All Products

BELDEN RG11 broadband, 75 ohm cable. 14 ga. solid center conductor. Duofoil and 40% aluminum braided shields. Black PVC jacket. Tested 5-1000 MHz. Sold per ft. Learn More

The Belden 9251 RG8A/U coaxial cable meets MIL-C-17D specifications. The 3/8 inch, 52 Ohm coax cable has a stranded center conductor and a poly dielectric. There is 97 percent shield coverage for low loss. The Belden stranded center coaxial cable requires 9913 connectors. This coax cable is available in bulk and is priced per foot. Learn More

BELDEN RG6 dual 75 ohm coaxial cable. 18 ga. solid center cond. with foil and braid shields. Two RG6 cables fused together. Sold per foot. Learn More

The Belden 8237 RG8/U coaxial cable has a stranded center conductor for greater flexibility. This 3/8 inch 52 Ohm coax cable uses a 97 percent braided shield for coverage and polyethylene vertical wire flame-rated insulation. The flame-rated insulation meets JAN-C-17A specifications.The Belden RG8-type cable uses RG8 connectors. The coaxial cable is available in bulk and is priced per foot. Learn More

TELEWAVE 148-174 MHz directional yagi antenna. 5dB gain, 500 watts. Includes harness with N female termination. and mounting hardware. Learn More

Telewave ANT450D is a single exposed dipole antenna that operates in the 406 - 512 MHz frequency range. This unity gain UHF 1/2 wave dipole antenna has a power input of 500 watts. The antenna is terminated with an N male connector on the harness feed. The ANT450D mounts to a 1.5 to 2.5 inch galvanized steel support pipe or tower leg. Mast is not included.This omnidirectional antenna is ideal for many applications such as trucking, business, public safety, government, and amateur radio because of the wide bandwidth and high efficiency this antenna produces. Each antenna is sealed with Txylan coating to provide protection from corrosive gases, UV radiation, salt spray, acid rain, wind blown abrasives and ice buildup. Learn More

Telewave ANT150F2 omnidirectional antenna operates in the frequency range 148 - 174 MHz. The 2.5 dB gain VHF fiberglass collinear omni antenna can handle 500 watts. Also included is a removable 24 inch RG-213 jumper and features a recessed N female connector. A dual clamp set for mounting to a 1.5" to 3" diameter support pipe is included.The rugged, high-tech radome and brass and copper element construction with a path to DC ground potential for lightening protection ensure survivability in all environmental conditions. The Telewave ANT150F2 omnidirectional antenna is ideal for use in all environmental conditions. Learn More

TELEWAVE 132-174/404-470 MHz crossband coupler. 150 watts per channel. 0.3dB insertion loss per pair. N/F term. 2 required. Broadbanded. Learn More

Telewave ANT150D single folded dipole antenna covers the 138 - 174 MHz frequency range. This VHF antenna has a precision phasing harness for optimum performance and is terminated with an N male connector. The dipole antenna achieves 1 - 2.5 dBd gain dependent on its pattern and has a maximum power input of 500 watts. Clamp set is included, need to purchase mast separately.This Telewave ANT150D adjustable pattern omni antenna is constructed with 6061-T6 aluminum and is welded at the base for maximum strength. Elements are sealed with a high-tech coating that protects against corrosive gases, UV radiation, salt spray, acid rain and wind blown abrasives. Learn More

TELEWAVE 216-240 MHz directional yagi antenna. 5 dB gain. 500 watts. 15 dB front-back ratio. Heavy duty with Txylan coating. N/F connector. includes hardware. Learn More

TELEWAVE 406-512 MHz exposed dipole array antenna. Adjustable pattern. 3dB gain, 500 watts. Includes harness with N male termination. Mast not included. Learn More

The Belden 9913 RG8/U coaxial cable (black) is low loss with an "air" dielectric. This 50 Ohm coax cable has a solid center conductor and a semi-solid polyethylene dielectric. A 100 percent shield coverage prevents loss.The braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This RG8 cable requires 9913 specific connectors.The Belden RG8/U low loss coaxial cable with "air" dielectric is available in bulk and is priced per foot. Learn More

The Belden 9913-500 RG8/U coaxial cable (black) is low loss with an "air" dielectric. This 50 Ohm coax cable has a solid center conductor and a semi-solid polyethylene dielectric. A 100 percent shield coverage prevents loss.The braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This air dielectric RG8 cable requires 9913 specific connectors.The Belden RG8/U low loss coaxial cable with "air" dielectric is available as a bulk 500 foot spool. Learn More

TELEWAVE 734-960 MHz omnidirectional collinear antenna. 2.5dB gain, 500 watt. Direct N female termination. Includes jumper with N type Male termination. and mounting hardwar Learn More

The Belden 9913F7 RG8/U high-flex black coaxial cable is designed for mobile applications. The PVC jacket with un-bounded aluminum tape allow for end stripping with automated cable prep tools. This 50 Ohm coax cable has a 100 percent coverage foil shield, stranded center conductor, and foam polyethylene dielectric.This braided coax cable uses standard connectors.The Belden RG8/U high-flex, coaxial cable is available in bulk and is priced per foot. Learn More