Pro Telecom Supply is a leading supplier of Commercial and Industrial Communications products. We carry the parts and equipment you need to complete your project on time and affordably. Our partnerships with the leading vendors in telecommunications gives you access to some of the worlds best technology products. Whether you are completing an RF project, or need components for your mobile workforce, Pro Telecom Supply has you covered.
All Products
-
PCTEL - 0-1000 MHz Mini Mag, RG58/U, Mini UHF (loose)$28.23The PCTEL Maxrad BGMPL mini magnetic mount is a Motorola-style, NMO mobile antenna mount that offers removability and a smaller magnet diameter. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust. The vehicle antenna mount thread size is 1-1/8 inch - 18, and the magnetic base is 2 3/8 inch. The magnetic base features 60 pounds of pull strength eliminating the fear of disconnect.This PCTEL black vehicle mini-magnet mount for mobile antennas operates within 0 - 1000 MHz and includes 12 feet RG58/U cable. Mini UHF connector is included but not installed. Learn More
-
RF Industries - N Female Bulkhead/RG142$8.12RF INDUSTRIES Female crimp bulkhead w/ rear mount and O ring connector for RG142.Nickel body and gold center pin. Learn More
-
RF Industries - Mini UHF/M - BNC/F Adapt$4.52RF INDUSTRIES Mini-UHF male to BNC female straight adapter. Learn More
-
RF Industries - TNC/F - BNC/F Adapter$6.15RF INDUSTRIES TNC female to BNC female adapter. Learn More
-
PCTEL - 144-174 MHz 5/8 Wave Antenna, Chrome Coil$40.24The PCTEL MHB5800S base-loaded 5/8 wave antenna with spring operates within the VHF frequency range, 144-174 MHz. This VHF mobile antenna delivers high performance, with a gain of 3 dB. Maximum power input is 200 watts. This 58 inch whip antenna utilizes a chrome coil design with the enhancements of a heavy-duty tapered rod for maximum durability in tough environments. Order NMO mount separately. Learn More
-
RF Industries - BNC/F Tee Adaptor$6.69RF INDUSTRIES BNC female 3-way Tee adapter. Nickle plated body, silver contacts, Teflon insulated. Learn More
-
RF Industries - BNC/M - BNC/M Adapter$5.12RF INDUSTRIES BNC male to BNC male straight adapter. Nickle plated body, silver plated contacts. Learn More
-
PCTEL - 890-960 9dB 5 Element Yagi Antenna$130.24PCTEL BMOY8905 black yagi antenna has been optimized to achieve superior performance over the entire 900 MHz and UHF frequency bands. This 890 - 960 MHz directional yagi serves as a non-cellular directional base station. The 5-element antenna provides 9.0 dBd gain and has a maximum power input of 150 watts. The BMOY8903 is terminated with an N Female connector and is supplied with the MYK17 mast mount bracket. Maximum mounting pipe diameter is 1.9 inch OD pipe.Seamless aluminum construction, 360 degree welds, and a powder-coated finish give this yagi antenna superior durability and outstanding performance in all weather conditions. Learn More
-
RF Industries - TNC/F - SMA/M Adapter$6.29RF INDUSTRIES TNC female to SMA male straight adapter. Learn More
-
RF Industries - SMA/M - BNC/F Adapter$5.70RF INDUSTRIES SMA male to BNC female straight adapter. Nickle plated body, gold plated contacts. Learn More
-
RF Industries - BNC Male Crimp-RG58,RG141$2.98RF INDUSTRIES BNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
PCTEL - 806-866 MHz 9dB 6 Element Yagi Antenna$72.15PCTEL MYA8066 aluminum yagi antenna operates in the 806 - 866 MHz frequency range. This 800 MHz yagi antenna is unsurpassed in it's price to performance ratio. The MYA8066 is a 6-element, 11 dBi gain yagi features rugged 6060-T6 aluminum construction, stainless steel hardware, and through-boom mounting of all elements -- providing years of reliable service. Elements are DC grounded to the boom. Maximum power input is 150 watts and is terminated with an N Female connector. Mounting hardware is included. Learn More
-
RF Industries - SMA/M - Mini-UHF/F Adapter$6.22RF INDUSTRIES SMA male to Mini UHF femal straight adapter. Nickle plated body, gold plated contacts. Learn More
-
RF Industries - TNC Male Crimp-LMR-200$3.06RF INDUSTRIES TNC male connector for LMR-200. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - SMA Male Rt Angle/ RG8X$7.54RF INDUSTRIES SMA male right angle conn. RG8X, RG30, LMR240 cables. Learn More
-
RF Industries - BNC/F - TNC/M Adapter$5.27RF INDUSTRIES BNC female to TNC male straight adapter. Learn More
-
RF Industries - N Female/UHF Male Adapter$7.91RF INDUSTRIES N female to UHF male adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - Mini-UHF Female/ N Male$6.91RF INDUSTRIES Mini-UHF female to N male adapter. Learn More
-
RF Industries - N Female "T" Adapter$11.23RF INDUSTRIES N female "T" adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - D/F-N/F Barrell Adapter$41.10RF INDUSTRIES 7/16 DIN Female to N Female Low-PIM barrell adapter. Silver Plating contact and body. Learn More
-
PCTEL - 118-940 MHz 1/4 wave, black$18.04MAXRAD 118-940 MHz 1/4 wave antenna. 250 continuous watt heavy duty 5/16 thread stub contact assembly. Black chrome. Mates with TAD/TAE,NMO,KD series mount. Learn More
-
PCTEL - 450-470 MHz 7.1dB 3 Element Yagi Antenna$64.93MAXRAD 450-470 MHz directional yagi antenna. 3 element, 7.1dB gain, 300 watt Direct N female termination. Includes mounting hardware. Learn More
-
RF Industries - SMA Male/ Right Angle$5.38RF INDUSTRIES SMA male right angle for RG58/U, 58A/U, 58C, 141, 141A, 142, 142A, 223, 400 and Ultralink cable. Learn More
-
RF Industries - BNC Male Crimp-RG58,RG141$3.02RF INDUSTRIES BNC male connector for RG58, RG58A/U, RG141 & Ultralink mobile cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
PCTEL Maxrad - 698-2700MHz LTE Low Profile Antenna, No Mount$38.67PCTEL MAXRAD 698-2700 MHz broad band LTE low profile vertical antenna. 3 dBi avg gain. MLF high efficiency mount sold separately. 2.4ǃ_ x 1.5ǃ_ OD Learn More
-
RF Industries - BNC Male-RG8, 8A & 213$6.59RF INDUSTRIES BNC male connector for RG8, RG8A & RG213 cables. UG-959A/U. Nickle plated body with gold solder (.100) center pin, clamp on braid. Learn More
-
RF Industries - SMA Male Crimp-RG-8X$3.68RF INDUSTRIES SMA male connector for RG8X, RG30, LMR240 cables. Solder Center Pin. Learn More
-
RF Industries - N Male/UHF Female Adapter$7.95RF INDUSTRIES N male to UHF female adapter. Silver plated body, gold plated contacts. Learn More
-
PCTEL - MAXRAD MFB Series Antenna Mount Aluminum Base$19.99The PCTEL Maxrad MMK9 base station antenna mount will secure a 1 5/16 inch outer diameter antenna to a 2 1/2 inch maximum outer diameter mast. This antenna mounting bracket is designed for Maxrad MFB series antennas with an aluminum based housing. Learn More
-
RF Industries - BNC/F - BNC/F Bulkhead$5.10RF INDUSTRIES BNC female to BNC female bulkhead adapter with O-ring. Nickle plated body, gold plated contacts. Learn More
-
PCTEL - 450-470 MHz 9.2dB 5 Element Yagi Antenna$75.42MAXRAD 450-470 MHz directional yagi antenna. 5 elem., 9.2dB gain, 300 watt. Direct UHF female termination. Includes mounting hardware. Learn More
-
RF Industries - Mini-UHF/F - FME/M Adapter$3.46RF INDUSTRIES Mini-UHF female to FME male (Euro Nipple) adapter. Learn More
-
RF Industries - SMA/F-SMA/M Adapter-RA$9.65RF INDUSTRIES Interseries Adapter. SMA female to SMA male right angle adapter. Gold plated center pin and body. Teflon dielectric. Learn More
-
RF Industries - TNC Male Clamp-9913,LMR40$8.12RF INDUSTRIES TNC male connector for Belden 9913 and Times LMR400 cables. Silver plated body, gold plated center p pin. Solder center pin, clamp on braid. Learn More
-
PCTEL Maxrad - Wi-Sys -GPS Permanent Mount Ant, TNC(F), White$101.30MAXRAD 40dB 3-5V low noise, high gain permanent mount GPS antenna. Features high out-of-band rejection and weather proof white cone-shaped housing with TNC(F) Learn More
-
PCTEL - Shock Spring for Low/High Band/3dB and UHF 5dB$59.61MAXRAD shock spring for low band, high band/3dB and UHF 5dB antenna models. Not for use with MAX base antennas. Learn More
-
PCTEL - 144-174 MHz 5/8 Wave Antenna, Chrome Coil$30.54The PCTEL MHB5800 5/8 wave antenna operates within the VHF frequency range, 144-174 MHz. This VHF mobile antenna is field-tunable and features a 3 dB gain with or without a ground plane. Maximum power input is 200 watts. The 58 inch whip antenna utilizes a chrome coil design with the enhancements of a heavy-duty tapered rod for maximum durability in harsh environments. The two-way antenna is able to maintain desired resonant frequency through heavy shock vibrations. The PCTEL heavy-duty whip-style antenna is designed for mobile two-way communication within the 144-174 MHz VHF frequency band.Order Motorola style mount separately. Learn More
-
PCTEL - 3/4" Mount, 25' RG58/U Mini-UHF loose$17.42MAXRAD brass permanent body mount for a 3/4" hole. Includes 25' RG58/U and loose mini-UHF connector. Formerly Part NMO58U//PL. Learn More
-
PCTEL - 0-3 GHz,Mag Mount,Proflex Plus 195,TNC-M,installed$37.13The PCTEL Maxrad GMLFML195C magnetic mount is a Motorola-style, NMO mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18, and the magnetic base is 3 1/4 inches. The magnetic base has a rubber boot to prevent damage to your vehicle. This NMO mount includes 12 feet of Proflex Plus 195 low loss coax cable. A TNC male connector is installed.The PCTEL black vehicle magnet mount is designed for use with Motorola-style mobile antennas of a higher frequency (0 - 3000 MHz). Learn More
-
RF Industries - SMA/ - SMA/F Adapter$4.64RF INDUSTRIES SMA female to SMA female straight adapter. Nickle plated body, gold plated contacts. Learn More
-
RF Industries - N Male RG8X/LMR240 Size$10.66RFI Hex/Knurl Combo N male for RG8X/240 Captivated center pin, crimp ferule. Silver plated body, gold center pin. Learn More
-
PCTEL - 380-520MHz 2dB Wideband Antenna, Unity, Black$54.43MAXRAD 380-520MHz wideband 2dB with ground plane / unity gain without black antenna with stainless steel spring. 200 watts. Order Motorola style mount separately. Learn More
-
RF Industries - Strip Tool, LMR400, RG214, N Male$62.51RF Industries cable stripper easily cuts jacket, braid and dielectric in one step. This strip tool quickly prepares LMR 400 type cables. The coax three-level stripper preps a wide variety of popular cables including LMR 400, RG 214, RG 8, RG 213, Belden 9913, and Cushcraft 93605. RF Industries coax stripper is designed to prevent over-penetration and cable distortion. Strip lengths are manufactured to industry standards. Learn More
-
RF Industries - BNC/F - SMA/F Adapter$4.72RF INDUSTRIES BNC female to SMA female adapter. Use with Motorola cellular phones. For use with OKI 900 cellular phones, use sku# 72604. Learn More
-
PCTEL - 890-960 MHz 10 dBd 7 Element Yagi Antenna$116.29PCTEL BGYD890K yagi antenna is engineered to provide high gain broadband performance between the frequencies of 890 - 960 MHz. Directional antenna features aluminum elements and a fully welded dipole on the boom. This yagi antenna is a 7-element black powder coated over stainless steel antenna assembly. The maximum power input is 200 watts. The antenna has a low loss 2 foot RG213 feed with an N Female connector. A high-strength mounting clamp is supplied for vertical or horizontal polarization. Learn More
-
PCTEL - 890-960 MHz 14dBd 18 Element Yagi Antenna$334.75PCTEL BLUEWAVE 890-960 MHz 14 dBd gain yagi antenna. 18 elements, 200 watts. N Female connector on 2 ft. pigtail. Includes mounting hardware BWC1001. Learn More
-
RF Industries - UHF Male for 1/2" LDF4-50A, LCF12-50J$34.48RFI UHF Male Connector for LDF4-50A & LCF12-50J. Captivated silver center pin. White bronze plated brass body. Includes 2 o-rings and silicone tube. Learn More
-
PCTEL - Magnet Mount, 12' RG58/U, FME female$27.91MAXRAD magnet mount with 12' RG-58/U and attached FME female connector. Learn More
-
-
PCTEL - Thick Roof Mount, No Connector, Low Profile$40.37PCTEL 3/8" or 3/4" diameter low profile thick roof mount for up to 1/2" deep. Accepts low profile and MOSAIC antennas. Has 30' RG58/U cable. NO connector Learn More
-
PCTEL - 1575 MHz 3.5 dBic Timing Antenna, 26dB Amplifier$211.14The PCTEL GPS-TMG-HR-26 timing reference antenna features a 26 dB amplifier and narrow band high rejection filtering specifically designed to support long-lasting, trouble-free deployments in congested cell-site applications with severe interference around the GPS L1 frequency. The proprietary quadrifiliar helix design, coupled with multi-stage filtering provides superior out-of-band rejection and lower elevation pattern performance than traditional patch antennas. The unique radome shape sheds water and ice, while eliminating problems associated with bird perching. Learn More
-
RF Industries - SMA Female Crimp-RG174$4.81RF INDUSTRIES SMA female connector for RG174, RG188, RG316 cables. Nickel plated body, gold plated pin, teflon dielectric. Crimp attachment. Learn More
-
PCTEL - 0-1000 MHz, 3/4" Brass Mount, RG-58/U, FME$16.04The PCTEL Maxrad NMO58UFFME vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U coax cable and an installed FME female connector. Thread size is 1 1/8 inch - 18. Learn More
-
PCTEL - 0-960 MHz, 3/4" Hole Mt only, brass$6.33The PCTEL Maxrad NMO34 vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount requires you to purchase cable and connectors separately. Thread size is 1 1/8 inch - 18. Learn More
-
RF Industries - TNC Male Crimp-RG142,RG55$3.82RF INDUSTRIES TNC male connector for RG142/U & RG55/U. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Delrin Dialectric. Learn More
-
PCTEL - 0-1000 MHz, 3/4" Brass Mount/ No Conn$13.84The PCTEL Maxrad NMO58U-NC vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U cable. No connector is included. Thread size is 1 1/8 inch - 18. Learn More
-
RF Industries - UHF Male Crimp-RG8X,LMR24$3.43RF INDUSTRIES UHF male connector for RG8X and Times LMR-240 cables. Nickle plated body, silver plated pin. Crimp center pin, crimp on braid. Learn More
-
PCTEL - 3/4" Mount, 25' RG58/U Mini-UHF installed$17.42MAXRAD brass permanent body mount for a 3/4" hole. Includes 25' RG58/U and installed mini-UHF connector. Learn More
-
RF Industries - Crimp Tool Kit: 2 Universal Frames & 2 Die sets$248.05RF Industries cable crimp tool kit allows you to terminate most coaxial and datacom connectors for RG58, RG59, Proflex, RG8, and RG214 among other cables. The crimp tool kit includes two cable crimper along with two die set. Die set one crimps to the following sizes: square 0.052 inch and hex 0.068, 0.100, 0.213, and 0.255 inches. Die set two crimps to the following sizes: hex 0.100, 0.128, and 0.429 inches. The ergonomically-designed crimping tool will last over 50,000 crimp cycles. A handy chart inside the lid indicates which interchangeable die is correct for the particular cable youre working with. Dies are precision die cast to provide long field service use and are easily changed. Learn More
-
RF Industries - SMA Male Crimp-RG58,RG141$2.87RF INDUSTRIES SMA male connector for RG58/U, 58A/U, 58C, 141, 141A, 400 and Ultralink cable. Also RG55, 142 & 223 w/SKU 63972 ferrule. Solder center pin. Learn More
-
PCTEL Maxrad - BrassNut with "O"ring for 3/8" Hole Mount$65.67MAXRAD brass nut and "O" ring for 3/8" mount. 20 pack. Learn More
-
-
PCTEL - 450-470 MHz 10.2dB 6 Element Yagi Antenna$88.55MAXRAD 450-470 MHz directional yagi antenna. 6 elem., 10.2dB gain, 300 watt. N-female termination.Includes mounting hardware Learn More
-
RF Industries - UNIDAPT - Unidapt "T" Adapter$15.67RF INDUSTRIES unidapt "T" adapter. Use with any unidapt section to make the "T" connection you need. Learn More
-
PCTEL - 1575 MHz 3.5 dBic Timing Antenna, 40dB Amplifier$253.53PCTEL 1575 MHz GPS Reference Timing Antenna. 3.5 dBic, N Female connector. Incorporates a 40 dB low noise amplifier with enhanced filtering. Red Collar Mt incl Learn More
-
PCTEL - 3/4" mount, 0-3 GHz, SMA Male$23.62PCTEL MAXRAD 0-3 GHz 3/4" hole antenna mount. Includes 17' Pro-Flex Plus 195 low loss coaxial cable and SMA male connector (installed). Learn More
-
PCTEL - 430-470 MHz 7dBi Fiberglass Omni Antenna$614.02PCTEL BOA4357 is a heavy-duty omnidirectional fiberglass base station antenna with a gain of 7 dBi / 5 dBd. The frequency range is 430 - 470 MHz. This UHF omni antenna has a power input of 250 watts, is DC grounded and terminated with an N female bulkhead connector. The antenna has a removable drain plug to allow for inverting. BWC1005 mounting hardware is included.This UHF antenna has a linear array enclosed in a heavy-duty UV treated light gray fiberglass radome with a thick walled aluminum mounting base to achieve reliable long term use. This durable omni antenna is designed to withstand harsh environments. The BOA omnidirectional base station antenna is ideal for industrial wireless and SCADA applications. Learn More
-
PCTEL - 1575 MHz 3.5 dBic Timing Antenna, 26dB Amplifier$147.17PCTEL 1575 MHz GPS Reference Timing antenna 3.5 dBic, N Female connector. Integrates a 26 dB low noise amplifier with enhanced filtering. Red Collar Mt & 2' pipe inc Learn More
-
PCTEL - 1575 MHz 3.5 dBic Timing Antenna, 26dB Amplifier$232.41PCTEL 1575 MHz GPS Reference Timing Antenna. 3.5 dBic, N Female connector. Incorporates a 26 dB low noise amplifier with enhanced filtering. Red Collar Mt incl Learn More
-
RF Industries - N Male-RG8X,LMR240$8.20RF INDUSTRIES N male connector for RG8X and Times LMR 240 cables. Silver plated body, gold pin. Solder pin, clamp on braid. Learn More
-
PCTEL Maxrad - 136-1741/4 Wave Antenna w/ Spring, Black$68.71MAXRAD 136-174 MHz, 160 watt, quarter wave antenna with spring. No tuning required. Order desired Motorola type mount separately. Black. Learn More
-
PCTEL - 0-960 MHz, 3/4" Brass Mt, UHF/M$16.04The PCTEL Maxrad NMO58AUSP vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58A/U coax cable and an UHF male (PL259) connector. Thread size is 1 1/8 inch - 18. Learn More
-
PCTEL - 0-960 MHz, 3/4" Mount, Mini-UHF$14.80The PCTEL Maxrad NMO58UPL vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U cable and a mini UHF connector. Thread size is 1 1/8 inch - 18. Learn More
-
PCTEL - Trunk Groove Mount, RG58/U, No Connector$22.84MAXRAD weatherproof trunk/hood groove bracket mount. Cable exits at 45 degree angle. Includes 17' RG58/U cable with no connector. Learn More
-
PCTEL Maxrad - 806-896MHz 10dBd 7 Element Yagi Antenna$204.58PCTEL BMYD806K series yagi antenna is designed to provide characteristics of a high gain, broadband, premium-quality antenna. The yagi antenna operates in the frequency range 806 - 896 MHz and has a gain of 10 dBd. This 7-element antenna is supplied with a 2 foot RG213 pigtail with an N Female connector. The antenna is anodized for corrosion resistance and has a maximum power input of 200 watts. Includes mounting hardware BWC1001. PCTEL DMYD806K is heavy duty designed with harsh conditions in mind. Learn More
-
RF Industries - UNIDAPT - Unidapt 7/16 DIN Female Connector$31.42RF INDUSTRIES 7/16 DIN female unidapt connector. Use with female barrel to create inter-series adapters. Learn More
-
PCTEL - 150-174MHz 9.2dB 5 Element Yagi Antenna$141.10MAXRAD 150-174 MHz 5 element VHF yagi. Field tunable. 9.2dB gain, 300 watt. Direct N Female termination. Includes mounting hardware. Learn More
-
PCTEL - 150-174MHz 7.1dB 3 Element Yagi Antenna$98.46MAXRAD 150-174 MHz 3 element yagi. Field tuneable. 7.1dB gain, 300 watt. Direct N female termination. includes mounting hardware. Learn More
-
RF Industries - BNC Male, RG6, 75 ohm$3.10RF INDUSTRIES 75 Ohm, BNC male connector for RG6 cable. Nickle plated body, gold pin. Crimp ferrule, solder pin. Learn More
-
RF Industries - Mini UHF/M - Mini UHF/M$6.03RF INDUSTRIES Mini-UHF male to Mini-UHF male straight adapter. Learn More
-
RF Industries - Right Angle SMA Male RP for RG58$5.93RF INDUSTRIES SMA male right angle connector *REVERSE* POLARITY for RG58, RG141, Times LMR195 cables. Gold plated body, gold plated pin. Crimp. Learn More
-
RF Industries - Mini-UHF Male/ UHF Female$6.17RF INDUSTRIES Mini-UHF male to UHF female adapter. Learn More
-
RF Industries - Reverse Gender TNC/M - TNC/F Adapter$7.28RF INDUSTRIES Reverse Polarity/Gender TNC male to TNC female adapter. Learn More
-
RF Industries - SMA Male Crimp-RG142/U & RG400$3.87RF INDUSTRIES SMA male crimp connector for RG142, 55, 223 and RG400 cables. Learn More
-
RF Industries - Rev. Gender SMA male$4.61RFI SMA reverse gender crimp connector. Male body, female contact. Gold plated body, Gold center pin. For RG58, 141 and Times LMR195 cables. Learn More
-
RF Industries - BNC Male Crimp-RG58,RG141$4.41RF INDUSTRIES BNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Silver plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - N Male/BNC Female Adapter$7.33RF INDUSTRIES N male to BNC female adapter. Silver plated body, gold plated contacts. Learn More
-
PCTEL - MAXRAD MFB Series Antenna Mount PVC$14.60The PCTEL Maxrad MMK8A aluminum antenna mount is designed for attaching a 1 1/4 inch diameter MFB antenna with a PVC base to a 2 1/2 inch maximum diameter mount. Secure your MFB series antenna with this aluminum antenna mount. Learn More
-
RF Industries - UNIDAPT - Unidapt 7/16 DIN Male Connector$28.25RF INDUSTRIES 7/16 DIN male unidapt connector. Use with female barrel to create inter-series adapters. Learn More
-
PCTEL Maxrad - 0-1000MHz, 3/8"-3/4" Hole Mount Only$6.95The PCTEL Maxrad BMATM38 vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-1000 MHz in thick surfaces. This brass permanent mount is for a 3/8 to 3/4 inch hole in mounting surfaces 3/16 to 1/4 of an inch thick. The PCTEL mobile antenna mount requires cable with connector. Thread size is 1 1/8 inch - 18. Learn More
-
RF Industries - Mini-UHF Female/ UHF Male$6.44RF INDUSTRIES Mini-UHF female to UHF male adapter. Learn More
-
RF Industries - Mini-UHF/M - FME/M Adapter$4.54RF INDUSTRIES Mini-UHF male to FME male (Euro Nipple) adapter. Learn More
-
RF Industries - SMA Male/ Right Angle/RG174$5.00RF INDUSTRIES SMA male right angle for RG174, 188, 188A and 316 cables. Solder center pin. Learn More
-
RF Industries - MiniUHF Male Crimp-RG58$2.75RF INDUSTRIES black mini-UHF male crimp connector for RG58 cables. Requires proper crimping tool for installation. Four piece assembly. Learn More
-
RF Industries - TNC Male Rt. Angle/LMR240$6.58RF INDUSTRIES TNC male right angle crimp connector for LMR240 cable. Nickle plated body, gold plated center pin, teflon dielectric. Learn More
-
PCTEL - Molded Base Antenna,Cell/PCS, 2dB, NMO Roof Mount$28.85The PCTEL BMAX824/1850 molded base dual band mobile antenna provides superior omnidirectional coverage in the cellular (824 - 894 MHz) and PCS (1850 - 1990 MHz) bands. This vehicle NMO roof mount antenna is designed to minimize loss and maximize gain. You can expect a unity gain in the cellular band and a gain of 2 dB in the PCS band with this whip antenna.This dual band cellular antenna features a molded polymer base, spring loaded contact pin and a 0.062 stainless steel open coil whip. Order Motorola-style mount for the PCTEL roof mount antenna separately. Learn More
-
RF Industries - BNC Male, RG59,62/ 75 ohm$3.09RF INDUSTRIES BNC male connector for RG59, 59A, 59B, 62, 62A, 62B, 62C and 210 cables. Nickle plated body, gold pin Crimp pin & braid. 75 ohm. Learn More
-
RF Industries - UHF Male Crimp-PROFLEX$3.31RF INDUSTRIES UHF male connector for PROFLEX and Times AA3096 cables. Nickle plated body and silver plated contacts. Crimp center pin, crimp on braid. Learn More
-
PCTEL Maxrad - ActiveGPS Antenna, Magnetic Mount, 26 dB, SMA$33.88MAXRAD 1575.42 MHz 26 dB GPS 3-5 volt active magnet mount antenna. Square black radome. Includes 15' RG174 and installed SMA connector. Learn More
-
RF Industries - Rev. Polarity N/M - N/F Adapter$9.35RFI Reverse Polarity N/Male (Female) to standard N/Female (jack). Nickle plated brass body, gold center pin. Learn More
-
PCTEL - 450-470 MHz 10dBd 7 Element Yagi Antenna$227.71PCTEL BLUEWAVE 450-470 MHz, 10 dBd gain yagi antenna. 7 element, 250 watts. N Female connector with 2 ft. pigtail. Includes mounting hardware BWC1001A. Learn More
-
PCTEL - 890-960 MHz 12dBd 11 Element Yagi Antenna$244.53PCTEL BLUEWAVE 890-960 MHz, 12 dBd gain yagi antenna. 11 elements, 200 watts. N Female connectoron 2 Ft. pigtail. Includes mounting hardware BWC1001. Learn More
-
RF Industries - TNC Male Rt. Angle/RG142$6.74RF INDUSTRIES TNC male right angle connector for RG142. Nickle plated body, gold plated center pin, teflon dielectric. Crimp connector. Learn More
-
RF Industries - SMA Male Crimp-RG8/U, LMR400$7.52RF INDUSTRIES SMA male connector for RG8/U, 9913, LMR400 Learn More
-
PCTEL - 2.4-2.485 GHz 15dBi Enclosed Yagi Antenna$113.94MAXRAD 2.4-2.485 GHz enclosed yagi 15 dBi gain antenna. Includes 18" LMR-195 jumper with N-female termination. Learn More
-
RF Industries - MiniUHF Female Crimp-RG142/223/400$3.75RF INDUSTRIES Mini-UHF female connector for RG142, 55, 223 and 400 cables. Nickle plated body, silver pin. 3 piece construction, crimp style. Learn More
-
RF Industries - SMA/F-SMA/M Adapter-RA$8.47RF INDUSTRIES Interseries Adapter. SMA female to SMA male right angle adapter. Gold plated center pin and nickel body and teflon dielectric. Learn More
-
RF Industries - TNC/F - TNC/F Adapter$4.09RF INDUSTRIES TNC female to TNC female adapter. Learn More
-
RF Industries - UHF/F - BNC/F Adapter$5.27RF INDUSTRIES UHF Female to BNC female adapter. Learn More
-
RF Industries - TNC/F - N/M Adapter$6.76RF INDUSTRIES TNC female to N male straight adapter, Learn More
-
PCTEL - 144-174 1/2 Wave w/ Spring, No Ground Plane$42.63MAXRAD 144-174 MHz. 1/2 wave, no ground plane 2.4 dB antenna with spring. Order Motorola style mount separately. Learn More
-
RF Industries - SMA Male RP Crimp RG8U / 9913$8.14RF INDUSTRIES SMA male RP (reverse polarity) connector for RG8/U, 9913, LMR400. Learn More
-
RF Industries - UHF Male Crimp-RG142$3.13RF INDUSTRIES UHF male connector for RG142. Nickle body, silver pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - MiniUHF Male Crimp-RG142/U$3.32RF INDUSTRIES Mini-UHF male connector for RG142/U. Nickel body silver center pin. Crimp: Center .068 Ferrule: .213 Learn More
-
RF Industries - BNC/M - SMA/M Adapter$7.37RF INDUSTRIES BNC male to SMA male straight adapter. Nickle plated body, gold plated contacts. Learn More
-
PCTEL - 896-970 MHz 9dB 6 Element Yagi Antenna$72.14PCTEL MYA9306 aluminum yagi antenna operates in the 896 - 970 MHz frequency range. This 900 MHz yagi antenna is unsurpassed in it's price to performance ratio. The MYA9306 is a 3-element, 8.1 dBi gain yagi that features rugged 6060-T6 aluminum construction, stainless steel hardware, and through boom mounting of all elements for years of reliable service. Elements are DC grounded to the boom. Maximum power input is 150 watts and is terminated with an N Female connector. Mounting hardware is included. Learn More
-
RF Industries - TNC Male Crimp-RG58,141$3.05RF INDUSTRIES TNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - UHF/F - BNC/M Adapter$5.20RF INDUSTRIES UHF female to BNC male adapter. Learn More
-
RF Industries - N Male/BNC Male Adapter$8.27RF INDUSTRIES N male to BNC male adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - MiniUHF Female Crimp RG8X$3.16RF INDUSTRIES Mini-UHF female connector for RG8X. Nickel plated body, silver pin, 3 piece construction, crimp style. Learn More
-
RF Industries - SMA/M/ - SMA/M Adapter$7.64RF INDUSTRIES SMA male to SMA male straight adapter. Gold plated body, gold plated contacts. Learn More
-
RF Industries - Mini-UHF Fem/Mini-UHF Fem$5.37RF INDUSTRIES Mini-UHF female to Mini-UHF female adapter. Learn More
-
RF Industries - N Female/UHF Female Adpt.$7.03RF INDUSTRIES N female to UHF female adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - UHF Male PL259-RG8,RG213$3.82RF INDUSTRIES UHF male connector for RG8, RG8A & RG213 cables. Silver plated shell, silver plated body. Teflon insulation. Solder pin and braid. Learn More
-
RF Industries RFN-1006-49I - N MaleCrimp for LMR400, CNT400, 8214, 9913 cables$9.94RF Industries N male straight connector for 400 Series cable such as LMR-400, CNT-400, Belden 8214 and 9913. White Bronze body with gold crimp center pin. This is a solderless center conductor connector. Learn More
-
PCTEL - VHF, UHF & 700-900 MHz Wide Spectrum Antenna$117.40The PCTEL PCTWSLMR wide spectrum multiband antenna supports multiband radio technology to provide full interoperability among emergency management and response personnel, regardless of frequency band used. It provides outstanding coverage of VHF and UHF frequencies, including 700 MHz public safety, 800 MHz and 900 MHz frequencies in a ready-to-install, no tune design. Its multiband elements are housed in a rugged, impact-resistant housing for maximum durability and its base is designed to interface with standard NMO mobile mounts to facilitate existing installation upgrades on public safety vehicles. Learn More
-
PCTEL Maxrad - 0-960MHz, 3/4" Brass Mount/ No Connector$17.42The PCTEL Maxrad NMO-52-360-XX-N vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 30 feet of RG58/U cable. No connector is included. Thread size is 1 1/8 inch - 18. Learn More
-
RF Industries - N Male Crimp for LMR400, CNT400, 8214, 9913 cables$9.56RF Industries N male straight connector for 400 Series cable such as LMR-400, CNT-400, Belden 8214 and 9913. White Bronze body with gold crimp center pin. This is a solder pin connector. Learn More
-
PCTEL - 1575.42 MHz GPS Timing Antenna, 40dB Amplifier$230.33The PCTEL GPS-TMG-40NMS GPS timing reference antenna is specifically designed for long-lasting, trouble-free deployments in congested cell-site applications. The 40 dB high gain amplifier is well suited to address attenuation issues associated with applications requiring longer cable runs. The proprietary quadrifiliar helix design, coupled with multi-stage filtering provides superior out-of-band rejection and lower elevation pattern performance than traditional patch antennas. It includes universal mounting hardware consisting of collar (GPS-TMG-MNT) and pipe clamp (GPS-TMG-LMNT). Learn More
-
PCTEL - 896-940 MHz 5dB Fiberglass Omni Antenna NF$143.28MAXRAD 896-940 MHz MFB Series Omnidirectional Antenna, fiberglass. 5dB Gain, 150 Watts. N Male with 16" jumper. Mounting hardware sold separate. Learn More
-
PCTEL - 0-1000 MHz, 3/4" Mount, RG58/U, TNC (loose)$18.56The PCTEL Maxrad SMC vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is a stainless steel permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U cable and a loose TNC connector. Thread size is 1 1/8 inch - 18. Learn More
-
RF Industries - Mobile Radio Adapter Kit$283.25RF INDUSTRIES interseries adapter kit. Contains 24 of the most popular adapters for the mobile radio professional. Incl. N,UHF & BNC adapters in soft zipper cas Learn More
-
PCTEL - GPS+, Stud, Black, SMA/TNC$132.31MAXRAD black 3/4" hole stud mount GPS+ combination antenna. Includes 17' RG174 with SMA male connector (GPS) & RG58/U with TNC connector. Mobile antenna not included. Learn More
-
RF Industries - UNIDAPT - Unidapt SMA Reverse Polarity Female Connector$6.76Reverse Polarity SMA Female Learn More
-
RF Industries - 3' LMR195 Jumper N Male to TNC Male$33.23N MALE TO TNC MALE; LMR-195; WITH tessco WIRELESS SOLUTIONS LABEL Learn More
-
RF Industries - 4.3/10 Male To N Female Adapter, WB-S-T$29.22RF INDUSTRIES Adapter 4.3/10 Male To N Female, WB-S-T. Learn More
-
RF Industries - 7/16 DIN Female to 4.3-10 DIN Male$32.74RF INDUSTRIES PIM Adapter, 7/16 DIN Female to 4.3-10 DIN Male, -160dBc. Learn More
-
PCTEL - Vandal Proof M Mount with N Connector$36.30The PCTEL Maxrad MVP vehicle roof mount antenna installation hardware kit is a special application NMO mount for high frequency Motorola-style mobile antennas 0-2400 MHz. This brass permanent mount is for a 5/8 inch hole in mounting surface. This thick plate mount can be used in surfaces up to 1/2 inch thick. Specially designed internal set screw locks on mount, make this roof mount vandal proof. The PCTEL mobile antenna mount requires cable and connector. Thread size is 1 1/8 inch - 18. Learn More
-
RF Industries - N/F - SMA/M Adapter$6.61RF INDUSTRIES N female to SMA male straight adapter. Nickel plated body, gold plated contacts. Learn More
-
RF Industries - Right Angle N/M RG142$10.22RF INDUSTRIES Right angle N male for RG142 cable. Silver body, gold pin. Learn More
-
RF Industries - N Male - N Male Adapter$9.27RF INDUSTRIES N male to N male straight adapter. Silver plated body, gold plated contacts. IP67 Rated. Learn More
-
RF Industries - TNC Male Crimp-RG58,141$3.25RF INDUSTRIES TNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
PCTEL - 144-174 1/2 Wave Antenna, No Ground Plane$31.41MAXRAD 144-174 MHz 1/2 wave, no ground plane antenna. 200 watts. 2.4dB gain. Order Motorola style mount separately. Learn More
-
RF Industries - UG175 Reducer-RG58$1.47RF INDUSTRIES UG-175. Nickle plated reducer for use with nickle plated PL-259 connectors on RG58 cables. Pack of 25. Learn More
-
RF Industries - UHF/F - UHF/M Angle Adapt$7.83RF INDUSTRIES UHF female to UHF male right angle adapter. Learn More
-
RF Industries - UHF Female-RG8,RG213,214$6.37RF INDUSTRIES UHF female connector for RG8/U, RG8A/U and RG213 cables. Nickle plated body, silver plated contact. Solder center pin, clamp on braid. Learn More
-
RF Industries - BNC/M - BNC/F Angle Adapt$6.07RF INDUSTRIES BNC female to BNC male 90 degree angle adapter. Learn More
-
RF Industries - TNC/F - N/F Adapter$5.52RF INDUSTRIES TNC female to N female straight adapter. 1" long. Learn More
-
RF Industries - BNC/F - SMA/F Adapter$4.34RF INDUSTRIES BNC female to SMA female adapter. Use with UNIDEN and Johnson SMR radios. For use with Motorola cellular phones, use SKU# 34211. Learn More
-
RF Industries - BNC Female Bulkhead-RG58U$5.88RF INDUSTRIES BNC female bulkhead connector for RG58/U cable. Nickle plated body, gold plated center contact. Crimp style connector. Learn More
-
PCTEL Maxrad -150-174MHz 10.2dB 6 Element Yagi Antenna$160.80MAXRAD 150-174 MHz 6 element VHF yagi antenna. 10.2dB gain, 300 watt. Field tunable. Direct UHF female termination. Includes mounting hardware. Learn More
-
RF Industries - TNC/F - UHF/M Adapter$6.07RF INDUSTRIES TNC female to UHF male straight adapter. Learn More
-
RF Industries - TNC Male Rt. Angle/RG58/U$6.74RF INDUSTRIES TNC male right angle connector for RG58 . Nickle plated body, gold plated center pin, teflon dielectric. Crimp style. .213 ferrule, Learn More
-
RF Industries - Mini-UHF Female/ BNC Male$5.92RF INDUSTRIES Mini-UHF female to BNC male adapter. Learn More
-
RF Industries - Center Pin for RFN-1006-3I$1.29RF INDUSTRIES Center Pin N Male connector RFN-1006-3I used with 9913, LMR-400 and 241543,CUS TL93605 cables. Learn More
-
RF Industries - UHF Male PL259-RG8,RG213$3.02RF INDUSTRIES UHF male connector for RG8, RG8A & RG213 cables. Nickle plated shell, silver plated body. Phenolic insulation. Solder pin and braid. Learn More
-
RF Industries - N Female/BNC Female Adpt.$7.55RF INDUSTRIES N female to BNC female adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - TNC Male Crimp-9913,LMR400$5.95RF INDUSTRIES TNC male connector for Belden 9913 and Times LMR400 cables. Nickel plated body, gold plated center pin. Solder center pin, Crimp on braid. Learn More
-
PCTEL - 118-940, 1/4 Wave Antenna, Titanium Gray$9.96MAXRAD 118-940MHz field tunable titanium gray antenna. Quarter wave, 150 watt, unity gain. Order desired Motorola mount separately. Learn More
-
RF Industries - N Male Crimp RG8/LMR400 Size$7.44RFI Hex/Knurl Combo N male for RG8 type. crimp pin, crimp ferule w/ heat shrink. Trimetal plated body, gold center pin. DOES NOT WORK WITH ULTRAFLEX CABLE Learn More
-
PCTEL Maxrad - 450-470MHz 5dB Whip$71.77MAXRAD 450-470 MHz 5dB whip and phasing assembly. Learn More
-
RF Industries - SMA Male Crimp-RG174$3.09RF INDUSTRIES SMA male connector for RG174, 188, 188A and 316 cables. Learn More
-
RF Industries - BNC Male-9913,9914,LMR400$7.35RF INDUSTRIES BNC male connector for 9913, 9914 8214, 3315, LMR400 cables. Silver plated body with gold center pin. Solder center pin, clamp on braid. Learn More
-
RF Industries - N Male-RG8/RG213/RG214$6.43RF INDUSTRIES N male connector for RG8, RG213 cables. Nickle plated body, gold plated center pin. Solder pin, clamp on braid. Learn More
-
RF Industries - UHF/F - UHF/F Bulkhead$5.32RF INDUSTRIES UHF female to UHF female bulkhead adapter with hardware. Learn More
-
RF Industries - Crimp Frame & Die 3 Cavity: .100"/.128"/.429"$88.31RF Industries cable crimp tool kit includes die set with 0.100, 0.128, and 0.429 inch cavities. This crimping tool with die sets will crimp RG8, Belden 9913, Ultraflex and Andrew braided coaxial cables. The cable crimper kit is compatible with connector type N 50 Ohm. Dies are composed of a fine blanked, high carbon tool steel. The cable crimping tool frame features an ergonomic molded finger and palm grip for easy use. Learn More
-
RF Industries - UHF Female-RG58,141,$5.60RF INDUSTRIES UHF female connector for RG58 and 400 cables. Nickle plated body, silver plated center pin. Crimp center pin and ferrule. Learn More
-
RF Industries - SMA/F - TNC/M Adapter$6.03RF INDUSTRIES SMA Female/TNC Male straight adapter. Nickle plated body, gold plated contacts. Learn More
-
RF Industries - TNC Male Clamp-RG8X,LMR24$4.12RF INDUSTRIES TNC male connector for RG8X and Times LMR240 cables. Teflon dielectric. Nickle plated body, silver pin. Solder center pin, clamp on braid. Learn More
-
PCTEL - 0-512 MHz, Mag Mount, RG58A/U, UHF male$27.91The PCTEL Maxrad G magnetic mount is a Motorola-style mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18. This chrome NMO mount includes 12 feet of RG58A/U cable. A PL259 connector is included and installed on the cable.The PCTEL chrome-plated vehicle magnet mount is designed for use with Motorola-style mobile antennas up to 512 MHz. Learn More
-
RF Industries - MiniUHF Quick Disconnect$3.09RF INDUSTRIES push-on crimp Mini-UHF male connector for RG58 cable. Quick disconnect feature is ideal for use with test equip. or transportable phones. Learn More
-
RF Industries - TNC/F - BNC/M Adapter$6.69RF INDUSTRIES TNC female to BNC male straight adapter. Learn More
-
RF Industries - Mini-UHF Male/ N Female$5.93RF INDUSTRIES Mini-UHF male to N female adapter. Learn More
-
RF Industries - BNC Male-Right Angle/RG58$6.70RF INDUSTRIES BNC male right angle connector for RG58/U and Ultralink cable. Nickel plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - N Female/BNC Male Adapter$7.69RF INDUSTRIES N female to BNC male adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - Mini-UHF Female/ TNC Male$5.79RF INDUSTRIES Mini-UHF female to TNC male adapter. Learn More
-
RF Industries - N Female Crimp-RG58/RG141$4.78RF INDUSTRIES N female connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Silver plated body, gold pin. .100 center pin can be crimped or solder Learn More
-
RF Industries - FME Male Crimp RG58/U$3.00RF INDUSTRIES FME male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickel plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - N Female Bulkhead for RG58$7.96RF INDUSTRIES Female crimp bulkhead w/ rear mount and O ring.connector for RG 58.Nickel body and gold center pin. Learn More
-
RF Industries - UHF Female for 1/2" LDF4-50A, LCF12-50J$33.92RFI UHF female Connector for LDF4-50A & LCF12-50J. Captivated silver center pin. White bronze plated brass body. Includes 2 o-rings and silicone tube. Learn More
-
RF Industries - TNC Female Crimp-RG58$3.68RF INDUSTRIES TNC female connector for RG58/U, 58A/U, 58C, 141, 141A and Ultralink cables. Learn More
-
RF Industries - 7/16 DIN Female to N Female barrell adapter$40.317-16 DIN adapters are highly desired in test applications such as base station PIM testing. These low loss, low VSWR adapters are designed to be used with portable antenna and cable analyzers. Learn More
-
RF Industries - Mini UHF/M - TNC/F Adapt$5.05RF INDUSTRIES Mini-UHF male to TNC female straight adapter. Learn More
-
RF Industries - SMA/F-N/F Adapter$6.95RF INDUSTRIES SMA Female to N Female Straight Adapter. Nickel plated body, gold plated pin, teflon dielectric. Learn More
-
PCTEL - 902-925 MHz 7dB Fiberglass Omni Antenna$157.54MAXRAD 902-928 MHz fiberglass antenna. Omni, 7dB gain, 150 watts. Direct N Female termination. Hardware not supplied. Learn More
-
RF Industries - RF adapter kit$193.63RF INDUSTRIES interseries adapter kit. 30 piece combination of male and female BNC, TNC, N, SMA, UHF and mini-UHF connectors. White bronze plating. Learn More
-
RF Industries - UHF Male Push-on RG58$3.21RF INDUSTRIES UHF male connector for RG58, 141 and 400 cables. Features push- on ferrule. No installation tools req. Nickle plated body, silver plated pin. Learn More
-
PCTEL - 746-869 MHz 3dB Fiberglass Omni Antenna$297.59MAXRAD 746-869 MHz Omnidirectional Fiberglass Antenna. 3 dB gain, 50 watt. Direct N Female connector. Order mount seperately. Learn More
-
PCTEL - 806-866MHz 3dB Fiberglass Omni Antenna$101.60MAXRAD 806-866 MHz fiberglass antenna. Omnidirectional, 3dB gain, 150 watts. Direct N female termination. Jumper & mounting hardware not supplied. Learn More
-
RF Industries - UHF Male Crimp-RG58,2Nut$2.80RF Industries UHF male crimp connector RG58 & LMR200 cable. Double nut coupling provides a deeper shell for recessed SO/239 UHF female connectors. Learn More
-
RF Industries - N/F-N/M Right Angle Adpt.$12.98RF INDUSTRIES N female to N male right angle adapter. Silver plated body, gold contacts. Dielectric is Teflon PTFE/TPX. Learn More
-
RF Industries - RF INDUSTRIES MCX Male Straight crimp plug$3.98RF INDUSTRIES MCX Male Straight crimp plug for RG174/U and RG316U Learn More
-
RF Industries - RCA/M - BNC/F Adapter$3.87RF INDUSTRIES BNC female to RCA male adapter. Nickle plated body, silver plated contacts. Learn More
-
RF Industries - TNC/F - FME/F Adapter$6.47RF INDUSTRIES TNC female to FME female adapter. Learn More
-
RF Industries - UHF Male Crimp-RG58,RG141,LMR200$3.41RF INDUSTRIES UHF male connector for RG58/U, RG58A/U, RG141 and LMR-200 cable. All surfaces are silver plated. Crimp center pin, crimp on braid. Learn More
-
RF Industries - 43 Pc. RF Adapter Kit$346.89RF INDUSTRIES interseries adapter kit. 43 piece combination of male and female BNC, TNC, N, SMA, UHF, mini-UHF, RCA & F connectors in a padded plastic case. Learn More
-
RF Industries - UNIVERSAL Crimp Tool Frame Only$59.32RF Industries universal cable crimp tool frame is compatible with RFA4005 and RFA4006 dies. This replacement crimp handle is ergonomically designed. The universal die frames are easily changed using either a Phillips or Standard screwdriver. Learn More
-
RF Industries - UNIDAPT - Unidapt Signal Sampler$59.81RF INDUSTRIES variable RF signal sampler An adjustable BNC female port allows a 20-80dB attenuated signal up to 3 GHz to be taped off. N male to N female in/out Learn More
-
RF Industries - N Male Crimp-9913/LMR400$129.73RF INDUSTRIES N male connector for 9913, Lmr400, AND 241543, CUS TL93605. Silver plated body, gold center pin. Crimp center pin, crimp on braid. Learn More
-
PCTEL - 450-460 MHz Unity Gain Fiberglass Omni Antenna$86.54PCTEL MFB4500 is a unity gain white fiberglass omnidirectional antenna operating in the 450 - 460 MHz frequency range. This UHF omni antenna has a power input of 250 watts, is DC grounded and terminated with an N male connector at the end of a 16 inch jumper. Order mounting hardware separately.PCTEL MFB4500 is a non-cellular omnidirectional antenna. This economical UHF antenna is composed of base matched half wave antennas that are enclosed in heavy-duty fiberglass radome with a sturdy aluminum mounting base. Learn More
-
PCTEL - 0-1000 MHz,Thick Roof Mount,3/4" Hole,No Connector$19.34The PCTEL A/S K794 vehicle roof mount antenna installation hardware kit is for special applications with low profile and MOSAIC antennas. This mobile antenna mount is for thick surfaces up to 1/2 inch deep. Hole size is 3/8 or 3/4 inch. The PCTEL permanent mount for low profile antennas 0-1000 MHz includes 17 feet of RG58/U cable. No connector is included. Learn More
-
RF Industries - TNC Male Crimp-PROFLEX$3.27RF INDUSTRIES TNC male connector for Proflex, Times AA3096 and equivalent cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - Right Angle N/M RG58$9.47RF INDUSTRIES Right angle N male crimp connector for RG58 cable. Silver plated body, gold pin. Learn More
-
RF Industries - TNC Female Crimp-8X,LMR24$4.66RF INDUSTRIES TNC female connector for RG8X and Times LMR-240 cables. Nickle plated body, gold plated center pin. Crimp pin and crimp body. Learn More
-
PCTEL - 3/4" Rubber Hole Plugs, 25 Pack$37.63PCTEL rubber hole plug for 3/4" hole. 1-1/2" overall diameter. Package of 25. Learn More
-
RF Industries - N Male Crimp-RG8/RG213$5.85RF INDUSTRIES N male connector for RG8U, RG8A/U and RG213 cables. Silver plated body, gold center pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - N/F - N/F Bulkhead Recept$8.93RF INDUSTRIES double N female bulkhead receptacle. Silver plated. Mounts in 11/16" hole. Learn More
-
RF Industries - TNC Male Clamp-RG58$3.98RF INDUSTRIES TNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, Silver pin. Solder center pin, clamp on braid. Learn More
-
PCTEL - 0-1000 MHz, Scratchless Mag, RG58/U, UHF (loose)$29.10The PCTEL Maxrad RBGP magnetic antenna mount is a Motorola-style mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18. This 3 inch scratch-less magnet mount has a rubber boot that prevents damage. The black NMO mount includes 12 feet of RG58/U cable. A Teflon UHF male connector is included but not installed.The PCTEL black vehicle magnet mount is designed for use with Motorola-style mobile antennas up to 1000 MHz. Learn More
-
RF Industries - Mini-UHF/M - Mini-UHF/M Rt. Angle Adpt.$6.61RF INDUSTRIES Mini-UHF female to Mini-UHF male right angle adapter. Square body. Learn More
-
RF Industries - SMA/M - UHF/F Adapter$8.36RF INDUSTRIES SMA male to UHF female straight adapter. Nickel plated body, gold plated contacts. Learn More
-
PCTEL - 108-512 1/4 Wave Antenna, 3/8" Hole$44.02PCTEL 108-512 MHz quarter wave antenna for 3/8" hole. Includes antenna, mount, cable and UHF male connector. Learn More
-
RF Industries - N Female/N Female Adapter$7.44RF INDUSTRIES N female to N female adapter. Silver plated body, gold plated contacts. Learn More
-
RF Industries - BNC Male-RG58,RG141$3.61RF INDUSTRIES BNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickel plated body, gold pin. Solder center pin, clamp on braid. Learn More
-
RF Industries - UHF/F - UHF/F Adapter$3.69RF INDUSTRIES UHF female to UHF female barrel straight adapter. Learn More
-
PCTEL - 118-940 MHz 1/4 Wave Antenna, Bright Chrome$15.65MAXRAD 118-940 MHz 1/4 wave antenna. 250 conti watt, heavy duty 5/16 thread stub contact assembly. Bright chrome. Mates with TAD/TAE, NMO,KD series 3/4 mt Learn More
-
PCTEL - 450-470 MHz Transit "Linebacker" Antenna, White$59.82PCTEL 450-470 MHz low clearance, transit "Linebacker" antenna. 100 watt, unity gain. UHF female. White. Learn More
-
RF Industries - MiniUHF Female Crimp-RG58$3.28RF INDUSTRIES Mini-UHF female connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, silver pin. 3 piece construction, crimp style. Learn More
-
PCTEL - 450-470 MHz 7.1dB 3 Element Yagi Antenna$62.32MAXRAD 450-470 MHz directional yagi antenna. 3 elem., 7.1dB gain, 300 watt. Direct UHF female termination. Includes mounting hardware. Learn More
-
RF Industries - BNC Male Crimp-RG8X,LMR24$3.19RF INDUSTRIES BNC male connector for RG8/X, Belden 9258 and Times LMR-240. cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
PCTEL - 150-174 Cellular Look-a-like, Open Coil$24.86MAXRAD 150-174 MHz open coil, cellular look-alike antenna. Black finish, 200 watts, unity gain, 15 1/2" long. Order Motorola style mount separately. Learn More
-
PCTEL - 450-470 MHz 5dB Antenna Only$38.98MAXRAD 450-470 MHz 3dB gain no ground plane antenna. 200 watt. Suitable for fiberglass vehicles. Order cable and mount separately. Learn More
-
RF Industries - BNC Male Crimp-RG174$3.20RF INDUSTRIES BNC male connector for RG174, (large ferrule), nickle plated body, gold center pin, crimp on center pin, crimp on braid. Learn More
-
PCTEL - 896-940 MHz 3dB Open Coil Antenna$18.29MAXRAD 896-940 MHz open coil antenna. 150 watt, 3dB gain. Order Motorola mount separately. Learn More
-
RF Industries - UHF/F - TNC/M Adapter$6.08RF INDUSTRIES UHF female to TNC male adapter. Learn More
-
PCTEL - 470-512 MHz 9dBd 5 Element Yagi Antenna$130.31MAXRAD 470-512 MHz Black 5 element, 9 dBd, 150 watt yagi antenna. No tuning required. Seamless aluminum construction N female termination. Mtg. hrdw. includ. Learn More
-
RF Industries - N Male Crimp-RG58/RG141$5.08RF INDUSTRIES N male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickel plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
RF Industries - BNC/M - SMA/F Adapter$6.07RF INDUSTRIES BNC male to SMA female straight adapter. Brass body, Gold plated contacts. Learn More
-
RF Industries - RG-8, 11, 213, 214/U, 9913, 9914 Adj. Strip tool$58.45RF Industries coaxial cable stripper has an adjustable blade for larger coax and telephone cables. This zinc diecast strip tool is designed to prep a variety of coaxial cables including RG 8, RG 11, RG 213, RG 214/U, 9913, and 9914. RF Industries coax stripper prevents cable distortion. Learn More
-
RF Industries - N Male Crimp-RG58/RG141$5.07RF INDUSTRIES N male connector for RG58/U, RG58A/U, RG141, RG58 Ultralink. cable. Silver plated body, gold pin. Crimp center pin, crimp on braid. Learn More
-
PCTEL - 132-174 MHz 2.4 dB Wide Band Antenna,Field Tunable$45.92The PCTEL MWV1322 wide-band, field-tunable, VHF mobile antenna operates within the frequency range, 132-174 MHz. Addressing equipment interoperability changes, this vehicle antenna provides superior bandwidth coverage without sacrificing performance. This field-tunable antenna features a gain of 2.4 dB (with a ground plane) or unity gain without a ground plane. Maximum power input is 200 watts.The 48 inch whip antenna features a rugged compact design that is able to withstand high-vibration conditions and maintain desired resonant frequency. For two-way communication, this PCTEL wideband VHF mobile antenna provides 26 MHz bandwidth without compromising performance. Learn More
-
PCTEL - 132-512 MHz 200W 1/4 Wave Antenna w/ Spring$31.27MAXRAD 132-512 MHz, 200 watt, quarter wave antenna with spring. Order desired Motorola type mount separately. Learn More
-
RF Industries - SMA/F - N/M adapter$8.86RF INDUSTRIES SMA Female/N Male straight adapter. Nickle plated body, gold plated contacts. Learn More
-
-
RF Industries - TNC Male Crimp-RG8X,LMR24$3.53RF INDUSTRIES TNC male connector for RG8X and Times LMR240 cables. Delrin dielectric. Nickle plated body, gold pin. Crimp center pin, crimp-on braid. Learn More
-
RF Industries - TNC Male Crimp-RG58,Black$3.27RF INDUSTRIES TNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. Crimp style . Black chrome finish. Learn More
-
RF Industries - N Female-RG8X,LMR240$8.17RF INDUSTRIES N female connector for RG8/X, Belden 9258, Micro 8/U, Remee 1600 and Times LMR-240 coaxial cables. Clamp/solder. Silver body, gold pin. Learn More
-
RF Industries - BNC/F - UHF/M Adapter$6.36RF INDUSTRIES BNC female to UHF male straight adapter. Learn More
-
PCTEL - 760-870 Closed Coil Antenna w/Spring, Black$32.96MAXRAD 760-870 MHz 3dB MAX base collinear closed coil roof mount antenna in black. Order Motorola style mount separately. Learn More
-
PCTEL - "L" Economy Mount for GPS Timing Antennas$25.23PCTEL "L" Economy mount for GPS timing antennas. Mount will fit masts upto 2" OD. Stainless Steel. Learn More
-
PCTEL - Mini Mag Mount, 12' RG-58A/U, Chrome$21.88The PCTEL Maxrad GM-NC mini magnetic mount is a Motorola-style, NMO mobile antenna mount that offers removability and a smaller magnet diameter. No drilling is required for installation making the location of the magnetic mount easy to adjust.The vehicle mount thread size is 1-1/8 inch - 18, and the magnetic base is 2 3/8 inch. This PCTEL chrome vehicle mini-magnetic mount for mobile antennas operates within 0 - 1000 MHz and includes 12 feet of RG58A/U cable. Connector is not included. Learn More
-
PCTEL - Low Profile Active GPS, 28dB, NMO$67.43MAXRAD 28dB 3-5 volt GPS antenna with ceramic patch element, ESD circuit protection, 2-stage low noise amplifier, and a SAW filter. NMO mountable. Black. Learn More
-
RF Industries - MiniUHF Male Crimp-RG8X$3.43RF INDUSTRIES Mini-UHF male connector for RG8X. Nickel plated body, silver pin, 3 piece construction, crimp style. Learn More
-
RF Industries - UHF Male Crimp-RG8,RG213$3.87RF INDUSTRIES UHF male connector for RG8, RG8A & RG213 cables. Silver plated shell, silver plated body. Teflon insulation. Crimp pin and braid. Learn More
-
PCTEL - 136-174 1/4 Wave Antenna w/ Spring$59.75MAXRAD 136-174 MHz, 160 watt, quarter wave antenna with spring. No tuning required. Order desired Motorola type mount separately. Learn More
-
PCTEL - 0-960 MHz, 3/4" Mount, Brass, PL259$14.80The PCTEL Maxrad NMO58AUCP vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58A/U cable and a crimp UHF connector. Thread size is 1 1/8 inch - 18. Learn More
-
PCTEL - 0-960 MHz, 3/4" Brass Mount/ No Conn$13.84The PCTEL Maxrad NMO58AU-NC vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58A/U coax cable. No connector is included. Thread size is 1 1/8 inch - 18. Learn More
-
PCTEL - 450-470 3dB 5/8 Wave Antenna w/ Spring$33.51MAXRAD 450-470 MHz 5/8 wave antenna. 200 watt, 3dB gain, with spring. Order desired Motorola style mount separately. Learn More
-
PCTEL - 445-470 Mosaic 3dB Antenna w/ Spring$45.81PCTEL 445-470 MHz MOSAIC 3dB gain collinear antenna with spring. Order Motorola style mount separately. Learn More
-
PCTEL Maxrad - ChromeRain Cap, 25 Pk$205.48MAXRAD bright chrome rain cap for Maxrad mounts. Protects from rain and other contaminates. Pack of 25. Learn More
-
PCTEL - 136-512 MHz Base Station Adapter Kit$30.23PCTEL MBS base station adapter kit. The MBS adapter allows a mobile VHF or UHF antenna to be used as a base station. By providing radials, the antenna can be used in areas where a ground plane is not available. Will accept any antenna that utilizes 1-1/8 inch 18 thread mounts. Mounts on 1 to 1.75 inch outside diameter masts. Converts any 132 - 512 MHz mobile antenna into a base station. Learn More
-
PCTEL - Mirror Mount Kit, RG58U, Mini UHF, Black$28.40MAXRAD mirror mount kit. Includes 3/4 " black mirror bracket, 17" RG58U cable and crimp Mini UHF connector. For use with elevated feed antennas. Learn More
-
PCTEL Maxrad - RedCollar Mount for GPS Timing Antennas$30.10PCTEL red powder coated collar mount for GPS timing antennas. Cast Aluminum. Learn More
-
RF Industries - BNC/F - BNC/F Adapter$3.27RF INDUSTRIES BNC female to BNC female straight adapter. Learn More
-
RF Industries - Crimp Tool Kit Crimps .042 to .429$414.28RF INDUSTRIES crimping tool kit. Includecrimp handle & 10 sets of dies. Phillip screwdriver is all you need to change dies. Crimps hex .042 to .429" Learn More
-
PCTEL - 430-470 MHz 150W Unity Titanium Gray$8.12MAXRAD 430-470 MHz 150 watt quarter wave unity gain titanium gray antenna. Order Motorola style mount separately. Learn More
-
PCTEL - 806-894 Low Silhouette Radom Covered$47.06PCTEL 806-894 low silhouette radome covered unity gain antenna. 100 watt. N female bulkhead connector. Learn More
-
PCTEL Maxrad - 1575 MHz4.5 dBic Timing Antenna, 40dB Amplifier$201.65PCTEL 1575 MHz GPS Reference Timing Antenna. 4.5 dBic, N Female connector. Incorporates a 40 dB low noise amplifier. Hardware not included. Learn More
-
PCTEL Maxrad - 132-174MHz 55" Whip, 5 Pack$49.88MAXRAD 131-174 MHz 55" .100 dia. tapered replacement whip. (Pack of 5) Learn More
-
PCTEL - 760-870 Open Coil Antenna w/Spring, Black$32.14MAXRAD 760-870 MHz 3dB MAX base collinear open coil roof mount antenna in black. Order Motorola style mount separately. Learn More
-
Copper lug 2 Hole/W/InspWindow, #8AWG 1/4 in Stud$5.07Copper lug 2 Hole/W/InspWindow, #8AWG 1/4 in Stud Learn More
-
-
-
-
-
-
-
Low PIM N Male to QMA Female Interseries Adapter$13.18Low PIM N Male to QMA Female Interseries Adapter Learn More
-
-
-
RF Industries - MiniUHF Male Crimp-RG58$2.09RF INDUSTRIES Mini-UHF male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. AMP style, pin in body. Learn More
-
PCTEL - 450-470 MHz 12.25dB 12 Element Yagi Antenna$130.65MAXRAD 450-470 MHz directional yagi antenna. 12 ele., 12.25dB gain, 300 watt. Direct UHF female termination. Includes mounting hardware. Learn More
-
PCTEL - 152-162 MHz 150W 1/4 Wave Antenna, Titanium Gray$8.46MAXRAD 152-162 MHz 150 watt quarter wave unity gain titanium gray antenna. Order Motorola style mount separately. Learn More