All Products

LAIRD 450 - 470 MHz Black, Elastomer Spring Mobile Coil Antenna, 3 dBi. Learn More

LAIRD 3/4" hole stainless steel black trunk groove bracket with screws. Order LAIRD all brass 3/4" hole mount, cable and connector separately. Learn More

Laird PC904N yagi antenna is designed for 800 MHz, ESMR, SMR, cellular or conventional applications. The 4-element antenna has 6 dBd gain and operates in the 896 - 980 MHz frequency range. This yagi antenna has a maximum power input of 200 watts and includes a 19 inch pigtail terminated with an N female connector. U-bolts; maximum mast diameter is 2-1/8 inches are supplied for mounting. Learn More

LAIRD 144-152 MHz Unity gain 1/4 wave black antenna. Brass button contact provides a superior match at feedpoint. Order mount separately. Learn More

BELDEN RG11 broadband, 75 ohm cable. 14 ga. solid center conductor. Duofoil and 40% aluminum braided shields. Black PVC jacket. Tested 5-1000 MHz. Sold per ft. Learn More

The Belden 9251 RG8A/U coaxial cable meets MIL-C-17D specifications. The 3/8 inch, 52 Ohm coax cable has a stranded center conductor and a poly dielectric. There is 97 percent shield coverage for low loss. The Belden stranded center coaxial cable requires 9913 connectors. This coax cable is available in bulk and is priced per foot. Learn More

LAIRD 118-970 MHz Unity gain field tunable 1/4 wave antenna in black. Brass button contact design provides for a superior match. Order mount seperately. Learn More

The Laird B1443S base-loaded 5/8 wave antenna with spring operates within the frequency range, 144-174 MHz. This VHF mobile antenna delivers high performance, with a gain of 3 dB. Maximum power input is 200 watts. The 49 inch stainless steel whip antenna has a UV-treated radome to resist sun damage. The housing is constructed using an ABS material, injection-molded around a solid brass insert and complete with plated brass fittings. Order NMO mount for your Laird mobile load coil antenna separately. Learn More

LAIRD 1575.42 MHz GPS 27dB 3-5V low profile black antenna. Order Motorola style mount separately. Learn More

LAIRD 132-174 MHz base loaded 1/2 wave antenna. 2.5 dB gain. Complete with load coil and 55" chrome whip. Order spring and/or mount separately. Learn More

BELDEN RG6 dual 75 ohm coaxial cable. 18 ga. solid center cond. with foil and braid shields. Two RG6 cables fused together. Sold per foot. Learn More

The Belden 8237 RG8/U coaxial cable has a stranded center conductor for greater flexibility. This 3/8 inch 52 Ohm coax cable uses a 97 percent braided shield for coverage and polyethylene vertical wire flame-rated insulation. The flame-rated insulation meets JAN-C-17A specifications.The Belden RG8-type cable uses RG8 connectors. The coaxial cable is available in bulk and is priced per foot. Learn More

LAIRD dual band 2400-2500/4900-5850 MHz Phantom low profile NMO mount antenna. Order Motorola style mount and cable separately. Learn More

LAIRD GSM99, GSM1800, UMTS Tri-Band Omni-Directional Antenna. 0.8, 2.9, 3.9 gain. 100 Watts. Vertically polarized, N Female Connector. Order mount seperate Learn More

The Laird ALLPMTC is an all-purpose mounting bracket made for use with DirectLink antennas and standard wall mounting. This antenna articulating mount fits 4 5/8 inch by 6 1/2 inch housing. Use this articulating antenna mount to adjust the antennas position horizontally or vertically. Learn More

LAIRD 144-174 MHz 2.5 dB base loaded 1/2 wave no ground plane antenna. Order spring and/or mount separately. Learn More

LAIRD 806-866 MHz Phantom Technology antenna. 3dB-MEG, 100W. 5/8" hole bolt mount, includes 14' RG58A/U cable & TNC male connector. Learn More

LAIRD 450-470 MHz Phantom Elite 3 dB-MEG low visibility black antenna. Order Motorola style mount and cable separately Learn More

LAIRD 7/8" Heavy Duty Boom Mounting Kit. Used to convert 7/8" boom yagis to mount. Learn More

Laird 2.4 GHz In-line Bulkhead Lightening Arrestor protector. 1000 Watts. 50 Ohms. N-Female on both ends. Learn More

Laird Y8963 yagi antenna is gold-anodized and fully welded to create a greater gain because of its ability to focus a signal in one direction. This yagi antenna operates in the 896 - 970 MHz frequency range. The Y8963 yagi is 3-elements providing 6 dBd gain with a maximum power input of 300 watts. The yagi is terminated with an N female connector and includes the stainless steel mounting hardware. Learn More

Laird PC9013N yagi antenna is designed for 800 MHz, ESMR, SMR, cellular or conventional applications. The 13-element antenna has 13 dBd gain and operates in the 902 - 928 MHz frequency range. This yagi antenna has a maximum power input of 200 watts and includes a 19 inch pigtail terminated with an N female connector. U-bolts; maximum mast diameter is 2-1/8 inches are supplied for mounting. Learn More

LAIRD 450-470 MHz Phantom Elite 3 dB-MEG low visibility white antenna. Order Motorola style mount and cable seperately. Learn More

LAIRD 902-928 MHz Phantom 3 dB gain permanent mount screwbase antenna. Base secures with locknut. Accepts N male connector. Black. Learn More

LAIRD 450-470MHz 5 element directional antenna. 9.2 dB gain 300 watt. Direct N female termination. Mounting hardware included. Gold anodized for long life. Learn More

LAIRD 890-960 MHz Phantom Elite 3 dB low visibility black antenna. Order Motorola style mount and cable separately. Learn More

Laird PC906N yagi antenna is designed for 800 MHz, ESMR, SMR, cellular or conventional applications. The 6-element antenna has 8.5 dBd gain and operates in the 896 - 940 MHz frequency range. The PC906N yagi antenna has a maximum power input of 200 watts and includes an a 19 inch pigtail terminated with an N female connector. U-bolts; maximum diameter is 2-1/8 inches are supplied for mounting. Learn More

LAIRD 450-470MHz 3 element directional antenna. 7.1 dB gain 300 watt. Direct N female termination. Mounting hardware included. Gold anodized for long life. Learn More

The Laird OC69271-FNM antenna is a Multi Band omnidirectional antenna with N Male connector that covers the domestic LTE700/Cellular/PCS/AWS/MDS, WiMAX 2300/2500, and global GSM900/GSM1800/UMTS/LTE2600 bands. The antenna can be used in both indoor and outdoor applications. It comes complete with mast mounting hardware and includes a UV stable radome enclosure. Learn More

The Laird OC69271-FNM antenna is a Multi Band omnidirectional antenna with N Female connector that covers the domestic LTE700/Cellular/PCS/AWS/MDS, WiMAX 2300/2500, and global GSM900/GSM1800/UMTS/LTE2600 bands. The antenna can be used in both indoor and outdoor applications. It comes complete with mast mounting hardware and includes a UV stable radome enclosure. Learn More

The Laird GR8UM 3/4" Magnetic antenna mount is a NMO mount. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust. A rubber boot is included to prevent damage to your vehicle. The chrome-plated NMO mount includes 12 feet of RG58A/U cable. An loose Mini UHF Male crimp connector is included. Learn More

Heavy Duty Antenna Mounting Kit for fiberglass antennas. Single Bracket, Heavy Duty. Will handle mast from 2" to 2.5" diameter. Learn More

LAIRD 806-896 MHz unity gain 1/4 wave antenna. Chrome. Order Motorola style mount separately. Learn More

LAIRD The CMS38606P is an indoor broadband low PIM omnidirectional ceiling mount antenna. It is designed to provide pattern coverage that is optimized for indoor requirements at 380-520 MHz, 600- 960 MHz, 1395-1435 MHz and 1690-6000 MHz frequency bands. The antenna features a pattern that has been specifically shaped to provide optimal performance from a ceiling mount location. Learn More

LAIRD 144-152 MHz Unity gain 1/4 wave antenna. Brass button contact design provides a superior match at feedpoint. Order mount seperately. Learn More

The Laird MABVT195 vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-1000 MHz in thick surfaces. This brass permanent mount is for a 3/4 inch hole in mounting surfaces up to 1/2 an inch thick. The Laird Technologies mobile antenna mount includes 17 feet of ATX195 cable but connector needs to be ordered separately. Thread size is 1 1/8 inch - 18. Learn More

The Laird B1360WS wide-band mobile load coil antenna with spring operates within the frequency range 136-174 MHz. This VHF mobile antenna features unity gain and requires no tuning. Maximum power input is 100 watts. The high-performance 1/2 wave antenna is designed with a special UV treated radome to resist sun damage. Order NMO mount separately. Learn More

LAIRD 118-512 MHz Unity gain field tunable 1/4 wave black antenna. Order mount separately. Learn More

Laird Y8066 gold-anodized fully welded 800 / 900 MHz model is great for cleaning up noisy 800 MHz signals. This yagi antenna operates in the 806 - 896 MHz frequency range. The Y8066 is 6-elements providing 9 dBd gain with a maximum power input of 300 watts. The yagi antenna is terminated with an N female connector and includes the stainless steel mounting hardware.Because of its ability to focus its signal in one direction, a greater gain is created. The internal matching design of this yagi directional antenna will not ice up, detune, or corrode. Laird 806 - 896 MHz aluminum finished yagi antenna can be custom VHF tuned. Learn More

LAIRD 118-512 MHz Unity gain field tunable 1/4 wave antenna. Order Motorola style mount separately. Learn More

LAIRD 150-174 MHz quarterwave black antenna with spring. Order Motorola style mount seperately. Learn More

The Belden 9913 RG8/U coaxial cable (black) is low loss with an "air" dielectric. This 50 Ohm coax cable has a solid center conductor and a semi-solid polyethylene dielectric. A 100 percent shield coverage prevents loss.The braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This RG8 cable requires 9913 specific connectors.The Belden RG8/U low loss coaxial cable with "air" dielectric is available in bulk and is priced per foot. Learn More

LAIRD 760-870 MHz Phantom 3 dB low visibility black antenna. Order Motorola style mount and cable separately. Learn More

LAIRD 152-162 MHz Unity gain 1/4 wave antenna. Brass button contact design provides a superior match at feedpoint. Order mount separately. Learn More

Laird FG9026 fiberglass omnidirectional antenna operates in the 902 - 928 MHz frequency range. This 900 MHz omni antenna has a gain of 6 dBd, a maximum power input of 100 watts and is terminated with a direct N Female connector. The FG9026 white omni antenna is constructed with a durable gold anodized sleeve and cap that will not oxidize. Order the FM1 or FM2 mount separately. Learn More

LAIRD 824-896MHz unity gain fiberglass omnidirectional, 150 watt power. Gold base. Direct N/f termination. Order 65724 or 69293 clamp set separately. Learn More

LAIRD 806-866MHz 3 dB gain fiberglass omnidirectional, 150 watt power Direct N female termination. Order 65724 or 69293 clamp set separately. Learn More

Laird FG1523 3 dBd gain omnidirectional antenna operates in the 152-156 MHz frequency range. This high performance fiberglass VHF omni antenna has a durable gold-anodized sleeve that will not oxidize and is terminated with an N female connector. Maximum power input is 250 watts. Order the FM1 or FM2 mount separately.Laird Technologies FG1523 omni antenna is a durable yet economical base station antenna solution. Learn More

The Belden 9913-500 RG8/U coaxial cable (black) is low loss with an "air" dielectric. This 50 Ohm coax cable has a solid center conductor and a semi-solid polyethylene dielectric. A 100 percent shield coverage prevents loss.The braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This air dielectric RG8 cable requires 9913 specific connectors.The Belden RG8/U low loss coaxial cable with "air" dielectric is available as a bulk 500 foot spool. Learn More

Laird FRX450 5 dBi gain fiberglass omnidirectional antenna operates in the 450 - 470 MHz frequency range. This UHF omni antenna has a 12 inch lead made of Ultralink cable and is terminated with an N female connector. Maximum power input is 150 watts. Mounting hardware is included.The UHF fiberglass antenna is highly reliable, provides exceptional value and has outstanding weather-proofing features to make this a durable and economical solution. The omni antenna is best suited for base station and talkarround applications and is ideal for medium applications. Learn More

LAIRD "L" Stainless steel bracket for trunk groove, 3/4" NMO and 17' RG58U cable with no connector. Learn More

Indoor Broadband Omni Antenna Learn More

Black Mag Mt, 17' Cable N Male Connector Learn More

4G/3G No Ground Plane Phantom Antenna White NMO Learn More

Learn More

Learn More

Learn More

3/4 Style Magnetic Mount Learn More

The Belden 9913F7 RG8/U high-flex black coaxial cable is designed for mobile applications. The PVC jacket with un-bounded aluminum tape allow for end stripping with automated cable prep tools. This 50 Ohm coax cable has a 100 percent coverage foil shield, stranded center conductor, and foam polyethylene dielectric.This braided coax cable uses standard connectors.The Belden RG8/U high-flex, coaxial cable is available in bulk and is priced per foot. Learn More