Pro Telecom Supply is a leading supplier of Commercial and Industrial Communications products. We carry the parts and equipment you need to complete your project on time and affordably. Our partnerships with the leading vendors in telecommunications gives you access to some of the worlds best technology products. Whether you are completing an RF project, or need components for your mobile workforce, Pro Telecom Supply has you covered.
All Products
-
CommScope - NODE A AWS 0.5W Amplifier Module$2,685.50The Andrew 7577548-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the AWS band (1710-1755 MHz / 2110-2155 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
CommScope - NODE A PCS 0.5W Amplifier Module$2,755.81The Andrew 7577552-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 1900 MHz PCS band (1850-1910 MHz / 1930-1995 MHz). The digital channel module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
CommScope - NODE A Cellular 0.5W Amplifier Module$2,755.97The Andrew 7577540-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 850 MHz cellular band (824 - 849 MHz / 869 - 894 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
Times Microwave Systems - LMR-195 and LMR-200 Cable Prep Tool$135.50LMR-195 and LMR-200 Cable Prep Tool Learn More
-
Times Microwave Systems - TNC Male Right Angle Crimp-LMR400$21.52TIMES TNC Male Right Angle Crimp connector for LMR-400 coaxial cable. Nickel body, Silver center pin. Teflon dielectric. DOES NOT WORK ON 400-UF. Learn More
-
Times Microwave Systems - Mini-UHF Male -LMR200$4.09TIMES Mini-UHF male crimp connector for LMR- 200 cable. Silver plated bodies, gold center pin. Solder center pin, Crimp on braid. Learn More
-
Times Microwave Systems - LMR-600 1/2" Foam Cable$2.98The Times Microwave LMR-600 1/2 inch standard coax cable with foam dielectric has a UV-resistant Polyethylene jacket for outdoor use. The Times Microwave LMR-600 1/2 inch foam coaxial cable is available in bulk and is priced per foot. Learn More
-
CommScope - 150-160 MHz 6/9dB Exposed Dipole Omni Antenna$833.56Andrew DB224-A 150 - 160 MHz omni, exposed dipole antenna. This adjustable field omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-0S pipe mount kit for 1.25 - 3.5 inch OD round members. Maximum power input is 500 watts. This four-bay exposed dipole VHF antenna can be arranged in an offset pattern producing a higher gain of 9 dB. Omni coverage and a gain of 6 dB can be achieved through a circular pattern. Andrew Solutions DB224 omni antenna meets RoHS 2002/95/EC. Learn More
-
Times Microwave Systems - LMR-200 Flex Cable$1.02The Times Microwave LMR-200 low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. available in bulk and sold per foot. Learn More
-
CommScope - 896-960 MHz 10dB 7 Element Yagi Antenna$408.84Andrew DB499-K is a heavy duty yagi antenna operating in the 890 - 960 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More
-
CommScope - 1-1/4"Hanger Grommet for 3/8" Cable, 10 Pack$32.39COMMSCOPE 1-1/4" Hanger Grommet for 3/8" Cable, 10 Pack For use 1-1/4" snap-in hangers, clip style hangers, or standard hanger kits. Learn More
-
Times Microwave -Bulkhead and flange mount Arrestor, N/F$77.23TIMES MICROWAVE 20-1000 MHz general coverage bulkhead and flange mt. 10KA surge. <200uJ throughput energy. N/F connectors. IP67 weatherized. Learn More
-
CommScope - 7/8" AVA-5 Automated Prep Tool$791.70Andrew Solutions EZfit automated coax cable coring and stripping preparation tool is made for use with AVA5 HELIAX 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently. This drill-driven coring tool also includes a T-handle for manual hand operation.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. For fast, clean, and consistent cable preparations go with Andrew Solutions EZfit drill-driven automated cable preparation tools. Learn More
-
CommScope - Standard Grounding Kit for 5/8" and 7/8"$38.37COMMSCOPE Standard grounding Kit for 5/8" & 7/8" (85, 90, 127A, 132 waveguide) with 24" lead and factory attached two hole lug. Learn More
-
CommScope - Torque Wrench, 1-1/4", 7-16 DIN Coupling Nut$119.27ANDREW 1-1/4" torque wrench for 7-16 DIN coupling nut. Designed w/ a mechanism to audibly notify the installer that proper torque has been reached. Learn More
-
CommScope - 7/8" Air Cable$14.29The Andrew HJ5-50 7/8 inch coaxial cable features an air dielectric. This 50 Ohm coax cable has an annular corrugated copper outer conductor and a smooth copper tube center conductor. The air cable has a 10 inch bending radius. This transmission line has a maximum frequency capacity of 5.2 GHz.The Andrew 7/8 inch coaxial cable with air dielectric is available in bulk and is priced per foot. Learn More
-
CommScope - ANDREW 4' FSJ1-50A Jumper, N Male$39.90The Andrew F1A-PNMNM-4 Sureflex cable assembly uses a 4 foot FSJ1-50A 1/4 inch superflexible cable with foam dielectric. This coax cable assembly has N male (silver body, gold pin) connectors installed on each end.The Andrew 4 foot cable jumper assembly is 100 percent waterproof and uses a unique double solder patented technique to give excellent system performance. Learn More
-
CommScope - SSM - Jumper Cold Shrink (7/8" to 1/4")$40.19COMMSCOPE 3M (TM) cold shrink weatherproofing Kit. Seals the connection between a 7/8" and 1/4" jumper w/N or DIN Connector. Learn More
-
Times Microwave Systems - LMR400-75 3/8" Coaxial Cable$1.61TIMES MICROWAVE DC - 2.5 GHz 3/8" LMR400-75 coax cable. 75 ohm. Lower loss than RG11. Uses LMR400-75 connectors only. Learn More
-
CommScope - Plain Pipe3-1/2" OD x 174" Long$367.57CommScope Plain Galvanized Pipe 3-1/2" OD x 174" Long. Learn More
-
CommScope - ANDREW 6' LDF4-50 Low PIM Jumper NM - DM$41.33The Andrew L4A-NMDM-6-P SureFlex cable assembly process uses a 6 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN Male and N Male connectors installed on each end.The Andrew 6 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
CommScope - Self-locking Hanger 1/2", Black$95.25COMMSCOPE Self-locking Hanger for 1/2" Radiating Cable. 100 per package. Black in color. Learn More
-
Times Microwave Systems - LMR600-75 1/2" Coaxial Cable$2.90TIMES MICROWAVE DC - 2.5 GHz 1/2" LMR600-75 coax cable. 75 ohm. Lower loss than RG11. Uses LMR600-75 connectors only. Learn More
-
CommScope - Combination Tool for 1/2" and 7/8" Cable$101.55The Andrew CT-7812 combination tool aids in field installation of connectors on 1/2 and 7/8 inch coax cables. The Andrew combination tool / combination wrench features open wrench ends, chamfer tool, file, inner conductor gauge, and jacket cut-off gauge.Works with Heliax 2.0 and Positive Stop connectors. Learn More
-
Times Microwave Systems - Rev. Pol TNC Male LMR400$25.06TIMES reverse polarity TNC male (Female) for LMR400 coaxial cable. Meets FCC specs for use with Spread Spectrum technology. Crimp type. DOES NOT WORK WI Learn More
-
CommScope - 1-1/4"Round Cushion$5.78COMMSCOPE stand. port cushion. For 1-1/4" corrugated cables. One hole. Learn More
-
CommScope - 15' LDF4-50 Low PIM Jumper NM - NM$54.08The Andrew L4A-NMNM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
CommScope - SureGround Grounding Kit, (7/8')$31.89COMMSCOPE SureGround for 7/8" Alum or Copper, corrugated or smooth cable w/ 24" #6 copper ground wire lead. Inlcudes factory attached two hole lug. Learn More
-
Times Microwave Systems - TNC Male Hex/Knurl Combo No Braid Trim LMR400$12.40TIMES TNC male Advantage connector for LMR-400. Gold pin. Silver plate body, gold center pin. No braid trim. Learn More
-
CommScope - 3/8" Cable Insert For 1/2" Hangers, 10 Pack$10.30COMMSCOPE 1/2" hanger adapter grommet. For use with 3/8" cable and 1/2" snap-in hangers, clip style hangers, or standard hanger kits. 10 per package Learn More
-
Times Microwave Systems - LMR-240 Prep Tool for virtually all connectors$132.21TIMES MICROWAVE All-In-One Combination Prep Tool for prep of LMR240 cables for crimp or clamp connectors. Learn More
-
CommScope - 4" BootAssy, (3) 7/8"$52.88SnapSeal 4" boot assembly kit w/ 3 hole for 7/8" corrugated coax. Learn More
-
CommScope - 1/2" LDF4-50 Easiax Prep Tool$26.73Andrew Solutions EASIAX manual cable preparation tool is made for use with 1/2 inch HELIAX coaxial cable, including: LDF4-50, HL4RP-50 and RXL4 series inch foam dielectric cables. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More
-
CommScope - SSM - EW52Waveguide Snap-In Hanger Kit$125.71CommScope Snap-In Hangers for EW52 Waveguide attach without hardware. Constucted of heavy gauge stainless steel. Spacing varies depending on wind. Learn More
-
CommScope - 4" CableEntry Boot for EW90, 1 Hole$75.97COMMSCOPE 4" Cable Entry Boot. For 1 run of EW90. Use with Multiple Entrance Wall Plate. Learn More
-
CommScope - SSM - SnapStak Stackable Hangers, (1/2")$21.87COMMSCOPE "SNAPSTAK" Snap-in hangers for 1/2" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More
-
CommScope - HardwareKit, 3/8" x 3/4"$13.15COMMSCOPE Hardware Kit. 3/8" x 3/4" fillister head bolts, nuts and lock washers. Heavy gauge stainless steel construction. Kit of 10 sets. Learn More
-
CommScope - SnapStak Hangers for 1-1/4" corrugated cable$27.38COMMSCOPE "SNAPSTAK" Snap-in hangers for 1-1/4" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More
-
CommScope - SnapStak Hanger Tool$74.18ANDREW SnapStak Hanger Tool for installation and removal of SnapStak snap-in hangers. Learn More
-
CommScope - Grounding Kit 1/4" and 3/8"$29.24COMMSCOPE Grounding Kit for 1/4" & 3/8" diameter cables. Includes 24" ground wire w/ solid copper strap, weatherproffing, and two hole lug. Learn More
-
CommScope - Hanger for 7/8" Cable & Elliptical Waveguide 85/90$20.01CommScope cable hanger kit for use with 7/8" diameter cables and elliptical waveguide 85 and 90. Package of ten. Use one every three feet. Learn More
-
CommScope - Click On Hangers AVA/LDF5-50A, 10 pack$33.33COMMSCOPE Click-On Hangers. For use with AVA5-50 & LDF5-50A 7/8" diameter cable. Pkg of 10. Rec spacing every 4' up to 100mph wind speed,3' up to 150. Learn More
-
Times Microwave Systems - LMR-200 Watertight Flex Cable$1.21The Times Microwave LMR-200-DB direct burial low loss RG58 coaxial cable has the advantage of being watertight. This 3/16 inch 50 Ohm coax cable offers similar performance compared to corrugated copper cable but provides higher flexibility and simplified connectorization. The braided coaxial cable has a 1/2 inch bending radius.The RG58 cable can be used in almost any application where handling characteristics, improved shielding and low loss are required. The LMR-200 cable has a stranded outer conductor and a copper-clad aluminum center conductor. The 100 percent foil shield makes this coax cable low loss.The Times Microwave LMR-200 direct burial low loss RG58 coax cable is available in bulk and is priced per foot. Learn More
-
CommScope - SMA Male 1/4" Superflex$27.24ANDREW SMA Male for 1/4" superflex. Cativated center pin with clamp style body attachment. Learn More
-
CommScope - HoistingGrip 1/2" Cable$15.74COMMSCOPE Hoisting Grip for 1/2" Corrugated Cables. Use at 200ft intervals to raise cable on tower. Can also be used with EW180, EW220 & EW240 waveguides. Learn More
-
CommScope - SSM - StiffArm Mounting Bracket$83.46CommScope Stiff Arm Mounting Bracket. Creates a stiff arm out of a separately ordered 2 3/8"OD pipe. Mounts to 2-3/8" thru 4-1/2" round or angle legs. Learn More
-
CommScope - SSM - Standard Hanger Kit, (EW63 Waveguide)$49.56CommScope Standard Hangers for EW63 hardware not included. Heavy gauge stainless steel. Spacing varies depending on wind speed & cable.10 pack. Learn More
-
CommScope - Hanger Hardware Kit, 3/8",1 Stack$25.69COMMSCOPE Click-On Hanger Hardware Kit for 1/2",5/8" or 7/8" coaxial cable. For use with 1 stack hanger in 3/8" size. Constructed of stainless steel. Learn More
-
CommScope - Grounding Kit 1/2", 2 Hole$31.01COMMSCOPE Grounding Kit for 1/2" diameter cables. Two hole lug for grounding to a tower/ bus bar. Incl 24" grnd cable w/ solid copper strap and weatherproofing. Learn More
-
CommScope - SSM - Jumper Cold Shrink (Antenna to 1/2")$23.55COMMSCOPE 3M (TM) cold shrink weatherproofing Kit. Seals the connection between the direct termination of an antenna & 1/2" jumper. Installs in less than 3 minutes. Learn More
-
Times Microwave -LMR-240-75 1/4" Flex Cable$1.08TIMES MICROWAVE LMR240-75 cable. 1/4" O.D. 75 ohms. Uses LMR240-75 connectors. .75" bending radius. Priced per ft. Learn More
-
CommScope - MiniUHF Male (F1MU) FSJ150A$13.87ANDREW mini UHF male (F1MU) connector for FSJ1-50A, 1/4" superflexible Heliax cable. Captivated silver pin, crimp ferrule. Nickle body. Learn More
-
CommScope - Plain EndPipe 2 3/8 x 63$58.74COMMSCOPE 2 3/8" x 63" Plain end pipe. Hot Dipped Galvanized steel. Learn More
-
Band-it - SSM -Stainless Steel Buckles, (1/2")$96.92BAND-IT Buckles for C204 (Sku 439832) band. Package of 100. Learn More
-
CommScope - NODE ABlank Dummy Module$70.55The Andrew 7574285-00 blank dummy module is for the node A repeater system. This amplifier module fills any unused slot in the repeater. The Andrew dummy BDA module should be used to maintain correct airflow in the subrack. Learn More
-
Times Microwave Systems - 1/2" LMR600 Fire Retardardant, PVC jack$3.22TIMES MICROWAVE Indoor/Outdoor fire- retardant LMR-600 coaxial cable. PVC jacked. Black. CMR rated. Learn More
-
CommScope - 7/8" Easiax Prep Tool AVA5-50, LDF5-50A$39.24Andrew Solutions EASIAX manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including: AVA5, LDF5, and VXL5. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More
-
CommScope - 3/8" & 1/2" Superflex Prep Tool$28.85Andrew EASIAX manual cable preparation tool is made for use with 3/8 inch and 1/2 inch superflex HELIAX coaxial cables, including: FSJ2, FSJ4, ETS2, RXL2 and RXL4. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew EASIAX cable preparation tools. Learn More
-
CommScope - Universal Ground Bar$87.00COMMSCOPE 1/4" x 2-1/2" x 12-1/2" Universal Ground Bar. Made of solid copper with 33 pre-drilled holes. Ideal for all grounding app's incl towers & rooftops. Learn More
-
CommScope - Hanger Hardware Kit, 3/8", 3 Stack$29.79COMMSCOPE Click-On Hanger Hardware Kit for 1/2",5/8" or 7/8" coaxial cable. For use with 3 stack hanger in 3/8" size. Constructed of stainless steel. Learn More
-
Times Microwave Systems - LMR-100A-PVC White Flex Cable$1.11The Times Microwave LMR-100A-PVC-W LMR100 flexible, low loss coaxial cable (white) offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This 50 Ohm coax cable has a stranded outer conductor and copper-clad steel center conductor. The 1/8 inch LMR-100 transmission line has a foil shield and 90 percent coverage braid shield for lower loss. A white PVC jacket adds flexibility and color compatibility for indoor applications. RG174 connectors should be used.The Times LMR-100 flexible, low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
CommScope - Click OnHangers LDF4-50A, 10 pack$27.17COMMSCOPE Click-On Hangers. For use with LDF4-50A 1/2" diameter cable. Package of 10. Recommended spacing every 3' up to 150 mph wind speed, 2'over 150 mph. Learn More
-
CommScope - SSM - 7/8" SnapStak Stackable Hanger$27.36CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More
-
CommScope - CNT400PCoaxial Cable, White jack, Plenum$2.18The Andrew CNT400P braided coaxial cable (white jacket) is similar to RG8 but with lower loss and plenum-rated. This 50 Ohm coax cable has a 90 percent coverage braid shield for low loss. This plenum-rated transmission line offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization with LMR-400 connectors. The braided coax, plenum grade cable can be used in almost any application where handling characteristics, improved shielding and low loss is required. The Andrew WBC-400 plenum-rated, low loss coaxial cable with white jacket is available in bulk and is priced per foot. Learn More
-
CommScope - SnapStak Hangers for 1/2" corrugated cable$25.90SnapStak Hangers for 1/2 in coaxial cable with quadruple stack capability and includes reinforcement bar. Learn More
-
-
-
CommScope - ANDREW Hanger Hardware Kit, 3/8",3 Stack$33.86ANDREW Click-On Hanger Hardware Kit for 1-1/4" or 1-5/8" coaxial cable. For use with 3 stack hanger in 3/8" size. Constructed of stainless steel. Learn More
-
Times Microwave Systems - 1/4" LMR240 Plenum Cable$4.34The Times Microwave LMR-240LL-PL orange plenum-rated low loss LMR-240 coaxial cable is an indoor, fire-retardant cable specifically designed for use in return air handling plenums. This braided coax cable offers similar performance compared to corrugated copper cables but provides high flexibility, simplified connectorization, and weatherproofing. It has a UL/NEC & CSA rating of 'CMP' and 'FT6' respectively. This 50 Ohm coax cable has a solid bare copper center conductor and aluminum taped outer conductor. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. With higher flexibility, the LMR-240 cable has a bending radius of 3/4 inch.The LMR transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The LMR-240 cable is similar in size to RG8X cables.The Times LMR-240 plenum-rated low loss coaxial cable is available in bulk and is priced per foot.This cable requires Times Microwave TC-240 series connectors. Learn More
-
CommScope - 1/2" Corrugated Coax Automated Prep Tool$269.67Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with LDF4-50A HELIAX 1/2 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More
-
CommScope Technologies LLC - 7/8" SnapStak Hanger, Includes Reinforcement Bar$31.37CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction. Quadruple stack capability, includes reinforcement bar. Learn More
-
Times Microwave - Cable Cutting Tool$55.18Times Microwave LMR square cut cable cutter is designed specifically for use on the entire range of LMR cables, from LMR-195 through LMR-600. This cable cutter tool quickly and easily square cuts the LMR cable end making it ready for connector termination. No metallic residue is left, eliminating the need for wire brushing. Safety locking mechanism keeps the tool positively closed until needed or when stored in a pouch. Streamlined designed fits more easily into a Times or other pouch. Times "blue" color replaces the old red color. Learn More
-
CommScope Technologies LLC - ANDREW 10' FSJ4-50 Jumper, DIN Male/DIN Male$125.22ANDREW 10' SureFlex Jumper Consists of FSJ4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER with Sureguard weatherproofing. Learn More
-
Times Microwave - 1m TFT402 Jumper N Male to N Male$75.83Times Microwave 1 meter TFT402 Jumper N Male to N Male. Learn More
-
CommScope - 1/2" Plenum Air Cable, Off White$3.79COMMSCOPE 1/2" Plenum Air 50 ohm cable. HL4RPV-50. Uses LDF4 connectors. Off White.*No automated prep tool available.MCPT-L4 is the prep tool that works. Learn More
-
CommScope - Universal Ground Bar$79.401/4" x 4" x 14" Universal Ground Bar. Made of solid copper with 30 pairs of universal 3/8" hole over 3/8" x 5/8" slot. Wall or tower mount. Learn More
-
CommScope - ANDREW Universal Ground Bar$54.08ANDREW 1/4" x 2" x 10" Universal Ground Bar. Made of solid copper with 10 pairs of universal 3/8" hole over 3/8" x 5/8" slot. Wall or tower mount. Andrew's Universal Ground Bar is competitively priced and offers the mounting flexibility so often needed at sites. This solid copper bar accommodates vertical and 90 degree mounting configurations and provides a central point to collect grounding leads. Learn More
-
CommScope - 1-5/8" Air Cable$33.65The Commscope HELIAX Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacket. Learn More
-
Times Microwave Systems - BNC Male Crimp-LMR200, No Braid Trim Advantage$13.42TIMES No-Braid-Trim Advantage BNC male crimp connector for LMR-200 cable. Silver plated bodies, gold center pin. Solder center pin, crimp on braid (no braid trimming required). Learn More
-
Times Microwave Systems - 3/8" LMR400 Coaxial Cable$1.62The Times Microwave LMR-400 is a low loss braided coaxial cable. This 3/8 inch 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. Learn More
-
CommScope - 138-150 MHz 6/9dB Exposed Dipole Omni Antenna$863.77Andrew DB224-E, 138 - 150 MHz omni exposed dipole antenna. This field adjustable VHF omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has 6 dBd gain and the offset has 9 dBd gain. The Andrew Solutions omni, exposed dipole antenna meets RoHS 202/95/EC. Learn More
-
CommScope - SSM -SureGround Grounding Kit, (1/2")$18.99COMMSCOPE SureGround for 1/2" Al or Cu corrugated or smoothwall coaxial cable. Tinned copper clip with 48" #6 copper bond & field attached, 2 hole lug. Learn More
-
Times Microwave Systems - LMR-400 Prep Tool for virtually all connectors$128.54Times Microwave combination manual cable preparation tool is made for use with 3/8 inch LMR-400 coaxial cable using crimp and clamp-style connectors. This cable hand prep tool joins a cable stripper tool and a cable trimming tool into one easy-to-use devicePrepare LMR-400 coax cable in two simple steps. First, insert the cable into side one, twist, cut, and expose the center conductor. Second, flip the tool around and insert the cable into side two. Twist and turn to expose the coax braid. This cable preparation tool has a built-in deburr tool and works with nearly all LMR-400 connectors. Learn More
-
CommScope - ANDREW 30'FSJ4-50B Jumper PDM/DM$181.37ANDREW 30' SureFlex Jumper. Consists of FSJ4-50B 1/2" superflexible cable with DIN Male on one end and Right Angle DIN Male on the other end. Learn More
-
CommScope - 7/8" RoundCushion 3 Hole$5.78COMMSCOPE stand. port cushion. For 7/8" corrugated cables. Three hole. Learn More
-
Times Microwave -Bulkhead and flange mount Arrestor, N/F$69.15TIMES MICROWAVE 20-1000 MHz general coverage bulkhead and flange mt. 10KA surge. <200uJ throughput energy. Power based on frequency. N female connectors. Learn More
-
CommScope - ANDREW 12' LDF4-50 Low PIM Jumper DM - DM$41.12The Andrew L4A-DMDM-12-P SureFlex cable assembly process uses a 12 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 12 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
CommScope - ANDREW 15'FSJ4-50B Jumper PDM/DM$128.74ANDREW 15' SureFlex Jumper. Consists of FSJ4-50B 1/2" superflexible cable with DIN Male on one end and Right Angle DIN Male on the other end. Learn More
-
CommScope - 7/8" Grounding Kit Prep Tool$268.06ANDREW Aluminum Grounding Kit Preparation Tool for 7/8" corrugated cable SG series grounding kits Learn More
-
CommScope - SureGround Grounding Kit,1-1/4", 2 Hole Lug$22.63COMMSCOPE SureGround for 1-1/4" copper or aluminum, smooth or corrugated cable w/ 48" lead, unattached universal lug and weatherproofing. Learn More
-
CommScope - 164-174 MHz 6/9dB Exposed Dipole Omni Antenna$855.28Andrew DB224-C covers the 164 - 174 MHz omni, exposed dipole antenna. This field adjustable VHF omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has a 6 dBd gain and the offset has 9 dBd gain. The Andrew Solutions omni, exposed dipole antenna meets RoHS 2002/95/EC. Learn More
-
CommScope - U-Bolt for2-3/8" Pipe$3.45COMMSCOPE Galvanized U Bolt for 2-3/8" pipe. Size 3/8" diameter, 2-1/2" throat, 4" length, 2" thread. Comes with nuts and lock washers. Learn More
-
Times Microwave -DC-3.0 GHz Replacement Gas Tube Lightning Arrestor$73.20TIMES MICROWAVE DC to 3.0 GHZ gas tube lightning arrestor. Passes up to +/- 90 VDC, 20A max. Bi-directional. Bulkhead mount. N/F Ant.-N/M Equip. Learn More
-
CommScope - NODE A2/A4Outdoor Wall Mount$226.95The Andrew 7597821 indoor wall mounting kit is for both node A2 and node A4 chassis. Additional mounting kits are available for outdoor wall mounting and outdoor pole mounting. Learn More
-
CommScope - 7/8" RoundCushion 1 Hole$5.78COMMSCOPE stand. port cushion. For 7/8" corrugated cables. One hole. Learn More
-
CommScope - 1/2" RoundCushion 2 Hole$5.78COMMSCOPE stand. port cushion. For 1/2" corrugated cables. Two hole. Learn More
-
Times Microwave -.680-2.2 GHz DC Blocked Arrestor, NF/NF$96.77TIMES MICROWAVE .680-2.2 GHz DC Blocked Arrestor. N/F on antenna port, N/F on equipment port. Solid brass. Learn More
-
CommScope - 1-1/4" Hanger Grommet for 5/8" Cable, 10 Pack$36.03COMMSCOPE 1-1/4" Hanger Grommet for 5/8" Cable, 10 Pack For use 1-1/4" snap-in hangers, clip style hangers, or standard hanger kits. Learn More
-
Times Microwave Systems - 7/16 DIN Female-LMR400$76.00TIMES 7/16 DIN female connector for LMR400 coaxial cable. Solder center pin, clamp on braid. Learn More
-
CommScope - 450-470 MHz 9.2dBd Exposed Dipole Omni Antenna$1,984.35Andrew DB420-B omnidirectional, exposed dipole antenna operates in the 450 - 470 MHz frequency range. This UHF omni dipole antenna is 9.2 dBd gain, can handle up to 250 watts and is terminated with an N male connector at the end of a flexible lead. Included wit the antenna is a DB356-OS pipe mount lit for 1.25 - 3.5 inch OD round members. Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations and is extremely rugged. This antenna meets RoHS 2002/95/EC.
Additional shipping charges may apply- ships freight only. Learn More -
CommScope - 806-869 MHz 10dB 7 Element Yagi Antenna$384.28Andrew DB499-A is a heavy duty yagi antenna operating in the 806 - 869 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More
-
CommScope - 450-470 MHz 9dB Exposed Dipole Omni Antenna$622.32Andrew DB411-B quasi omnidirectional, exposed dipole antenna operates in the 450 - 470 MHz frequency range. The 9 dB gain antenna can handle up to 250 watts. This UHF dipole antenna is terminated with an N male connector at the end of a flexible lead. Included with the antenna is a DB365-OS pipe mounting kit for 1.25 - 3.5 inch OD round members. The Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations. The DB411 is extremely rugged and is moisture resistant. The antenna meets RoHS 2002/95/EC. Learn More
-
CommScope - ANDREW 15' LDF4-50 Low PIM Jumper DM - DM$42.55The Andrew L4A-DMDM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
CommScope - 1/2" Grounding Kit Prep Tool, Aluminum$260.32ANDREW 1/2" Aluminum Ground Kit Strip Tool for LDF4-50 foam cable. Manually operated for SG Series. Learn More
-
CommScope - ANDREW 3' LDF4-50 Low PIM Jumper NM - NM$75.33The Andrew L4A-NMNM-3-P SureFlex cable assembly process uses a 3 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 3 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
CommScope - ANDREW 20' LDF4-50 Jumper, DIN Male/DIN Male$50.49ANDREW 20' SureFlex Jumper Consists of LDF4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER. Learn More
-
CommScope - ANDREW 30'LDF4-50 Low PIM Jumper DM - DM$62.20The Andrew L4A-DMDM-30-P SureFlex cable assembly process uses a 30 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 30 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
-
CommScope - 1/2" Automated Prep Tool$269.60COMMSCOPE EASIAX Plus Automated Cable Preparation Tool for 1/2" coaxial cable. Learn More
-
Times Microwave Systems - LMR-240 Flex Cable$1.10The Times Microwave LMR240 low loss LMR-240 coaxial cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. This 50 Ohm coax cable has a solid bare copper center conductor and stranded outer conductor that results in a 3/4 inch bending radius. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. The LMR-240 transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The LMR-240 cable is similar in size to RG8X cables and fits LMR-240 connectors.The Times LMR-240 low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
57 VDC rectifier module for the ION-E system$1,416.2557 VDC rectifier module for the ION-E system Learn More
-
Manual Cable Preparation Tool for 7/8 in coaxial$161.47Manual Cable Preparation Tool for 7/8 in coaxial Learn More
-
-
Copper Ground Buss Bar, 1/4 in x 4 in x 24 in$213.71Copper Ground Buss Bar, 1/4 in x 4 in x 24 in Learn More
-
-
COMMSCOPE Hoist Grip 1-1/4 LDF6-50 Heliax Cable"$39.63COMMSCOPE Hoist Grip 1-1/4 LDF6-50 Heliax Cable" Learn More
-
-
2RU Fiber Patch Panel with Removable Lid$454.342RU Fiber Patch Panel with Removable Lid Learn More
-
-
30' LDF4-50A Jumper 7/16 DIN(M) - 7/16 DIN(M) R/A$74.9530' LDF4-50A Jumper 7/16 DIN(M) - 7/16 DIN(M) R/A Learn More
-
-
-
-
-
-
-
-
-
-
UAP, 10G, Expansion Port, Integrated Antenna$2,565.28UAP, 10G, Expansion Port, Integrated Antenna Learn More
-
3/8 Low Loss Low Passive Intermod Coax In/Outdoor"$14.803/8 Low Loss Low Passive Intermod Coax In/Outdoor" Learn More
-
CommScope - 1/2" Fire-retardant Radiating Cable$4.91COMMSCOPE 1/2" radiating mode cable with fire -retardant, halogen free polyolefin jacket. Learn More
-
-
6' D-CLASS LDF4-50 4.3-10 Male to 4.3-10 Male$52.786' D-CLASS LDF4-50 4.3-10 Male to 4.3-10 Male Learn More
-
-
-
-
GigaSPEED Modular Patch Cord, Blue Jacket, 2M$26.80GigaSPEED Modular Patch Cord, Blue Jacket, 2M Learn More
-
15' Hybrid Fiber Tails SM 1 x 1, 2 Fiber-6-OVP Box$163.6515' Hybrid Fiber Tails SM 1 x 1, 2 Fiber-6-OVP Box Learn More
-
-
ANDREW 30' LDF4-50, DIN Male/DIN Male, Sureguard$77.00ANDREW 30' LDF4-50, DIN Male/DIN Male, Sureguard Learn More
-