-
RF Industries - UHF Male PL259-RG8,RG213$3.02RF INDUSTRIES UHF male connector for RG8, RG8A & RG213 cables. Nickle plated shell, silver plated body. Phenolic insulation. Solder pin and braid. Learn More
-
CommScope - ANDREW 30'FSJ4-50B Jumper PDM/DM$181.37ANDREW 30' SureFlex Jumper. Consists of FSJ4-50B 1/2" superflexible cable with DIN Male on one end and Right Angle DIN Male on the other end. Learn More
-
CommScope - 7/8" RoundCushion 3 Hole$5.78COMMSCOPE stand. port cushion. For 7/8" corrugated cables. Three hole. Learn More
-
CommScope - ANDREW 12' LDF4-50 Low PIM Jumper DM - DM$41.12The Andrew L4A-DMDM-12-P SureFlex cable assembly process uses a 12 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 12 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
RF Industries - N Female/BNC Female Adpt.$7.55RF INDUSTRIES N female to BNC female adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - TNC Male Crimp-9913,LMR400$5.95RF INDUSTRIES TNC male connector for Belden 9913 and Times LMR400 cables. Nickel plated body, gold plated center pin. Solder center pin, Crimp on braid. Learn More
-
CommScope - ANDREW 15'FSJ4-50B Jumper PDM/DM$128.74ANDREW 15' SureFlex Jumper. Consists of FSJ4-50B 1/2" superflexible cable with DIN Male on one end and Right Angle DIN Male on the other end. Learn More
-
CommScope - 7/8" Grounding Kit Prep Tool$268.06ANDREW Aluminum Grounding Kit Preparation Tool for 7/8" corrugated cable SG series grounding kits Learn More
-
CommScope - SureGround Grounding Kit,1-1/4", 2 Hole Lug$22.63COMMSCOPE SureGround for 1-1/4" copper or aluminum, smooth or corrugated cable w/ 48" lead, unattached universal lug and weatherproofing. Learn More
-
RF Industries - N Male Crimp RG8/LMR400 Size$7.44RFI Hex/Knurl Combo N male for RG8 type. crimp pin, crimp ferule w/ heat shrink. Trimetal plated body, gold center pin. DOES NOT WORK WITH ULTRAFLEX CABLE Learn More
-
CommScope - 164-174 MHz 6/9dB Exposed Dipole Omni Antenna$855.28Andrew DB224-C covers the 164 - 174 MHz omni, exposed dipole antenna. This field adjustable VHF omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has a 6 dBd gain and the offset has 9 dBd gain. The Andrew Solutions omni, exposed dipole antenna meets RoHS 2002/95/EC. Learn More
-
RF Industries - SMA Male Crimp-RG174$3.09RF INDUSTRIES SMA male connector for RG174, 188, 188A and 316 cables. Learn More
-
RF Industries - BNC Male-9913,9914,LMR400$7.35RF INDUSTRIES BNC male connector for 9913, 9914 8214, 3315, LMR400 cables. Silver plated body with gold center pin. Solder center pin, clamp on braid. Learn More
-
RF Industries - N Male-RG8/RG213/RG214$6.43RF INDUSTRIES N male connector for RG8, RG213 cables. Nickle plated body, gold plated center pin. Solder pin, clamp on braid. Learn More
-
RF Industries - UHF/F - UHF/F Bulkhead$5.32RF INDUSTRIES UHF female to UHF female bulkhead adapter with hardware. Learn More
-
RF Industries - Crimp Frame & Die 3 Cavity: .100"/.128"/.429"$88.31RF Industries cable crimp tool kit includes die set with 0.100, 0.128, and 0.429 inch cavities. This crimping tool with die sets will crimp RG8, Belden 9913, Ultraflex and Andrew braided coaxial cables. The cable crimper kit is compatible with connector type N 50 Ohm. Dies are composed of a fine blanked, high carbon tool steel. The cable crimping tool frame features an ergonomic molded finger and palm grip for easy use. Learn More
-
RF Industries - UHF Female-RG58,141,$5.60RF INDUSTRIES UHF female connector for RG58 and 400 cables. Nickle plated body, silver plated center pin. Crimp center pin and ferrule. Learn More
-
RF Industries - SMA/F - TNC/M Adapter$6.03RF INDUSTRIES SMA Female/TNC Male straight adapter. Nickle plated body, gold plated contacts. Learn More
-
RF Industries - TNC Male Clamp-RG8X,LMR24$4.12RF INDUSTRIES TNC male connector for RG8X and Times LMR240 cables. Teflon dielectric. Nickle plated body, silver pin. Solder center pin, clamp on braid. Learn More
-
RF Industries - MiniUHF Quick Disconnect$3.09RF INDUSTRIES push-on crimp Mini-UHF male connector for RG58 cable. Quick disconnect feature is ideal for use with test equip. or transportable phones. Learn More
-
RF Industries - TNC/F - BNC/M Adapter$6.69RF INDUSTRIES TNC female to BNC male straight adapter. Learn More
-
RF Industries - Mini-UHF Male/ N Female$5.93RF INDUSTRIES Mini-UHF male to N female adapter. Learn More
-
RF Industries - BNC Male-Right Angle/RG58$6.70RF INDUSTRIES BNC male right angle connector for RG58/U and Ultralink cable. Nickel plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - N Female/BNC Male Adapter$7.69RF INDUSTRIES N female to BNC male adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - Mini-UHF Female/ TNC Male$5.79RF INDUSTRIES Mini-UHF female to TNC male adapter. Learn More
-
RF Industries - N Female Crimp-RG58/RG141$4.78RF INDUSTRIES N female connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Silver plated body, gold pin. .100 center pin can be crimped or solder Learn More
-
RF Industries - FME Male Crimp RG58/U$3.00RF INDUSTRIES FME male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickel plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - N Female Bulkhead for RG58$7.96RF INDUSTRIES Female crimp bulkhead w/ rear mount and O ring.connector for RG 58.Nickel body and gold center pin. Learn More
-
CommScope - U-Bolt for2-3/8" Pipe$3.45COMMSCOPE Galvanized U Bolt for 2-3/8" pipe. Size 3/8" diameter, 2-1/2" throat, 4" length, 2" thread. Comes with nuts and lock washers. Learn More
-
RF Industries - UHF Female for 1/2" LDF4-50A, LCF12-50J$33.92RFI UHF female Connector for LDF4-50A & LCF12-50J. Captivated silver center pin. White bronze plated brass body. Includes 2 o-rings and silicone tube. Learn More
-
CommScope - NODE A2/A4Outdoor Wall Mount$226.95The Andrew 7597821 indoor wall mounting kit is for both node A2 and node A4 chassis. Additional mounting kits are available for outdoor wall mounting and outdoor pole mounting. Learn More
-
RF Industries - TNC Female Crimp-RG58$3.68RF INDUSTRIES TNC female connector for RG58/U, 58A/U, 58C, 141, 141A and Ultralink cables. Learn More
-
CommScope - 7/8" RoundCushion 1 Hole$5.78COMMSCOPE stand. port cushion. For 7/8" corrugated cables. One hole. Learn More
-
CommScope - 1/2" RoundCushion 2 Hole$5.78COMMSCOPE stand. port cushion. For 1/2" corrugated cables. Two hole. Learn More
-
CommScope - 1-1/4" Hanger Grommet for 5/8" Cable, 10 Pack$36.03COMMSCOPE 1-1/4" Hanger Grommet for 5/8" Cable, 10 Pack For use 1-1/4" snap-in hangers, clip style hangers, or standard hanger kits. Learn More
-
RF Industries - 7/16 DIN Female to N Female barrell adapter$40.317-16 DIN adapters are highly desired in test applications such as base station PIM testing. These low loss, low VSWR adapters are designed to be used with portable antenna and cable analyzers. Learn More
-
RF Industries - Mini UHF/M - TNC/F Adapt$5.05RF INDUSTRIES Mini-UHF male to TNC female straight adapter. Learn More
-
RF Industries - SMA/F-N/F Adapter$6.95RF INDUSTRIES SMA Female to N Female Straight Adapter. Nickel plated body, gold plated pin, teflon dielectric. Learn More
-
CommScope - 450-470 MHz 9.2dBd Exposed Dipole Omni Antenna$1,984.35Andrew DB420-B omnidirectional, exposed dipole antenna operates in the 450 - 470 MHz frequency range. This UHF omni dipole antenna is 9.2 dBd gain, can handle up to 250 watts and is terminated with an N male connector at the end of a flexible lead. Included wit the antenna is a DB356-OS pipe mount lit for 1.25 - 3.5 inch OD round members. Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations and is extremely rugged. This antenna meets RoHS 2002/95/EC.
Additional shipping charges may apply- ships freight only. Learn More -
RF Industries - RF adapter kit$193.63RF INDUSTRIES interseries adapter kit. 30 piece combination of male and female BNC, TNC, N, SMA, UHF and mini-UHF connectors. White bronze plating. Learn More
-
RF Industries - UHF Male Push-on RG58$3.21RF INDUSTRIES UHF male connector for RG58, 141 and 400 cables. Features push- on ferrule. No installation tools req. Nickle plated body, silver plated pin. Learn More
-
RF Industries - UHF Male Crimp-RG58,2Nut$2.80RF Industries UHF male crimp connector RG58 & LMR200 cable. Double nut coupling provides a deeper shell for recessed SO/239 UHF female connectors. Learn More
-
RF Industries - N/F-N/M Right Angle Adpt.$12.98RF INDUSTRIES N female to N male right angle adapter. Silver plated body, gold contacts. Dielectric is Teflon PTFE/TPX. Learn More
-
RF Industries - RF INDUSTRIES MCX Male Straight crimp plug$3.98RF INDUSTRIES MCX Male Straight crimp plug for RG174/U and RG316U Learn More
-
RF Industries - RCA/M - BNC/F Adapter$3.87RF INDUSTRIES BNC female to RCA male adapter. Nickle plated body, silver plated contacts. Learn More
-
RF Industries - TNC/F - FME/F Adapter$6.47RF INDUSTRIES TNC female to FME female adapter. Learn More
-
RF Industries - UHF Male Crimp-RG58,RG141,LMR200$3.41RF INDUSTRIES UHF male connector for RG58/U, RG58A/U, RG141 and LMR-200 cable. All surfaces are silver plated. Crimp center pin, crimp on braid. Learn More
-
RF Industries - 43 Pc. RF Adapter Kit$346.89RF INDUSTRIES interseries adapter kit. 43 piece combination of male and female BNC, TNC, N, SMA, UHF, mini-UHF, RCA & F connectors in a padded plastic case. Learn More
-
RF Industries - UNIVERSAL Crimp Tool Frame Only$59.32RF Industries universal cable crimp tool frame is compatible with RFA4005 and RFA4006 dies. This replacement crimp handle is ergonomically designed. The universal die frames are easily changed using either a Phillips or Standard screwdriver. Learn More
-
CommScope - 806-869 MHz 10dB 7 Element Yagi Antenna$384.28Andrew DB499-A is a heavy duty yagi antenna operating in the 806 - 869 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More
-
RF Industries - UNIDAPT - Unidapt Signal Sampler$59.81RF INDUSTRIES variable RF signal sampler An adjustable BNC female port allows a 20-80dB attenuated signal up to 3 GHz to be taped off. N male to N female in/out Learn More
-
RF Industries - N Male Crimp-9913/LMR400$129.73RF INDUSTRIES N male connector for 9913, Lmr400, AND 241543, CUS TL93605. Silver plated body, gold center pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - TNC Male Crimp-PROFLEX$3.27RF INDUSTRIES TNC male connector for Proflex, Times AA3096 and equivalent cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - Right Angle N/M RG58$9.47RF INDUSTRIES Right angle N male crimp connector for RG58 cable. Silver plated body, gold pin. Learn More
-
RF Industries - TNC Female Crimp-8X,LMR24$4.66RF INDUSTRIES TNC female connector for RG8X and Times LMR-240 cables. Nickle plated body, gold plated center pin. Crimp pin and crimp body. Learn More
-
RF Industries - N Male Crimp-RG8/RG213$5.85RF INDUSTRIES N male connector for RG8U, RG8A/U and RG213 cables. Silver plated body, gold center pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - N/F - N/F Bulkhead Recept$8.93RF INDUSTRIES double N female bulkhead receptacle. Silver plated. Mounts in 11/16" hole. Learn More
-
RF Industries - TNC Male Clamp-RG58$3.98RF INDUSTRIES TNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, Silver pin. Solder center pin, clamp on braid. Learn More
-
RF Industries - Mini-UHF/M - Mini-UHF/M Rt. Angle Adpt.$6.61RF INDUSTRIES Mini-UHF female to Mini-UHF male right angle adapter. Square body. Learn More
-
RF Industries - SMA/M - UHF/F Adapter$8.36RF INDUSTRIES SMA male to UHF female straight adapter. Nickel plated body, gold plated contacts. Learn More
-
RF Industries - N Female/N Female Adapter$7.44RF INDUSTRIES N female to N female adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - BNC Male-RG58,RG141$3.61RF INDUSTRIES BNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickel plated body, gold pin. Solder center pin, clamp on braid. Learn More
-
RF Industries - UHF/F - UHF/F Adapter$3.69RF INDUSTRIES UHF female to UHF female barrel straight adapter. Learn More
-
RF Industries - MiniUHF Female Crimp-RG58$3.28RF INDUSTRIES Mini-UHF female connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, silver pin. 3 piece construction, crimp style. Learn More
-
RF Industries - BNC Male Crimp-RG8X,LMR24$3.19RF INDUSTRIES BNC male connector for RG8/X, Belden 9258 and Times LMR-240. cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - BNC Male Crimp-RG174$3.20RF INDUSTRIES BNC male connector for RG174, (large ferrule), nickle plated body, gold center pin, crimp on center pin, crimp on braid. Learn More
-
RF Industries - UHF/F - TNC/M Adapter$6.08RF INDUSTRIES UHF female to TNC male adapter. Learn More
-
CommScope - 450-470 MHz 9dB Exposed Dipole Omni Antenna$622.32Andrew DB411-B quasi omnidirectional, exposed dipole antenna operates in the 450 - 470 MHz frequency range. The 9 dB gain antenna can handle up to 250 watts. This UHF dipole antenna is terminated with an N male connector at the end of a flexible lead. Included with the antenna is a DB365-OS pipe mounting kit for 1.25 - 3.5 inch OD round members. The Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations. The DB411 is extremely rugged and is moisture resistant. The antenna meets RoHS 2002/95/EC. Learn More
-
RF Industries - N Male Crimp-RG58/RG141$5.08RF INDUSTRIES N male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickel plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - BNC/M - SMA/F Adapter$6.07RF INDUSTRIES BNC male to SMA female straight adapter. Brass body, Gold plated contacts. Learn More
-
RF Industries - RG-8, 11, 213, 214/U, 9913, 9914 Adj. Strip tool$58.45RF Industries coaxial cable stripper has an adjustable blade for larger coax and telephone cables. This zinc diecast strip tool is designed to prep a variety of coaxial cables including RG 8, RG 11, RG 213, RG 214/U, 9913, and 9914. RF Industries coax stripper prevents cable distortion. Learn More
-
RF Industries - N Male Crimp-RG58/RG141$5.07RF INDUSTRIES N male connector for RG58/U, RG58A/U, RG141, RG58 Ultralink. cable. Silver plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - SMA/F - N/M adapter$8.86RF INDUSTRIES SMA Female/N Male straight adapter. Nickle plated body, gold plated contacts. Learn More
-
RF Industries - TNC Male Crimp-RG8X,LMR24$3.53RF INDUSTRIES TNC male connector for RG8X and Times LMR240 cables. Delrin dielectric. Nickle plated body, gold pin. Crimp center pin, crimp-on braid. Learn More
-
RF Industries - TNC Male Crimp-RG58,Black$3.27RF INDUSTRIES TNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. Crimp style . Black chrome finish. Learn More
-
RF Industries - N Female-RG8X,LMR240$8.17RF INDUSTRIES N female connector for RG8/X, Belden 9258, Micro 8/U, Remee 1600 and Times LMR-240 coaxial cables. Clamp/solder. Silver body, gold pin. Learn More
-
RF Industries - BNC/F - UHF/M Adapter$6.36RF INDUSTRIES BNC female to UHF male straight adapter. Learn More
-
RF Industries - MiniUHF Male Crimp-RG8X$3.43RF INDUSTRIES Mini-UHF male connector for RG8X. Nickel plated body, silver pin, 3 piece construction, crimp style. Learn More
-
CommScope - ANDREW 15' LDF4-50 Low PIM Jumper DM - DM$42.55The Andrew L4A-DMDM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
RF Industries - UHF Male Crimp-RG8,RG213$3.87RF INDUSTRIES UHF male connector for RG8, RG8A & RG213 cables. Silver plated shell, silver plated body. Teflon insulation. Crimp pin and braid. Learn More
-
CommScope - 1/2" Grounding Kit Prep Tool, Aluminum$260.32ANDREW 1/2" Aluminum Ground Kit Strip Tool for LDF4-50 foam cable. Manually operated for SG Series. Learn More
-
RF Industries - BNC/F - BNC/F Adapter$3.27RF INDUSTRIES BNC female to BNC female straight adapter. Learn More
-
CommScope - ANDREW 3' LDF4-50 Low PIM Jumper NM - NM$75.33The Andrew L4A-NMNM-3-P SureFlex cable assembly process uses a 3 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 3 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
CommScope - ANDREW 20' LDF4-50 Jumper, DIN Male/DIN Male$50.49ANDREW 20' SureFlex Jumper Consists of LDF4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER. Learn More
-
CommScope - ANDREW 30'LDF4-50 Low PIM Jumper DM - DM$62.20The Andrew L4A-DMDM-30-P SureFlex cable assembly process uses a 30 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 30 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
RF Industries - Crimp Tool Kit Crimps .042 to .429$414.28RF INDUSTRIES crimping tool kit. Includecrimp handle & 10 sets of dies. Phillip screwdriver is all you need to change dies. Crimps hex .042 to .429" Learn More
-
CommScope - 1/2" Automated Prep Tool$269.60COMMSCOPE EASIAX Plus Automated Cable Preparation Tool for 1/2" coaxial cable. Learn More
-
57 VDC rectifier module for the ION-E system$1,416.2557 VDC rectifier module for the ION-E system Learn More
-
Manual Cable Preparation Tool for 7/8 in coaxial$161.47Manual Cable Preparation Tool for 7/8 in coaxial Learn More
-
Copper Ground Buss Bar, 1/4 in x 4 in x 24 in$213.71Copper Ground Buss Bar, 1/4 in x 4 in x 24 in Learn More
-
-
-
-
-
COMMSCOPE Hoist Grip 1-1/4 LDF6-50 Heliax Cable"$39.63COMMSCOPE Hoist Grip 1-1/4 LDF6-50 Heliax Cable" Learn More
-
2RU Fiber Patch Panel with Removable Lid$454.342RU Fiber Patch Panel with Removable Lid Learn More
-
-
30' LDF4-50A Jumper 7/16 DIN(M) - 7/16 DIN(M) R/A$74.9530' LDF4-50A Jumper 7/16 DIN(M) - 7/16 DIN(M) R/A Learn More
-
-
-
-
-
-
-
-
-
-
Low PIM N Male to QMA Female Interseries Adapter$13.18Low PIM N Male to QMA Female Interseries Adapter Learn More
-
UAP, 10G, Expansion Port, Integrated Antenna$2,565.28UAP, 10G, Expansion Port, Integrated Antenna Learn More
-
CommScope - 1/2" Fire-retardant Radiating Cable$4.91COMMSCOPE 1/2" radiating mode cable with fire -retardant, halogen free polyolefin jacket. Learn More
-
-
-
6' D-CLASS LDF4-50 4.3-10 Male to 4.3-10 Male$52.786' D-CLASS LDF4-50 4.3-10 Male to 4.3-10 Male Learn More
-
-
-
-
GigaSPEED Modular Patch Cord, Blue Jacket, 2M$26.80GigaSPEED Modular Patch Cord, Blue Jacket, 2M Learn More
-
-
15' Hybrid Fiber Tails SM 1 x 1, 2 Fiber-6-OVP Box$163.6515' Hybrid Fiber Tails SM 1 x 1, 2 Fiber-6-OVP Box Learn More
-
-
ANDREW 30' LDF4-50, DIN Male/DIN Male, Sureguard$77.00ANDREW 30' LDF4-50, DIN Male/DIN Male, Sureguard Learn More
-
RF Industries - MiniUHF Male Crimp-RG58$2.09RF INDUSTRIES Mini-UHF male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. AMP style, pin in body. Learn More