All Products

LARSEN 450-470 MHz directional yagi antenna. 5 elem., 9dBd gain, 300 watts. Welded in black finish.N-female termination. Includes mounting hardware. Learn More

LMR-195 and LMR-200 Cable Prep Tool Learn More

TIMES TNC Male Right Angle Crimp connector for LMR-400 coaxial cable. Nickel body, Silver center pin. Teflon dielectric. DOES NOT WORK ON 400-UF. Learn More

TIMES Mini-UHF male crimp connector for LMR- 200 cable. Silver plated bodies, gold center pin. Solder center pin, Crimp on braid. Learn More

The Larsen NMOKNOCONN vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58A/U cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

LARSEN rain cap for NMO mount. Black only. Learn More

The Times Microwave LMR-600 1/2 inch standard coax cable with foam dielectric has a UV-resistant Polyethylene jacket for outdoor use. The Times Microwave LMR-600 1/2 inch foam coaxial cable is available in bulk and is priced per foot. Learn More

The Times Microwave LMR-200 low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. available in bulk and sold per foot. Learn More

The Larsen NMOKUD vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58/U dual shield cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

The Larsen NMO150B base-loaded 5/8 wave antenna only (black) operates within the VHF frequency range, 144-174 MHz. This vehicle antenna delivers high performance, with a gain of 3 dB (with ground plane). Maximum power input is 200 watts. The 49 inch whip antenna is field-tunable. Order NMO mount for your Larsen VHF mobile antenna separately. Learn More

TIMES MICROWAVE 20-1000 MHz general coverage bulkhead and flange mt. 10KA surge. <200uJ throughput energy. N/F connectors. IP67 weatherized. Learn More

LARSEN 27-30 MHz NMO black loading coil only. Learn More

The Larsen NMOMMRPL magnetic antenna mount is for use with Motorola-style, NMO mobile antennas. This Motorola-style magnet mount provides temporary, easily removable vehicle mounting for mobile antennas. This high frequency 0-3000 MHz NMO mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna mount is constructed from a zinc alloy body plated with copper and nickel that is black coated. The magnetic base has a protective coating that prevents damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style antennas includes 12 feet of RG58A/U cable. UHF male connector is installed. Learn More

TIMES MICROWAVE DC - 2.5 GHz 3/8" LMR400-75 coax cable. 75 ohm. Lower loss than RG11. Uses LMR400-75 connectors only. Learn More

The Larsen NMOMMRDSSMA vehicle antenna magnetic mount is for use with Motorola-style, NMO mobile antennas. This Motorola-style magnet mount provides temporary, easily removable mounts for mobile antennas. This high frequency 0-3000 MHz NMO mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna mount is constructed from a zinc alloy body plated with copper and nickel. The magnetic base has a protective coating that prevents damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style mobile antennas includes 12 feet of RG58A/U dual shield cable. SMA male connector is installed. Learn More

TIMES MICROWAVE DC - 2.5 GHz 1/2" LMR600-75 coax cable. 75 ohm. Lower loss than RG11. Uses LMR600-75 connectors only. Learn More

TIMES reverse polarity TNC male (Female) for LMR400 coaxial cable. Meets FCC specs for use with Spread Spectrum technology. Crimp type. DOES NOT WORK WI Learn More

LARSEN trunk gutter mount for use with NMO antennas. Stainless steel "L" bracket fastens with three screws. Includes 17'RG-58/U cable & connector. Learn More

The Larsen NMO150BK base-loaded VHF mobile antenna operates within the frequency range, 144-174 MHz. This 51.5 inch whip antenna features a gain of 3 dBd. The vehicle antenna includes a 3/4 inch hole mount, 17 feet of RG58A/U cable and a loose UHF male connector for vehicle installation. Learn More

TIMES TNC male Advantage connector for LMR-400. Gold pin. Silver plate body, gold center pin. No braid trim. Learn More

TIMES MICROWAVE All-In-One Combination Prep Tool for prep of LMR240 cables for crimp or clamp connectors. Learn More

LARSEN 800-866 MHz NMO collinear mobile antenna. 3.4dB gain, 200 watts. Order Motorola style mount separately. Black. Learn More

LARSEN 40-50 MHz NMO black loading coil only. Learn More

Larsen YA6800W yagi directional antenna is designed for high performance and long life in the most demanding applications. Larsen's black-finished welded yagi directional antenna is a 4-element antenna with 8 dBi directional gain and operates within a frequency range of 806 - 866 MHz. The maximum power input is 300 watts and the antenna is terminated with an N Female connector. The convenient U-bolt mounting hardware for pipes up to 2 inch makes installation easy and are included.This yagi antenna uses a rugged, fully-welded design that is strengthened by aluminum alloys and completely weatherized. Learn More

LARSEN 0-3000 MHz NMO magnet mount. Includes 12' RG58A/U cable and installed BNC connector. Learn More

The Times Microwave LMR-200-DB direct burial low loss RG58 coaxial cable has the advantage of being watertight. This 3/16 inch 50 Ohm coax cable offers similar performance compared to corrugated copper cable but provides higher flexibility and simplified connectorization. The braided coaxial cable has a 1/2 inch bending radius.The RG58 cable can be used in almost any application where handling characteristics, improved shielding and low loss are required. The LMR-200 cable has a stranded outer conductor and a copper-clad aluminum center conductor. The 100 percent foil shield makes this coax cable low loss.The Times Microwave LMR-200 direct burial low loss RG58 coax cable is available in bulk and is priced per foot. Learn More

TIMES MICROWAVE LMR240-75 cable. 1/4" O.D. 75 ohms. Uses LMR240-75 connectors. .75" bending radius. Priced per ft. Learn More

The Larsen NMOMMRMPL vehicle antenna magnetic mounti for use with Motorola-style mobile antennas. This Motorola-style magnet mount provides temporary, easily removable vehicle mounting for mobile antennas. This high frequency 0-3000 MHz magnet mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna vehicle mount is constructed from a zinc alloy body plated with copper and nickel that is black coated. The magnetic base has a protective coating designed to prevent damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style antennas includes 12 feet of RG58A/U cable. Mini UHF male connector is installed. Learn More

BUD INDUSTRIES Air and Moisture Vent. Style B. All plastic construction. Includes housing, gasket and locking nut. Light Gray. Learn More

TIMES MICROWAVE Indoor/Outdoor fire- retardant LMR-600 coaxial cable. PVC jacked. Black. CMR rated. Learn More

The Times Microwave LMR-100A-PVC-W LMR100 flexible, low loss coaxial cable (white) offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This 50 Ohm coax cable has a stranded outer conductor and copper-clad steel center conductor. The 1/8 inch LMR-100 transmission line has a foil shield and 90 percent coverage braid shield for lower loss. A white PVC jacket adds flexibility and color compatibility for indoor applications. RG174 connectors should be used.The Times LMR-100 flexible, low loss coaxial cable is available in bulk and is priced per foot. Learn More

LARSEN 136-512 MHz NMO quarter wave mobile antenna only. Order desired NMO 3/4" mount separately. Learn More

LARSEN 40-50 MHz 200 watt base loaded unity gain 1/4 wave chrome mobile antenna. Purchase Motorola style mount separately. Learn More

Larsen YA5900W yagi directional antenna is designed for high performance and long life in the most demanding applications. Larsen's black-finished welded yagi directional antenna is a 7-element antenna with 11 dBi directional gain and operates within a frequency range 890 - 960 MHz. The maximum power input is 300 watts and the antennas is terminated with an N Female connector. Stainless steel U-bolt mounting hardware for pipes up to 1-5/8 inch is included and makes installation easy.This yagi antenna uses a rugged, fully-welded design that is strengthened by aluminum alloys and completely weatherized. Learn More

LARSEN UHF coil. Use with appropriate whip for desired frequency. Black finish to match Kulrod T(TM) whips. Learn More

LARSEN UHF male solder Female and UG175 adaptor for use on RG55, 58, 141 and 142 cables. Learn More

The Larsen NMOKMPL vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58/U cable and no connector. Thread size is 1 1/8 inch - 18. Learn More

Motorola-style magnet bases provide temporary, easily removable mounts for antennas. Thread size 1-1/8"-18. Learn More

The Times Microwave LMR-240LL-PL orange plenum-rated low loss LMR-240 coaxial cable is an indoor, fire-retardant cable specifically designed for use in return air handling plenums. This braided coax cable offers similar performance compared to corrugated copper cables but provides high flexibility, simplified connectorization, and weatherproofing. It has a UL/NEC & CSA rating of 'CMP' and 'FT6' respectively. This 50 Ohm coax cable has a solid bare copper center conductor and aluminum taped outer conductor. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. With higher flexibility, the LMR-240 cable has a bending radius of 3/4 inch.The LMR transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The LMR-240 cable is similar in size to RG8X cables.The Times LMR-240 plenum-rated low loss coaxial cable is available in bulk and is priced per foot.This cable requires Times Microwave TC-240 series connectors. Learn More

Times Microwave LMR square cut cable cutter is designed specifically for use on the entire range of LMR cables, from LMR-195 through LMR-600. This cable cutter tool quickly and easily square cuts the LMR cable end making it ready for connector termination. No metallic residue is left, eliminating the need for wire brushing. Safety locking mechanism keeps the tool positively closed until needed or when stored in a pouch. Streamlined designed fits more easily into a Times or other pouch. Times "blue" color replaces the old red color. Learn More

Times Microwave 1 meter TFT402 Jumper N Male to N Male. Learn More

TIMES No-Braid-Trim Advantage BNC male crimp connector for LMR-200 cable. Silver plated bodies, gold center pin. Solder center pin, crimp on braid (no braid trimming required). Learn More

The Times Microwave LMR-400 is a low loss braided coaxial cable. This 3/8 inch 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. Learn More

Times Microwave combination manual cable preparation tool is made for use with 3/8 inch LMR-400 coaxial cable using crimp and clamp-style connectors. This cable hand prep tool joins a cable stripper tool and a cable trimming tool into one easy-to-use devicePrepare LMR-400 coax cable in two simple steps. First, insert the cable into side one, twist, cut, and expose the center conductor. Second, flip the tool around and insert the cable into side two. Twist and turn to expose the coax braid. This cable preparation tool has a built-in deburr tool and works with nearly all LMR-400 connectors. Learn More

TIMES MICROWAVE 20-1000 MHz general coverage bulkhead and flange mt. 10KA surge. <200uJ throughput energy. Power based on frequency. N female connectors. Learn More

LARSEN 698-960/1710-2700 MHz Shadow Low Profile Transit antenna. NMO mountable. 2 dBi gain, Black color. Requires an NMOHF (high frequency) mount. Learn More

LARSEN 144-174 MHz NMO black loading coil only. Requires 19616 whip and NMO mount. Learn More

The Larsen NMO150C base-loaded 5/8 wave antenna only operates within the VHF frequency range, 144-174 MHz. This vehicle antenna delivers high performance, with a gain of 3 dB (with ground plane). Maximum power input is 200 watts. The 49 inch whip antenna is field-tunable and includes a black coil with chrome whip. Order NMO mount for your Larsen VHF mobile antenna separately. Learn More

LARSEN 806-896 MHz quarter wave chrome pre-tuned antenna. Order NMO/ Motorola style mount separately. Learn More

LARSEN FME male to SMA male adapter. Learn More

The Larsen NMOKMPL vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58A/U cable and mini UHF connector. Thread size is 1 1/8 inch - 18. Learn More

LARSEN 0-3000 MHz magnet mount. Includes 12' RG58A/U and FME connector 3 1/4" in size and motorola style mount. Learn More

TIMES MICROWAVE DC to 3.0 GHZ gas tube lightning arrestor. Passes up to +/- 90 VDC, 20A max. Bi-directional. Bulkhead mount. N/F Ant.-N/M Equip. Learn More

TIMES MICROWAVE .680-2.2 GHz DC Blocked Arrestor. N/F on antenna port, N/F on equipment port. Solid brass. Learn More

TIMES 7/16 DIN female connector for LMR400 coaxial cable. Solder center pin, clamp on braid. Learn More

LARSEN rubber gasket for NMO coils. 3 per package. Learn More

LARSEN 806-960 MHz Mirage low profile unity gain antenna. 100 watts. White. Order Motorola/NMO style mount and cable separately. Learn More

LARSEN 806-896 MHz 3dB on glass antenna. Enclosed coil whip. Black finish. Includes 14' dual shield RG58 cable and Mini-UHF male connector. Learn More

LARSEN test mount adapter. Checks antenna feedline and radio at the same time. Screws onto NMO/Motorola style mount. UHF female connection. Learn More

LARSEN 150-170 MHz wide band quarter wave black antenna with spring. Order Motorola style mount separately. Learn More

LARSEN 450-470 MHz NMO 200 watt 3.4dB gain collinear mobile antenna only. Order desired NMO mount separately. Learn More

LARSEN FME male to N male adapter. Learn More

LARSEN 3-5V 26dB GPS antenna with NMO for any NMO antenna in 27-6000MHz range. Direct mount 3/4" hole. Includes 17' RG174 (GPS) and 17' RG58 (NMO). No conn Learn More

The Times Microwave LMR240 low loss LMR-240 coaxial cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. This 50 Ohm coax cable has a solid bare copper center conductor and stranded outer conductor that results in a 3/4 inch bending radius. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. The LMR-240 transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The LMR-240 cable is similar in size to RG8X cables and fits LMR-240 connectors.The Times LMR-240 low loss coaxial cable is available in bulk and is priced per foot. Learn More

7-16 DIN Female to N Male, 50 Ohm Learn More

Crimping tool for LMR-600 connectors Learn More

TNC Male Crimp for LMR400 Cable Learn More

BNC Male (plug) crimp connector Learn More

132-850 1/4 Wave Antenna w/ Spring, Black Learn More

Learn More

Learn More

3/8 Low Loss Low Passive Intermod Coax In/Outdoor" Learn More

Learn More

LARSEN Mini-UHF Male Crimp connector for RG58/U cable. Nickle finish. Teflon insulation. 50 ohm impedance. Learn More

LARSEN Super seal gasket for NMO mount. 3 per package. Learn More

7-16 DIN Male - N female Low Pim Adaptor Learn More

LARSEN 152-162 MHz unity gain 1/4 wave chrome pre-tuned antenna. Order NMO/ Motorola style mount separately. Learn More

LARSEN FME male to UHF male adapter. Learn More