Pro Telecom Supply is a leading supplier of Commercial and Industrial Communications products. We carry the parts and equipment you need to complete your project on time and affordably. Our partnerships with the leading vendors in telecommunications gives you access to some of the worlds best technology products. Whether you are completing an RF project, or need components for your mobile workforce, Pro Telecom Supply has you covered.
All Products
-
TerraWave MultiBand Fiberglass Omni 4G Cellular Antenna$222.12TERRAWAVE SOLUTIONS 698-2700 MHz 6/7 dBi Fiberglass Omni Antenna with N-Style Jack (F) Connector. Includes Wall/Mast Mount Hardware Learn More
-
CommScope - NODE A AWS 0.5W Amplifier Module$2,685.50The Andrew 7577548-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the AWS band (1710-1755 MHz / 2110-2155 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
CommScope - NODE A PCS 0.5W Amplifier Module$2,755.81The Andrew 7577552-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 1900 MHz PCS band (1850-1910 MHz / 1930-1995 MHz). The digital channel module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
CommScope - NODE A Cellular 0.5W Amplifier Module$2,755.97The Andrew 7577540-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 850 MHz cellular band (824 - 849 MHz / 869 - 894 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
CommScope - 150-160 MHz 6/9dB Exposed Dipole Omni Antenna$833.56Andrew DB224-A 150 - 160 MHz omni, exposed dipole antenna. This adjustable field omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-0S pipe mount kit for 1.25 - 3.5 inch OD round members. Maximum power input is 500 watts. This four-bay exposed dipole VHF antenna can be arranged in an offset pattern producing a higher gain of 9 dB. Omni coverage and a gain of 6 dB can be achieved through a circular pattern. Andrew Solutions DB224 omni antenna meets RoHS 2002/95/EC. Learn More
-
CommScope - 896-960 MHz 10dB 7 Element Yagi Antenna$408.84Andrew DB499-K is a heavy duty yagi antenna operating in the 890 - 960 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More
-
CommScope - 1-1/4"Hanger Grommet for 3/8" Cable, 10 Pack$32.39COMMSCOPE 1-1/4" Hanger Grommet for 3/8" Cable, 10 Pack For use 1-1/4" snap-in hangers, clip style hangers, or standard hanger kits. Learn More
-
CommScope - 7/8" AVA-5 Automated Prep Tool$791.70Andrew Solutions EZfit automated coax cable coring and stripping preparation tool is made for use with AVA5 HELIAX 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently. This drill-driven coring tool also includes a T-handle for manual hand operation.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. For fast, clean, and consistent cable preparations go with Andrew Solutions EZfit drill-driven automated cable preparation tools. Learn More
-
Ventev / TerraWave - RPTNC Female/Jack to N Male/Plug Adapter$7.49RPTNC Female/Jack to N Male/Plug Adapter for Changing Connector Styles Learn More
-
CommScope - Standard Grounding Kit for 5/8" and 7/8"$38.37COMMSCOPE Standard grounding Kit for 5/8" & 7/8" (85, 90, 127A, 132 waveguide) with 24" lead and factory attached two hole lug. Learn More
-
CommScope - Torque Wrench, 1-1/4", 7-16 DIN Coupling Nut$119.27ANDREW 1-1/4" torque wrench for 7-16 DIN coupling nut. Designed w/ a mechanism to audibly notify the installer that proper torque has been reached. Learn More
-
CommScope - 7/8" Air Cable$14.29The Andrew HJ5-50 7/8 inch coaxial cable features an air dielectric. This 50 Ohm coax cable has an annular corrugated copper outer conductor and a smooth copper tube center conductor. The air cable has a 10 inch bending radius. This transmission line has a maximum frequency capacity of 5.2 GHz.The Andrew 7/8 inch coaxial cable with air dielectric is available in bulk and is priced per foot. Learn More
-
CommScope - ANDREW 4' FSJ1-50A Jumper, N Male$39.90The Andrew F1A-PNMNM-4 Sureflex cable assembly uses a 4 foot FSJ1-50A 1/4 inch superflexible cable with foam dielectric. This coax cable assembly has N male (silver body, gold pin) connectors installed on each end.The Andrew 4 foot cable jumper assembly is 100 percent waterproof and uses a unique double solder patented technique to give excellent system performance. Learn More
-
CommScope - SSM - Jumper Cold Shrink (7/8" to 1/4")$40.19COMMSCOPE 3M (TM) cold shrink weatherproofing Kit. Seals the connection between a 7/8" and 1/4" jumper w/N or DIN Connector. Learn More
-
CommScope - Plain Pipe3-1/2" OD x 174" Long$367.57CommScope Plain Galvanized Pipe 3-1/2" OD x 174" Long. Learn More
-
TerraWave - RPSMA Plug- RA RPSMA Jack Adapter$10.57TERRAWAVE RPSMA Female to Right Angle RPSMA Male Adapter. Learn More
-
CommScope - ANDREW 6' LDF4-50 Low PIM Jumper NM - DM$41.33The Andrew L4A-NMDM-6-P SureFlex cable assembly process uses a 6 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN Male and N Male connectors installed on each end.The Andrew 6 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
Ventev / TerraWave - Universal Pole Mount Kit - Fits 12" Diameter$126.49TERRAWAVE Universal Pole Mount Kit Fits up to a 12 in. Diameter Pole. Mounts TW 18x16 Poly enclosures. Learn More
-
CommScope - Self-locking Hanger 1/2", Black$95.25COMMSCOPE Self-locking Hanger for 1/2" Radiating Cable. 100 per package. Black in color. Learn More
-
TerraWave - 824-960 MHz11dBi Enclosed Yagi Antenna$52.39TerraWave T09110Y11206 yagi directional antenna operates within the frequency range 824 - 960 MHz and provides high gain at 11 dBi. Maximum power input is 100 watts with N-style Jack termination. A 12 inch pigtail is included along with articulating mount. The TerraWave directional yagi antenna is designed for applications in the 900 MHz frequency, including radio frequency identification (RFID) applications, cellular systems, global system for mobile (GSM) communications, code-division multiple access systems (CDMA) applications, multipoint applications and wireless video links. Learn More
-
Ventev / TerraWave - 824-960 MHz 15dBi Enclosed Yagi Antenna$103.03TerraWave T09150Y11206T is a directional yagi antenna that operates in the frequency range 824 - 960 MHz. This yagi provides a high gain of 15 dBi with a maximum power input is 50 watts. Included with this directional yagi antenna is an articulating mount and 12 inch pigtail with N Jack (female) connection.TerraWave 15 dBi directional yagi antenna is designed for applications in the 900 MHz frequency, including radio frequency identification (RFID) applications, cellular systems, global system for mobile (GSM) communications, code-division multiple access systems (CDMA) applications, multipoint applications and wireless video links. Learn More
-
TerraWave - RPSMA Jackto N Style Plug Adapter$15.98TERRAWAVE RPSMA Jack (F, M Center Pin) to N Style Plug (M) Adapter. For 50 ohm cable. Learn More
-
Ventev / TerraWave - TW Enclosure Ground Bar - 9 Port$12.46TERRAWAVE 9 Port Enclosure Ground Bus Bar. Includes 2 self-tapping screws. Learn More
-
Ventev / TerraWave - 800-2500 MHz 3dBi Ceiling Omni Antenna$29.82TerraWave M4030030O11206 is a dual-band ceiling mount omni antenna operating in the 800 - 2500 MHz frequency range. This indoor antenna operates within the cellular (806 - 960 MHz) and PCS (1700 - 2500 MHz) frequency ranges, both achieving a gain of 3 dBi. Maximum power input for this dual-band ceiling mount antenna is 50 watts. The antenna is terminated with an N-style Jack (female) connector and includes the mounting hardware. Learn More
-
CommScope - Combination Tool for 1/2" and 7/8" Cable$101.55The Andrew CT-7812 combination tool aids in field installation of connectors on 1/2 and 7/8 inch coax cables. The Andrew combination tool / combination wrench features open wrench ends, chamfer tool, file, inner conductor gauge, and jacket cut-off gauge.Works with Heliax 2.0 and Positive Stop connectors. Learn More
-
Ventev / TerraWave - 2.4-2.5 GHz 13dBi Panel Antenna$84.81TERRAWAVE 2.4GHz 13 dBi Panel Antenna with Integrated N-Style Jack Connector. Includes Articulating Pole Mount. Learn More
-
Ventev / TerraWave - 806-960 MHz 10dBi Enclosed Yagi Antenna$89.89TERRAWAVE 806-960 MHz 10 dBi Yagi Antenna with Articulating mount and 12" Pigtail and N-Style Jack. Learn More
-
Ventev / TerraWave - 2.4-2.483/5.1-5.8GHz 2.5/4dBi MIMO Omni Antenna$157.59TerraWave Solutions M6025040MO1D3620P is a mini multiple-input and multiple-output (MIMO) omnidirectional antenna that is ceiling mountable. The antenna features six integrated 2.4 and 5 GHz dual-band omni antennas in one enclosure, making it an ideal and aesthetically pleasing antenna to support demanding applications in next generation IEEE 802.11n indoor wireless communication systems. The mini MIMO omni (mounting screw) indoor antenna features six 36 inch dual band plenum leads terminated with PRSMA connectors.TerraWave MIMO antenna is an ideal antenna to support applications in the next generation IEEE 802.11n indoor wireless communication systems. Learn More
-
TerraWave -2.4-2.5/5.15-5.85GHz 6dBi Outdoor MIMO Antenna$279.13TERRAWAVE 2.4/5 GHz 6 dBi Outdor MIMO Omni with RPSMA Plug Connectors and L Bracket for Wall and/or Mast Mounting. 3 Pack - Dual Band Leads Learn More
-
CommScope - 1-1/4"Round Cushion$5.78COMMSCOPE stand. port cushion. For 1-1/4" corrugated cables. One hole. Learn More
-
CommScope - 15' LDF4-50 Low PIM Jumper NM - NM$54.08The Andrew L4A-NMNM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
TerraWave - 824-960 MHz2dBi Omnidirectional Antenna$27.89This ceiling mount indoor omni antenna is designed for applications operating in 824-960 MHz frequency, including radio frequency identification (RFID), cellular systems, global system for mobile (GSM) communications, code-division multiple access (CDMA) systems, point-to multipoint communications and wireless video links. Includes a screw on mount, and an N jack connector with a 12" pigtail. Learn More
-
CommScope - SureGround Grounding Kit, (7/8')$31.89COMMSCOPE SureGround for 7/8" Alum or Copper, corrugated or smooth cable w/ 24" #6 copper ground wire lead. Inlcudes factory attached two hole lug. Learn More
-
CommScope - 3/8" Cable Insert For 1/2" Hangers, 10 Pack$10.30COMMSCOPE 1/2" hanger adapter grommet. For use with 3/8" cable and 1/2" snap-in hangers, clip style hangers, or standard hanger kits. 10 per package Learn More
-
CommScope - 4" BootAssy, (3) 7/8"$52.88SnapSeal 4" boot assembly kit w/ 3 hole for 7/8" corrugated coax. Learn More
-
CommScope - 1/2" LDF4-50 Easiax Prep Tool$26.73Andrew Solutions EASIAX manual cable preparation tool is made for use with 1/2 inch HELIAX coaxial cable, including: LDF4-50, HL4RP-50 and RXL4 series inch foam dielectric cables. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More
-
CommScope - SSM - EW52Waveguide Snap-In Hanger Kit$125.71CommScope Snap-In Hangers for EW52 Waveguide attach without hardware. Constucted of heavy gauge stainless steel. Spacing varies depending on wind. Learn More
-
CommScope - 4" CableEntry Boot for EW90, 1 Hole$75.97COMMSCOPE 4" Cable Entry Boot. For 1 run of EW90. Use with Multiple Entrance Wall Plate. Learn More
-
CommScope - SSM - SnapStak Stackable Hangers, (1/2")$21.87COMMSCOPE "SNAPSTAK" Snap-in hangers for 1/2" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More
-
CommScope - HardwareKit, 3/8" x 3/4"$13.15COMMSCOPE Hardware Kit. 3/8" x 3/4" fillister head bolts, nuts and lock washers. Heavy gauge stainless steel construction. Kit of 10 sets. Learn More
-
CommScope - SnapStak Hangers for 1-1/4" corrugated cable$27.38COMMSCOPE "SNAPSTAK" Snap-in hangers for 1-1/4" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More
-
Ventev / TerraWave - BNC Jack For 400 Cable$4.32TERRAWAVE SOLUTIONS BNC Jack Connector (F) for 400 Cable Learn More
-
CommScope - SnapStak Hanger Tool$74.18ANDREW SnapStak Hanger Tool for installation and removal of SnapStak snap-in hangers. Learn More
-
CommScope - Grounding Kit 1/4" and 3/8"$29.24COMMSCOPE Grounding Kit for 1/4" & 3/8" diameter cables. Includes 24" ground wire w/ solid copper strap, weatherproffing, and two hole lug. Learn More
-
CommScope - Hanger for 7/8" Cable & Elliptical Waveguide 85/90$20.01CommScope cable hanger kit for use with 7/8" diameter cables and elliptical waveguide 85 and 90. Package of ten. Use one every three feet. Learn More
-
CommScope - Click On Hangers AVA/LDF5-50A, 10 pack$33.33COMMSCOPE Click-On Hangers. For use with AVA5-50 & LDF5-50A 7/8" diameter cable. Pkg of 10. Rec spacing every 4' up to 100mph wind speed,3' up to 150. Learn More
-
Ventev / TerraWave - BNC Jack For 195 Cable$3.27TERRAWAVE SOLUTIONS BNC Jack Connector (F) for 195 Cable Learn More
-
Ventev / TerraWave - SMA Female/Jack to SMA Female/Jack Adapter$5.45SMA Female/Jack to SMA Female/Jack Adapter for Extending Cables Learn More
-
CommScope - SMA Male 1/4" Superflex$27.24ANDREW SMA Male for 1/4" superflex. Cativated center pin with clamp style body attachment. Learn More
-
CommScope - HoistingGrip 1/2" Cable$15.74COMMSCOPE Hoisting Grip for 1/2" Corrugated Cables. Use at 200ft intervals to raise cable on tower. Can also be used with EW180, EW220 & EW240 waveguides. Learn More
-
CommScope - SSM - StiffArm Mounting Bracket$83.46CommScope Stiff Arm Mounting Bracket. Creates a stiff arm out of a separately ordered 2 3/8"OD pipe. Mounts to 2-3/8" thru 4-1/2" round or angle legs. Learn More
-
TerraWave - 18X16X10Hinge Lock Latch Opaque NEMA$274.14TERRAWAVE 18X16X10 NEMA4x Polycarbonate enclosure with solid door. Includes locking latches, mounting feet and no back plate. Gray with no holes drilled. Learn More
-
CommScope - SSM - Standard Hanger Kit, (EW63 Waveguide)$49.56CommScope Standard Hangers for EW63 hardware not included. Heavy gauge stainless steel. Spacing varies depending on wind speed & cable.10 pack. Learn More
-
CommScope - Hanger Hardware Kit, 3/8",1 Stack$25.69COMMSCOPE Click-On Hanger Hardware Kit for 1/2",5/8" or 7/8" coaxial cable. For use with 1 stack hanger in 3/8" size. Constructed of stainless steel. Learn More
-
CommScope - Grounding Kit 1/2", 2 Hole$31.01COMMSCOPE Grounding Kit for 1/2" diameter cables. Two hole lug for grounding to a tower/ bus bar. Incl 24" grnd cable w/ solid copper strap and weatherproofing. Learn More
-
CommScope - SSM - Jumper Cold Shrink (Antenna to 1/2")$23.55COMMSCOPE 3M (TM) cold shrink weatherproofing Kit. Seals the connection between the direct termination of an antenna & 1/2" jumper. Installs in less than 3 minutes. Learn More
-
CommScope - MiniUHF Male (F1MU) FSJ150A$13.87ANDREW mini UHF male (F1MU) connector for FSJ1-50A, 1/4" superflexible Heliax cable. Captivated silver pin, crimp ferrule. Nickle body. Learn More
-
CommScope - Plain EndPipe 2 3/8 x 63$58.74COMMSCOPE 2 3/8" x 63" Plain end pipe. Hot Dipped Galvanized steel. Learn More
-
CommScope - NODE ABlank Dummy Module$70.55The Andrew 7574285-00 blank dummy module is for the node A repeater system. This amplifier module fills any unused slot in the repeater. The Andrew dummy BDA module should be used to maintain correct airflow in the subrack. Learn More
-
Ventev / TerraWave - Lightning Arrestor 0-6 GHz TNCP-TNCBHJ$24.48TERRAWAVE SOLUTIONS 0-6 GHz Lightning Arrestor with TNC Plug (Male) to TNC Bulkhead Jack (Female). Includes L Shaped Mounting Bracket. Learn More
-
CommScope - 7/8" Easiax Prep Tool AVA5-50, LDF5-50A$39.24Andrew Solutions EASIAX manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including: AVA5, LDF5, and VXL5. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More
-
CommScope - 3/8" & 1/2" Superflex Prep Tool$28.85Andrew EASIAX manual cable preparation tool is made for use with 3/8 inch and 1/2 inch superflex HELIAX coaxial cables, including: FSJ2, FSJ4, ETS2, RXL2 and RXL4. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew EASIAX cable preparation tools. Learn More
-
Ventev / TerraWave - RPTNC Male/Plug to N Female/Jack Adapter$6.43RPTNC Male/Plug to N Female/Jack Adapter for Changing Connector Styles Learn More
-
TerraWave - N BH Jack(F) for 100 Cable$6.35TERRAWAVE N Bulkhead Jack (F Center Pin) Connector for 100 Cable. Learn More
-
CommScope - Universal Ground Bar$87.00COMMSCOPE 1/4" x 2-1/2" x 12-1/2" Universal Ground Bar. Made of solid copper with 33 pre-drilled holes. Ideal for all grounding app's incl towers & rooftops. Learn More
-
CommScope - Hanger Hardware Kit, 3/8", 3 Stack$29.79COMMSCOPE Click-On Hanger Hardware Kit for 1/2",5/8" or 7/8" coaxial cable. For use with 3 stack hanger in 3/8" size. Constructed of stainless steel. Learn More
-
CommScope - Click OnHangers LDF4-50A, 10 pack$27.17COMMSCOPE Click-On Hangers. For use with LDF4-50A 1/2" diameter cable. Package of 10. Recommended spacing every 3' up to 150 mph wind speed, 2'over 150 mph. Learn More
-
CommScope - SSM - 7/8" SnapStak Stackable Hanger$27.36CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More
-
Ventev / TerraWave - RPTNC Male/Plug to N Male/Plug Adapter$9.40RPTNC Male/Plug to N Male/Plug Adapter for Changing Connector Styles Learn More
-
Ventev / TerraWave - N Female/Jack To N Female/Jack Adapter$7.11N Female/Jack To N Female/Jack Adapter for Extending Cables Learn More
-
CommScope - CNT400PCoaxial Cable, White jack, Plenum$2.18The Andrew CNT400P braided coaxial cable (white jacket) is similar to RG8 but with lower loss and plenum-rated. This 50 Ohm coax cable has a 90 percent coverage braid shield for low loss. This plenum-rated transmission line offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization with LMR-400 connectors. The braided coax, plenum grade cable can be used in almost any application where handling characteristics, improved shielding and low loss is required. The Andrew WBC-400 plenum-rated, low loss coaxial cable with white jacket is available in bulk and is priced per foot. Learn More
-
TerraWave - 10x8x2Polycarbonate Non-Hinged Enclosure$154.29TerraWave 10x8x2 Polycarbonate Enclosure with Screw Cover, Solid Door, No Holes and Blank Backplate. Learn More
-
CommScope - SnapStak Hangers for 1/2" corrugated cable$25.90SnapStak Hangers for 1/2 in coaxial cable with quadruple stack capability and includes reinforcement bar. Learn More
-
-
-
Ventev / TerraWave - GPS/LTE/Cellular/PCS Quadband Omni Antenna$101.89The TerraWave M3045020M13115618 3G/4G/Wi-Fi/GPS Omnidirectional Antenna is designed for GPS/LTE/Cellular/PCS/2.4GHz applications. Includes three 13' pigtails - one pigtail dedicated to GPS, one pigtail dedicated to the LTE/Cellular/PCS frequency bands, and one pigtail dedicated to the 2.4 GHz frequency band. This antenna is an ideal solution for multiple frequency systems and includes a mounting gasket. Learn More
-
Ventev / TerraWave - 2.4/5 GHz 2/3.5 dBi Dual-Band, Bantam Omni Antenna$33.25The TerraWave M6020020R1D0002 2.4-2.5/5.15-5.85 GHz 2 dBi bantam antenna is designed to operate with any Wi-Fi network. The small, compact size and light structure make it easy to install and blends into any environment. Learn More
-
CommScope - ANDREW Hanger Hardware Kit, 3/8",3 Stack$33.86ANDREW Click-On Hanger Hardware Kit for 1-1/4" or 1-5/8" coaxial cable. For use with 3 stack hanger in 3/8" size. Constructed of stainless steel. Learn More
-
CommScope - 1/2" Corrugated Coax Automated Prep Tool$269.67Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with LDF4-50A HELIAX 1/2 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More
-
Ventev / TerraWave - 2.4-2.5/5.15-5.875 GHz Fiberglass Omni Antenna$80.74The TerraWave M7040070O10007 2400-2500/5150-5875 MHz Dual Band fiberglass omnidirectional antenna with 4/7 dBi gain. The antenna includes a direct N Male connector. Learn More
-
Ventev / TerraWave - 2.4-5 GHz 6dBi MIMO Outdoor Omni Antenna$403.81The TerraWave M6060060MO1D39920 Dual band 2.4/5 GHz MIMO Outdoor Omni Antenna is designed to operate with many manufacturers' enterprise-class 802.11n MIMO access points (APs). The antenna features three dual band leads that operate in the 2.4 GHz and 5 GHz frequency. With an enclosure that is designed to withstand harsh environments this antenna can support demanding indoor or outdoor applications in next generation IEEE 802.11n wireless communication systems. Includes 15 foot (LMR240) pigtails terminated with RPSMA Plug connectors. Learn More
-
Ventev / TerraWave - Wi-Fi Micro Omni Antenna L-Mounting Bracket$26.41Ventev's Wi-Fi Micro Omni Antenna L-Mounting Bracket is designed to provide secure mounting options for Ventev's TerraWave Wi-Fi Micro Omni antennas SKUs: 520174, 520175, 539825, and 539824. The mount is constructed of galvanized steel and is optimized for use on masts and walls. All Ventev antennas are covered by the company's two-year TerraNet warranty program. For questions and to purchase product, contact a Regional Sales Executive at 210-375-8482, 800-851-4965 or [email protected]. Learn More
-
CommScope Technologies LLC - 7/8" SnapStak Hanger, Includes Reinforcement Bar$31.37CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction. Quadruple stack capability, includes reinforcement bar. Learn More
-
CommScope Technologies LLC - ANDREW 10' FSJ4-50 Jumper, DIN Male/DIN Male$125.22ANDREW 10' SureFlex Jumper Consists of FSJ4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER with Sureguard weatherproofing. Learn More
-
Ventev / TerraWave - Industrial Articulating Antenna Mount$69.41Industrial Articulating Antenna Mount Learn More
-
Ventev / TerraWave - 698-960/1710-2700 MHz 2/4 dBi Omni Antenna$74.87The TerraWave M3020040O11207 Outdoor Omnidirectional Antenna has a frequency range of 698-960/1710-2170 MHz and works with any manufacturer's 3G or 4G cellular modem with a N-Style Plug. The Antenna features 2/4 dBi gain, 50 watts of max power, and an N-Style Plug connector. Includes Wall/Mast mount hardware. Learn More
-
Ventev / TerraWave - 2.4/5 GHz 10/11 dBi Panel Antenna$373.55TERRAWAVE 2.4/5 GHz 10/11 dBi Panel Antenna with N-Style Jack Connector. Learn More
-
CommScope - 1/2" Plenum Air Cable, Off White$3.79COMMSCOPE 1/2" Plenum Air 50 ohm cable. HL4RPV-50. Uses LDF4 connectors. Off White.*No automated prep tool available.MCPT-L4 is the prep tool that works. Learn More
-
Ventev / TerraWave - Captivated RPSMA Male for 600 Series Cable$20.59TERRAWAVE RPSMA Female for 600 Series Cable. Captivated Center Pin. Learn More
-
CommScope - Universal Ground Bar$79.401/4" x 4" x 14" Universal Ground Bar. Made of solid copper with 30 pairs of universal 3/8" hole over 3/8" x 5/8" slot. Wall or tower mount. Learn More
-
CommScope - ANDREW Universal Ground Bar$54.08ANDREW 1/4" x 2" x 10" Universal Ground Bar. Made of solid copper with 10 pairs of universal 3/8" hole over 3/8" x 5/8" slot. Wall or tower mount. Andrew's Universal Ground Bar is competitively priced and offers the mounting flexibility so often needed at sites. This solid copper bar accommodates vertical and 90 degree mounting configurations and provides a central point to collect grounding leads. Learn More
-
CommScope - 1-5/8" Air Cable$33.65The Commscope HELIAX Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacket. Learn More
-
CommScope - 138-150 MHz 6/9dB Exposed Dipole Omni Antenna$863.77Andrew DB224-E, 138 - 150 MHz omni exposed dipole antenna. This field adjustable VHF omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has 6 dBd gain and the offset has 9 dBd gain. The Andrew Solutions omni, exposed dipole antenna meets RoHS 202/95/EC. Learn More
-
-
TerraWave - 380-960 MHz2-Way Splitter w/ N Females$132.03TERRAWAVE SOLUTIONS 380-960 MHz 2-Way Cavity Splitter with N-Style Jack. 300 Watts. Learn More
-
CommScope - SSM -SureGround Grounding Kit, (1/2")$18.99COMMSCOPE SureGround for 1/2" Al or Cu corrugated or smoothwall coaxial cable. Tinned copper clip with 48" #6 copper bond & field attached, 2 hole lug. Learn More
-
TerraWave - 700-2700MHz 3-Way Splitterw/ N Females$55.48TERRAWAVE SOLUTIONS 700-2700 MHz 3-Way Splitter with N-Style Jack. 50 Watts. Learn More
-
TerraWave - 12" x 10" X6" P/C Steel Enclosure w/ Solid Door$135.38TERRAWAVE 12X10X6 Flex-Line Universal Steel Enclosure w/Solid Door, Key Lock Univ. Mtg Plate, (6) 1/2" Knockouts, (2) 5/8" Knockouts, (1) 3/4" Strain Relief Learn More
-
TerraWave - N Male To NMale Adapter$6.88TERRAWAVE N Male to N Male Adapter for 50 ohm cable. Learn More
-
Ventev / TerraWave - RPTNC Male/Plug to RPSMA Female/Jack Adapter$6.58RPTNC Male/Plug to RPSMA Female/Jack Adapter for Changing Connector Styles Learn More
-
CommScope - ANDREW 30'FSJ4-50B Jumper PDM/DM$181.37ANDREW 30' SureFlex Jumper. Consists of FSJ4-50B 1/2" superflexible cable with DIN Male on one end and Right Angle DIN Male on the other end. Learn More
-
CommScope - 7/8" RoundCushion 3 Hole$5.78COMMSCOPE stand. port cushion. For 7/8" corrugated cables. Three hole. Learn More
-
Ventev / TerraWave - Ground bar (2"x14") w/ mounting hardware$113.03TERRAWAVE Copper Ground Bus Bar 2" x 14" x 1/4" with mounting hardware. For use with up to 8 TerraWave Lightning Arrestors. Includes ground lug hardware. Learn More
-
Ventev / TerraWave - RPSMA Plug to RPSMA Plug Adapter$22.27RPSMA Male/Plug To RPSMA Male/Plug Adapter for Extending Cables Learn More
-
CommScope - ANDREW 12' LDF4-50 Low PIM Jumper DM - DM$41.12The Andrew L4A-DMDM-12-P SureFlex cable assembly process uses a 12 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 12 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
Ventev / TerraWave - Universal Pole Mount Kit - Fits 12" Diameter$81.93TERRAWAVE Universal Pole Mount Kit Fits up to a 12" diameter pole. Mounts TW 12x10 & 14x12 Poly & Fiberglass Encl., Flex-Line Steel Encl, &PC & St Heated/Cooled Encl. Learn More
-
CommScope - ANDREW 15'FSJ4-50B Jumper PDM/DM$128.74ANDREW 15' SureFlex Jumper. Consists of FSJ4-50B 1/2" superflexible cable with DIN Male on one end and Right Angle DIN Male on the other end. Learn More
-
CommScope - 7/8" Grounding Kit Prep Tool$268.06ANDREW Aluminum Grounding Kit Preparation Tool for 7/8" corrugated cable SG series grounding kits Learn More
-
TerraWave -2.4-2.483/5.1-5.8GHz 3/4dBi MIMO Omni Antenna$109.61TERRAWAVE 2.4-2.5 / 5.150-5.85 GHz 3/4 dBi 2 Pack Mini MIMO Omni with 2 Dual Band 36" Plenum Pigtails and RPSMA Plug (M, F). Screw Mount included. Learn More
-
Ventev / TerraWave - 698-960/1700-2700 MHz 7.5/8.5/10dBi Yagi Antenna$78.64TERRAWAVE Solutions 698-800/800-960/ 1700-2700 MHz 7.5/8.5/10 dBi Yagi with N-Style Jack (F) Connector. Includes articulating mast mount. Learn More
-
CommScope - SureGround Grounding Kit,1-1/4", 2 Hole Lug$22.63COMMSCOPE SureGround for 1-1/4" copper or aluminum, smooth or corrugated cable w/ 48" lead, unattached universal lug and weatherproofing. Learn More
-
CommScope - 164-174 MHz 6/9dB Exposed Dipole Omni Antenna$855.28Andrew DB224-C covers the 164 - 174 MHz omni, exposed dipole antenna. This field adjustable VHF omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has a 6 dBd gain and the offset has 9 dBd gain. The Andrew Solutions omni, exposed dipole antenna meets RoHS 2002/95/EC. Learn More
-
CommScope - U-Bolt for2-3/8" Pipe$3.45COMMSCOPE Galvanized U Bolt for 2-3/8" pipe. Size 3/8" diameter, 2-1/2" throat, 4" length, 2" thread. Comes with nuts and lock washers. Learn More
-
Ventev / TerraWave - RA-RPTNC Female/Jack to RPTNC Male/Plug Adapter$10.50Right Angle RPTNC Female/Jack to RPTNC Male/Plug Adapter for Changing Genders. RoHS Compliant. Learn More
-
TerraWave - 700-2700MHz 2-Way Splitter w/ N Females$39.72TERRAWAVE SOLUTIONS 700-2700 MHz 2-Way Splitter with N-Style Jack. 50 Watts. Learn More
-
Ventev / TerraWave - Lightning Arrestor 0-6 GHz RPTNCP-RPTNCBHJ$20.14TERRAWAVE SOLUTIONS 0-6 GHz Lightning Arrestor with RPTNC Plug (Female Center Pin) to RPTNC Bulkhead Jack (Male Center Pin) & L Shaped Mounting Bracket. Learn More
-
CommScope - NODE A2/A4Outdoor Wall Mount$226.95The Andrew 7597821 indoor wall mounting kit is for both node A2 and node A4 chassis. Additional mounting kits are available for outdoor wall mounting and outdoor pole mounting. Learn More
-
TerraWave - N-StylePlug (M) for 200 Cable$5.32TERRAWAVE Solutions N-Style Male (M Center Pin) for 200 Cable. Learn More
-
Ventev / TerraWave - RPTNC Female/Jack to RPSMA Male/Plug Adapter$6.95RPTNC Female/Jack to RPSMA Male/Plug Adapter for Changing Genders Learn More
-
CommScope - 7/8" RoundCushion 1 Hole$5.78COMMSCOPE stand. port cushion. For 7/8" corrugated cables. One hole. Learn More
-
CommScope - 1/2" RoundCushion 2 Hole$5.78COMMSCOPE stand. port cushion. For 1/2" corrugated cables. Two hole. Learn More
-
CommScope - 1-1/4" Hanger Grommet for 5/8" Cable, 10 Pack$36.03COMMSCOPE 1-1/4" Hanger Grommet for 5/8" Cable, 10 Pack For use 1-1/4" snap-in hangers, clip style hangers, or standard hanger kits. Learn More
-
CommScope - 450-470 MHz 9.2dBd Exposed Dipole Omni Antenna$1,984.35Andrew DB420-B omnidirectional, exposed dipole antenna operates in the 450 - 470 MHz frequency range. This UHF omni dipole antenna is 9.2 dBd gain, can handle up to 250 watts and is terminated with an N male connector at the end of a flexible lead. Included wit the antenna is a DB356-OS pipe mount lit for 1.25 - 3.5 inch OD round members. Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations and is extremely rugged. This antenna meets RoHS 2002/95/EC.
Additional shipping charges may apply- ships freight only. Learn More -
TerraWave - 824-960 MHz6dBi Omnidirectional Antenna$77.50TerraWave T09060O10006 omni antenna operates in the 824 - 960 MHz frequency range. The omnidirectional antenna provides 6 dBi gain and has a maximum power input of 100 watts. This vertically polarized omnidirectional antenna is terminated with an N-style jack connector and includes mounting hardware for 1.5-2.0" mast. TerraWave omni antenna T09060O10006 is designed for applications in communications, code-division multiple access (CDMA) systems, point-to-multipoint communications and wireless video links. This TerraWave outdoor-use omni antenna will hold up in tough environments. Learn More
-
CommScope - 806-869 MHz 10dB 7 Element Yagi Antenna$384.28Andrew DB499-A is a heavy duty yagi antenna operating in the 806 - 869 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More
-
CommScope - 450-470 MHz 9dB Exposed Dipole Omni Antenna$622.32Andrew DB411-B quasi omnidirectional, exposed dipole antenna operates in the 450 - 470 MHz frequency range. The 9 dB gain antenna can handle up to 250 watts. This UHF dipole antenna is terminated with an N male connector at the end of a flexible lead. Included with the antenna is a DB365-OS pipe mounting kit for 1.25 - 3.5 inch OD round members. The Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations. The DB411 is extremely rugged and is moisture resistant. The antenna meets RoHS 2002/95/EC. Learn More
-
Ventev / TerraWave - RPSMA Male/Plug to N Female/Jack Adapters$17.86RPSMA Male/Plug to N Female/Jack Adapter for Changing Connector Styles Learn More
-
CommScope - ANDREW 15' LDF4-50 Low PIM Jumper DM - DM$42.55The Andrew L4A-DMDM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
Ventev / TerraWave - N Male/Plug to N Female/Jack Adapter$9.59N Male/Plug to N Female/Jack Adapter for Changing Genders Learn More
-
TerraWave - BNC BH Jackfor 195 Cable$6.82TERRAWAVE Solutions BNC Bulkhead Jack Connector (F) for 195 Cable Learn More
-
TerraWave - 2 Dbi DualBnd RubberDuck 6"$6.912.4-2.5/4.9-5.85 GHz 2 dBi Dual Band Rubber Duck Antenna RPSMA connector Learn More
-
TerraWave - 700-2700MHz 66/33 Unequal Power Splitter$114.63TERRAWAVE SOLUTIONS 700-2700 MHz 2-Way Unequal Cavity Splitter with N-Style Jack. 500 Watts. Divides Power 33% & 67%. Learn More
-
CommScope - 1/2" Grounding Kit Prep Tool, Aluminum$260.32ANDREW 1/2" Aluminum Ground Kit Strip Tool for LDF4-50 foam cable. Manually operated for SG Series. Learn More
-
CommScope - ANDREW 3' LDF4-50 Low PIM Jumper NM - NM$75.33The Andrew L4A-NMNM-3-P SureFlex cable assembly process uses a 3 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 3 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
CommScope - ANDREW 20' LDF4-50 Jumper, DIN Male/DIN Male$50.49ANDREW 20' SureFlex Jumper Consists of LDF4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER. Learn More
-
CommScope - ANDREW 30'LDF4-50 Low PIM Jumper DM - DM$62.20The Andrew L4A-DMDM-30-P SureFlex cable assembly process uses a 30 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 30 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
CommScope - 1/2" Automated Prep Tool$269.60COMMSCOPE EASIAX Plus Automated Cable Preparation Tool for 1/2" coaxial cable. Learn More
-
57 VDC rectifier module for the ION-E system$1,416.2557 VDC rectifier module for the ION-E system Learn More
-
Manual Cable Preparation Tool for 7/8 in coaxial$161.47Manual Cable Preparation Tool for 7/8 in coaxial Learn More
-
Copper Ground Buss Bar, 1/4 in x 4 in x 24 in$213.71Copper Ground Buss Bar, 1/4 in x 4 in x 24 in Learn More
-
-
COMMSCOPE Hoist Grip 1-1/4 LDF6-50 Heliax Cable"$39.63COMMSCOPE Hoist Grip 1-1/4 LDF6-50 Heliax Cable" Learn More
-
2RU Fiber Patch Panel with Removable Lid$454.342RU Fiber Patch Panel with Removable Lid Learn More
-
-
30' LDF4-50A Jumper 7/16 DIN(M) - 7/16 DIN(M) R/A$74.9530' LDF4-50A Jumper 7/16 DIN(M) - 7/16 DIN(M) R/A Learn More
-
-
-
-
-
-
-
-
-
UAP, 10G, Expansion Port, Integrated Antenna$2,565.28UAP, 10G, Expansion Port, Integrated Antenna Learn More
-
CommScope - 1/2" Fire-retardant Radiating Cable$4.91COMMSCOPE 1/2" radiating mode cable with fire -retardant, halogen free polyolefin jacket. Learn More
-
2.4-2.483/5.1-5.8GHz 4/6dBi Ceiling Omni Antenna$110.522.4-2.483/5.1-5.8GHz 4/6dBi Ceiling Omni Antenna Learn More
-
-
2.4/5 GHz 6 dBi Directional WiFi Antenna 4 RPTNC$285.062.4/5 GHz 6 dBi Directional WiFi Antenna 4 RPTNC Learn More
-
6' D-CLASS LDF4-50 4.3-10 Male to 4.3-10 Male$52.786' D-CLASS LDF4-50 4.3-10 Male to 4.3-10 Male Learn More
-
-
-
-
Single-Axis Co-Loc Mnt for Cisco3800 AP&WiFi Ant.$229.98Single-Axis Co-Loc Mnt for Cisco3800 AP&WiFi Ant. Learn More
-
GigaSPEED Modular Patch Cord, Blue Jacket, 2M$26.80GigaSPEED Modular Patch Cord, Blue Jacket, 2M Learn More
-
2-Axis Co-Loc Mount for Cisco 3800 AP & WiFi Ant$201.692-Axis Co-Loc Mount for Cisco 3800 AP & WiFi Ant Learn More
-
2.4/5GHz 5/6 dBi WiFi Junction Box Antenna 4RPTNC$280.552.4/5GHz 5/6 dBi WiFi Junction Box Antenna 4RPTNC Learn More
-
15' Hybrid Fiber Tails SM 1 x 1, 2 Fiber-6-OVP Box$163.6515' Hybrid Fiber Tails SM 1 x 1, 2 Fiber-6-OVP Box Learn More
-
-
ANDREW 30' LDF4-50, DIN Male/DIN Male, Sureguard$77.00ANDREW 30' LDF4-50, DIN Male/DIN Male, Sureguard Learn More
-
TerraWave - StainlessSteel Hose Clamps. Replacement Straps$58.78TERRAWAVE (2) 1/2" W x 48" L Stainless Steel Hose Clamps. Replacement Straps For TWPMK-10-12-UNIV or TWPMK-16-UNIV. Min Diameter 3", Max Diameter 16". Learn More
-
Ventev / TerraWave - Lightning Arrestor 0-6 GHz SMAJ-SMABHJ$24.48TERRAWAVE SOLUTIONS 0-6 GHz Lightning Arrestor with SMA Jack (Female Center Pin) to SMA Bulkhead Jack (Female Center Pin) & L Shaped Mounting Bracket. Learn More