Pro Telecom Supply is a leading supplier of Commercial and Industrial Communications products. We carry the parts and equipment you need to complete your project on time and affordably. Our partnerships with the leading vendors in telecommunications gives you access to some of the worlds best technology products. Whether you are completing an RF project, or need components for your mobile workforce, Pro Telecom Supply has you covered.
All Products
-
Ventev - 10' TWS240 Jumper NM - NM$24.43WIRELESS SOLUTIONS 10' TWS-240 Antenna extension cable with N-Style Plug (M) to N-Style Plug (M). Includes heat shrink. Learn More
-
Times Microwave Systems - LMR-195 and LMR-200 Cable Prep Tool$135.50LMR-195 and LMR-200 Cable Prep Tool Learn More
-
Times Microwave Systems - TNC Male Right Angle Crimp-LMR400$21.52TIMES TNC Male Right Angle Crimp connector for LMR-400 coaxial cable. Nickel body, Silver center pin. Teflon dielectric. DOES NOT WORK ON 400-UF. Learn More
-
Times Microwave Systems - Mini-UHF Male -LMR200$4.09TIMES Mini-UHF male crimp connector for LMR- 200 cable. Silver plated bodies, gold center pin. Solder center pin, Crimp on braid. Learn More
-
Times Microwave Systems - LMR-600 1/2" Foam Cable$2.98The Times Microwave LMR-600 1/2 inch standard coax cable with foam dielectric has a UV-resistant Polyethylene jacket for outdoor use. The Times Microwave LMR-600 1/2 inch foam coaxial cable is available in bulk and is priced per foot. Learn More
-
Times Microwave Systems - LMR-200 Flex Cable$1.02The Times Microwave LMR-200 low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. available in bulk and sold per foot. Learn More
-
Times Microwave -Bulkhead and flange mount Arrestor, N/F$77.23TIMES MICROWAVE 20-1000 MHz general coverage bulkhead and flange mt. 10KA surge. <200uJ throughput energy. N/F connectors. IP67 weatherized. Learn More
-
Ventev - 3' RG142P Jumper NM - SMAM$42.34The Wireless Solutions RG142PNMSM-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with a nickel-plated N male (372528) connector and a SMA male (49275) connector. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Times Microwave Systems - LMR400-75 3/8" Coaxial Cable$1.61TIMES MICROWAVE DC - 2.5 GHz 3/8" LMR400-75 coax cable. 75 ohm. Lower loss than RG11. Uses LMR400-75 connectors only. Learn More
-
Ventev - 3' TWS195 Jumper NM - SMAM$23.40The TerraWave 195-07-18-P3' cable assembly connects an N-style plug to a SMA plug. This jumper assembly uses 3 feet of TWS-195 antenna extension cable. One end of the coax cable has an N Male (Male center pin) and the other a SMA Male (Male center pin).The TerraWave 3 foot cable jumper assembly includes heat shrink. Learn More
-
TerraWave - TWS-195Coaxial Braided Cable$0.65The TerraWave TWS-195 low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This low loss 50 Ohm coax cable features a foil shield and 90 percent braided shield. It has a polyethylene, gas-injected UV-resistant jacket. The low loss transmission line can be used in almost any application where handling characteristics, improved shield and low loss is required. The low loss coax cable has a comparable performance to RG142 cable and uses RG58 or RG142 connectors. The TerraWave TWS-195 low loss coax cable is available in bulk and is priced per foot. Learn More
-
Ventev - 10' TWS400 Jumper NM - NM$34.23The TerraWave 400-07-07-P10' coaxial cable assembly uses 10 feet of TWS-400 antenna extension cable. This cable jumper assembly connects a N-style Male (Male center pin) connectors to both ends.The TerraWave 10 foot coax cable assembly includes heat shrink. Learn More
-
Wireless Solutions - 6'LMR400 Jumper NM - NF$46.84The Wireless Solutions LMR400NMNF-6 coaxial cable assembly uses 6 feet of LMR-400 cable. This cable jumper assembly is fitted with an N female (44728) connector and an N male (14515) connector. The crimp connectors include heat shrink. This Wireless Solutions 6 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 3' RG142P Jumper NM - BNCM$38.41The Wireless Solutions RG142PNMBM-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and a BNC male connector. The crimp connectors include heat shrink.This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 2' RG142P Jumper NM - NM$28.03The Wireless Solutions RG142PNMNM-2 coaxial cable assembly uses 2 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 2 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
TerraWave - 3/8"TWS-400DB Direct Burial$1.43The TerraWave TWS-400DB direct burial coaxial cable contains a weatherproofing compound around the foil and braid allowing for continuous performance even if cable has sustained damage. The 3/8 inch 50 Ohm coax cable has a solid center conductor and UV-resistant jacket. This braided cable allows for a 1 inch bending radius for applications requiring greater flexibility. The TerraWave direct burial low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
TerraWave - TWS-195FR50 Ohm Coaxial Braided Cable$0.78The TerraWave TWS-195FR-M coaxial cable (black) features a non-halogen, low smoke, fire-retardant cable designed for in-building applications. The TWS-195 cable is MSHA approved for mining operations. This low loss 50 Ohm coax cable features a 90 percent braided shield. The TWS-195 transmission line can be used in almost any application where handling characteristics, improved shield and low loss is required. The fire-retardant low loss coax cable has a comparable performance to RG142 cable and uses RG58 connectors. The TerraWave fire-retardant TWS-195 low loss coax cable is available in bulk and priced per foot. Learn More
-
Ventev - 5' LMR400 Jumper NM - NM$45.60The Wireless Solutions LMR400NMNM-5 coaxial cable assembly uses 5 feet of LMR-400 cable. This cable jumper assembly is fitted with N male (14515) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 5 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Wireless Solutions - 2'TWS400 Jumper NM - NM$22.67WIRELESS SOLUTIONS 2' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
Ventev - 20' TWS400 Jumper NM - NM$47.86The TerraWave 400-07-07-P20' coaxial cable assembly uses 20 feet of TWS-400 antenna extension cable. This cable jumper assembly connects N-style male (Male center pin) connectors to both ends.The TerraWave 20 foot coax cable assembly includes heat shrink. Learn More
-
Times Microwave Systems - LMR600-75 1/2" Coaxial Cable$2.90TIMES MICROWAVE DC - 2.5 GHz 1/2" LMR600-75 coax cable. 75 ohm. Lower loss than RG11. Uses LMR600-75 connectors only. Learn More
-
Ventev - 3' RG142P Jumper NM - NF$33.65The Wireless Solutions RG142PNMNF-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and an N female connector. The crimp connectors include heat shrink. This Wireless Solutions cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Times Microwave Systems - Rev. Pol TNC Male LMR400$25.06TIMES reverse polarity TNC male (Female) for LMR400 coaxial cable. Meets FCC specs for use with Spread Spectrum technology. Crimp type. DOES NOT WORK WI Learn More
-
Ventev - 1' RG58 Jumper NF - Mini-UHFM$29.41WIRELESS SOLUTIONS 1' RG58 Jumper. Made of RG58 with N Female (83032) on one end and Mini UHF Male (43139) on the other. Learn More
-
Ventev - 3' LMR400UF Jumper NM - NM$44.46WIRELESS SOLUTIONS 3' LMR400UF Jumper. Made of LMR400UF with N Male (14515) on each end. Learn More
-
Ventev - 2' TWS195 Jumper NF(B) - SMAM$25.40WIRELESS Solutions 2' TWS-195 Antenna extension cable with N-Style Bulkhead Jack (F) to SMA Female (M). Includes heat shrink. Learn More
-
Ventev - 3' Jumper-SCF12 NM-NF$95.54tessco Jumper Assembly. 3' long. Made of Cablewave SCF12-50J 1/2" Superflexible cable. N Male omni fit connector on one end and omni fit N Female on the other. Learn More
-
3/8" 400 Series 50 Ohm Coax Cable$1.15TWS-400 braided coaxial cable is low loss. This 3/8 inch 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. Generic for LMR-400 Learn More
-
Ventev - 1/2" TWS-600 50 Ohm Coaxial Braided Cable$2.10The Ventev TWS-600 1/2 inch standard braided coax cable with foam dielectric has a UV-resistant polyethylene jacket for outdoor use. This low loss 50 Ohm coax cable is designed with a stranded outer conductor with a copper-clad aluminum center conductor. Maximum frequency capacity is 10.3 GHz. The Ventev 1/2 inch braided coaxial cable is available in bulk and is priced per foot. Learn More
-
Ventev - 6' TWS400 Jumper NM - NM$30.79The TerraWave 400-07-07-P6' cable assembly connects an N-style plug to a SMA plug. This jumper assembly uses 6 feet of TWS-400 antenna extension coaxial cable. This coax cable has N Male (Male center pin) connectors installed on both ends.The TerraWave 6 foot cable jumper assembly includes heat shrink. Learn More
-
Ventev - 1' TWS195 Jumper NM - NM$17.88WIRELESS Solutions 12" TWS-195 Antenna extension cable with N Plug (M center pin) to N Plug (M center pin). Includes heat shrink. Learn More
-
Times Microwave Systems - TNC Male Hex/Knurl Combo No Braid Trim LMR400$12.40TIMES TNC male Advantage connector for LMR-400. Gold pin. Silver plate body, gold center pin. No braid trim. Learn More
-
TerraWave - LMR 100 type 50 Ohm Coaxial Cable$0.57 As low as $0.50The TerraWave TWS-100 braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. Learn More
-
TerraWave - TWS-200Coax Cable$0.61The TerraWave TWS-200 flexible low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This low loss50 Ohm coax cable features a 90 percent coverage shield. It has a solid copper center conductor, stranded outer conductor, and polyethylene foam insulation. The transmission line features a PVC jacket with un-bounded aluminum tape allowing end stripping with automated cable prep tools. While designed for mobile antenna applications, it can be used in almost any application where handling characteristics, improved shield and low loss is required. The low loss coax cable has a comparable performance to RG142 cable and uses RG58 or RG142 connectors. The TerraWave TWS-200 low loss coax cable is available in bulk and sold per foot. Learn More
-
Ventev - 2' TWS195 Jumper NM - SMAM$22.96The TerraWave 195-07-18-P2' coaxial cable assembly uses 2 feet of TWS-195 antenna extension cable. This cable jumper assembly connects an N-style male (Male center pin) to a SMA Male (Male center pin).The TerraWave 2 foot coax cable assembly includes heat shrink. Learn More
-
Ventev - 2' TWS195 Jumper RPTNCF - RPTNCM$25.42The TerraWave 195-01-02-P2' coaxial cable assembly uses 2 feet of TWS-195 antenna extension coax cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC Female (Male center pin).The TerraWave 2 foot coax cable assembly includes heat shrink. Learn More
-
Ventev - 3' LMR240 Jumper NM - SMAM$33.87WIRELESS SOLUTIONS 3' LMR240 Jumper. Made of LMR240 with N Male (54919) on one end and SMA Male (55222) on the other end. Learn More
-
Ventev - 15' TWS400 Jumper RPTNCF - RPTNCM$36.84WIRELESS 15' TWS-400 Antenna extension cable with RPTNC Female (F center pin) to RPTNC Jack (M center pin). Includes heat shrink. Learn More
-
Times Microwave Systems - LMR-240 Prep Tool for virtually all connectors$132.21TIMES MICROWAVE All-In-One Combination Prep Tool for prep of LMR240 cables for crimp or clamp connectors. Learn More
-
Ventev - 18" TWS100 Jumper NF(B) - NM$27.75WIRELESS SOLUTIONS 18" TWS-100 Antenna extension cable with N Bulkhead Female (F center pin) to N Plug (M Center pin). Includes heat shrink. Learn More
-
Ventev - 3' RG142P Jumper NM - TNCM$36.22The Wireless Solutions RG142PNMTM-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double shielded cable. This cable jumper assembly is fitted with an N male connector and a TNC male connector. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Wireless Solutions - 6'LMR400 Jumper NM - NM$47.69The Wireless Solutions LMR400NMNM-6 coaxial cable assembly uses 6 feet of LMR-400 cable. This cable jumper assembly is fitted with N male (14515) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 6 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Times Microwave Systems - LMR-200 Watertight Flex Cable$1.21The Times Microwave LMR-200-DB direct burial low loss RG58 coaxial cable has the advantage of being watertight. This 3/16 inch 50 Ohm coax cable offers similar performance compared to corrugated copper cable but provides higher flexibility and simplified connectorization. The braided coaxial cable has a 1/2 inch bending radius.The RG58 cable can be used in almost any application where handling characteristics, improved shielding and low loss are required. The LMR-200 cable has a stranded outer conductor and a copper-clad aluminum center conductor. The 100 percent foil shield makes this coax cable low loss.The Times Microwave LMR-200 direct burial low loss RG58 coax cable is available in bulk and is priced per foot. Learn More
-
Ventev - 3' RG142P Jumper BNCM - BNCM$72.51WIRELESS SOLUTIONS 3' jumper w/ double shielded RG142P cable. 3' long with an crimp BNC males on each end. Learn More
-
Ventev - 10' LMR400 Jumper NM - NM$56.06The Wireless Solutions LMR400NMNM-10 coaxial cable assembly uses 10 feet of LMR-400 cable. This cable jumper assembly is fitted with N male (330822) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 10 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Times Microwave -LMR-240-75 1/4" Flex Cable$1.08TIMES MICROWAVE LMR240-75 cable. 1/4" O.D. 75 ohms. Uses LMR240-75 connectors. .75" bending radius. Priced per ft. Learn More
-
Ventev - 2' RG142P Jumper NM - BNCM$30.74The Wireless Solutions RG142PNMBM-2 coaxial cable assembly uses 2 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and a BNC male connector. The crimp connectors include heat shrink. This Wireless Solutions 2 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 3' TWS195 Jumper NM - RPSMAM$9.83WIRELESS Solutions 3' TWS-195 Antenna extension cable with N Female (M Center Pin) to RPSMA Female (F center pin). Includes heat shrink. Learn More
-
Times Microwave Systems - 1/2" LMR600 Fire Retardardant, PVC jack$3.22TIMES MICROWAVE Indoor/Outdoor fire- retardant LMR-600 coaxial cable. PVC jacked. Black. CMR rated. Learn More
-
Times Microwave Systems - LMR-100A-PVC White Flex Cable$1.11The Times Microwave LMR-100A-PVC-W LMR100 flexible, low loss coaxial cable (white) offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This 50 Ohm coax cable has a stranded outer conductor and copper-clad steel center conductor. The 1/8 inch LMR-100 transmission line has a foil shield and 90 percent coverage braid shield for lower loss. A white PVC jacket adds flexibility and color compatibility for indoor applications. RG174 connectors should be used.The Times LMR-100 flexible, low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
Ventev - 18" TWS100 Jumper RPTNCF(B) - RPTNCM$11.22The TerraWave 100-02-03-P18" coaxial cable assembly uses 18 inches of TWS-100 antenna extension cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC bulkhead Female (Male center pin).The TerraWave 18 inch coax cable assembly includes heat shrink. Learn More
-
Times Microwave Systems - 1/4" LMR240 Plenum Cable$4.34The Times Microwave LMR-240LL-PL orange plenum-rated low loss LMR-240 coaxial cable is an indoor, fire-retardant cable specifically designed for use in return air handling plenums. This braided coax cable offers similar performance compared to corrugated copper cables but provides high flexibility, simplified connectorization, and weatherproofing. It has a UL/NEC & CSA rating of 'CMP' and 'FT6' respectively. This 50 Ohm coax cable has a solid bare copper center conductor and aluminum taped outer conductor. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. With higher flexibility, the LMR-240 cable has a bending radius of 3/4 inch.The LMR transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The LMR-240 cable is similar in size to RG8X cables.The Times LMR-240 plenum-rated low loss coaxial cable is available in bulk and is priced per foot.This cable requires Times Microwave TC-240 series connectors. Learn More
-
Times Microwave - Cable Cutting Tool$55.18Times Microwave LMR square cut cable cutter is designed specifically for use on the entire range of LMR cables, from LMR-195 through LMR-600. This cable cutter tool quickly and easily square cuts the LMR cable end making it ready for connector termination. No metallic residue is left, eliminating the need for wire brushing. Safety locking mechanism keeps the tool positively closed until needed or when stored in a pouch. Streamlined designed fits more easily into a Times or other pouch. Times "blue" color replaces the old red color. Learn More
-
Times Microwave - 1m TFT402 Jumper N Male to N Male$75.83Times Microwave 1 meter TFT402 Jumper N Male to N Male. Learn More
-
Times Microwave Systems - BNC Male Crimp-LMR200, No Braid Trim Advantage$13.42TIMES No-Braid-Trim Advantage BNC male crimp connector for LMR-200 cable. Silver plated bodies, gold center pin. Solder center pin, crimp on braid (no braid trimming required). Learn More
-
Ventev - SMA Female/Jack to TNC Male/Plug Adapter$9.92SMA Female/Jack to TNC Male/Plug Adapter for Changing Connector Styles Learn More
-
Times Microwave Systems - 3/8" LMR400 Coaxial Cable$1.62The Times Microwave LMR-400 is a low loss braided coaxial cable. This 3/8 inch 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. Learn More
-
Ventev - 18" TWS100 Jumper RPTNCF(B) - RARPTNCM$12.90The TerraWave 100-02RA-03-P18L coaxial cable assembly uses 18 inches of TWS-100 antenna extension cable. This cable jumper assembly connects a right angle RP-TNC Male (Female center pin) to a RP-TNC long bulkhead Female (Male center pin).The TerraWave 18 inch coax cable assembly includes heat shrink. Learn More
-
Ventev - 3' TWS400 Jumper NM - NM$26.44The TerraWave 400-07-07-P3' coaxial cable assembly uses 3 feet of TWS-400 antenna extension coax cable. This cable jumper assembly connects a N-style Male (Male center pin) connector to both ends.The TerraWave 3 foot coax cable assembly includes heat shrink. Learn More
-
Ventev - 6' LMR240 Jumper NM - SMAM$38.23WIRELESS SOLUTIONS 6' LMR240 Jumper. Made of LMR240 with N Male (54919) on one end and SMA Male (55222) on the other Learn More
-
Ventev - 6' RG142P Jumper NM - NM$44.50The Wireless Solutions RG142PNMNM-6 coaxial cable assembly uses 6 feet of RG142 plenum-rated cable. This jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink.This Wireless Solutions 6 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 3' LMR240 Jumper SMAM - SMAM$29.87WIRELESS SOLUTIONS 3' LMR240 Jumper. Made of LMR240 with SMA Male (55222) connectors on each end. Learn More
-
Ventev - 3' LMR400LLPL Orange Jumper NM - NM$72.21The Wireless Solutions LMR400LLPLNMNM-3 coaxial cable assembly uses 3 feet of orange LMR-400-LLPL cable. This cable jumper assembly is fitted with N male (14515) connectors on each end. The crimp connectors include heat shrink.This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Times Microwave Systems - LMR-400 Prep Tool for virtually all connectors$128.54Times Microwave combination manual cable preparation tool is made for use with 3/8 inch LMR-400 coaxial cable using crimp and clamp-style connectors. This cable hand prep tool joins a cable stripper tool and a cable trimming tool into one easy-to-use devicePrepare LMR-400 coax cable in two simple steps. First, insert the cable into side one, twist, cut, and expose the center conductor. Second, flip the tool around and insert the cable into side two. Twist and turn to expose the coax braid. This cable preparation tool has a built-in deburr tool and works with nearly all LMR-400 connectors. Learn More
-
Times Microwave -Bulkhead and flange mount Arrestor, N/F$69.15TIMES MICROWAVE 20-1000 MHz general coverage bulkhead and flange mt. 10KA surge. <200uJ throughput energy. Power based on frequency. N female connectors. Learn More
-
Ventev - 3' TWS195 Jumper NM - NM$25.51Wireless Solutions 3' TWS195 Jumper. Made of TWS195 with N Male (36421) connectors on each end. Learn More
-
Ventev - DIN Rail Clipfor SunSaver Controller$2.12VENTEV DIN Rail Clip for SunSaver Controller. Mounts to 35mm rail. Includes screws, order 2 per controller. Learn More
-
Wireless Solutions - 3'TWS240 Jumper NM - NM$15.97WIRELESS SOLUTIONS 3' TWS-240 Antenna extension cable with N-Style Female (M) to N-Style Female (M). Includes heat shrink. Learn More
-
Ventev - 6' RG142P Jumper NM - SMAM Rt. Angle$59.61WIRELESS SOLUTIONS 6' Jumper. Made of double shielded RG142P cable. Crimp N male to crimp SMA Male right angle. Learn More
-
Ventev - 2' TWS240 Jumper NM - NM$18.71WIRELESS SOLUTIONS 2' TWS-240 Antenna extension cable with N-Style Female (M) to N-Style Female (M). Includes heat shrink. Learn More
-
TerraWave - 3/8"TWS-400FR 50 Ohm Braided Coaxial Cable$1.87The TerraWave TWS-400FR-M flexible low loss coaxial cable is a non-halogenated, low smoke, fire-retardant cable designed for in-building applications. This 3/8 inch, 50 Ohm coax cable has a 90 percent braid shield for low loss. The black fire-retardant polyethylene jacket is MSHA approved. The braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility, simplified connectorization, and a fire-retardant jacket. It can be used in almost any application where handling characteristics, improved shielding and low loss is required. The TerraWave TWS-400FR-M low loss fire-retardant coax cable is available in bulk and is priced per foot. Learn More
-
Ventev - 75' TWS400 Jumper NM - NM$90.46WIRELESS SOLUTIONS 75' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
TerraWave - TWS-240 50Ohm Coax Cable$0.72The TerraWave TWS-240 low loss coaxial cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. This 50 Ohm coax cable has a solid copper center conductor and stranded outer conductor for a 3/4 inch bending radius. Low loss is achieved because of the 90 percent braided shield. A foam polyethylene serves as insulation. The TWS-240 transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The braided coaxial cable is similar in size to RG8X cables and fits 240 type connectors. The TerraWave TWS-240 low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
Wireless Solutions - 4' TWS400 Jumper NM - NM$21.20WIRELESS SOLUTIONS 4' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
Ventev - 5' TWS195 Jumper RPTNCF - RPTNCM$20.91The TerraWave 195-01-02-P5' coaxial cable assembly uses 5 feet of TWS-195 antenna extension coax cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC Female (Male center pin).The TerraWave 5 foot coax cable assembly includes heat shrink. Learn More
-
Ventev - 10' TWS400 Jumper RPTNCF - RPTNCM$33.40WIRELESS 10' TWS-400 Antenna Extension Cable with RPTNC Female (F, 416952) to RPTNC Jack (M, 440939). Includes Heat Shrink. Learn More
-
Ventev - 18" TWS100 Jumper RPTNCF - RPTNCM$31.31WIRELESS SOLUTIONS 18" TWS-100 Extension Cable with RPTNC Jack (M Center Pin) to RPTNC Female (F Center Pin). Includes Heat Shrink. Learn More
-
Ventev - 2' LMR200 Jumper NM - SMAM$32.29WIRELESS SOLUTIONS 2' LMR200 Jumper. Made of LMR200 with N Male (92978) on one end and SMA Male (RSA_3000-C2) on the other end. Learn More
-
Times Microwave -DC-3.0 GHz Replacement Gas Tube Lightning Arrestor$73.20TIMES MICROWAVE DC to 3.0 GHZ gas tube lightning arrestor. Passes up to +/- 90 VDC, 20A max. Bi-directional. Bulkhead mount. N/F Ant.-N/M Equip. Learn More
-
TerraWave - TWS-240FR50 Ohm Coaxial Cable$1.35The TerraWave TWS-240FR-M low loss coaxial cable is a non-halogenated, low smoke, fire-retardant cable designed for in-building applications. This braided coax cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. This 50 Ohm coax cable has a solid bare copper center conductor and stranded outer conductor. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. This braided coax cable is UL, MSHA, CATV, and CL2 listed. The transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The fire-retardant cable is similar in size to RG8X cables and fits 300 style connectors. The TerraWave TWS-240FR-M fire-retardant low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
Ventev - 3' TWS240 Jumper NM - RPSMAM$22.31WIRELESS SOLUTIONS 3' TWS-240 Antenna extension cable with N-Style Male (M) to RP SMA Male (M, F). Includes heat shrink. Learn More
-
Wireless Solutions - 5'TWS400 Jumper NM - NM$15.75WIRELESS SOLUTIONS 5' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
Times Microwave -.680-2.2 GHz DC Blocked Arrestor, NF/NF$96.77TIMES MICROWAVE .680-2.2 GHz DC Blocked Arrestor. N/F on antenna port, N/F on equipment port. Solid brass. Learn More
-
Ventev - 75' TWS600 Jumper NM - NM$191.79WIRELESS SOLUTIONS 75' TWS-600 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
Times Microwave Systems - 7/16 DIN Female-LMR400$76.00TIMES 7/16 DIN female connector for LMR400 coaxial cable. Solder center pin, clamp on braid. Learn More
-
Ventev - 18" TWS100 Jumper NF(B) - RASMAM$28.23WIRELESS TWS-100 18" Antenna Extension Cable with N Bulkhead Jack to Right Angle SMA Male. Includes heat shrink. Learn More
-
Ventev - Kit to mountLinkUPS enclosure to Utility Pole$216.20UTILITY Pole mounting kit for LinkUPS and Solar Power Systems. Includes banding and all hardware. Pole diameter range 4" to 13" for bands. Keyhole also Learn More
-
Ventev - 15' TWS400 Jumper NM - NM$37.94WIRELESS SOLUTIONS 15' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
Wireless Solutions -30' TWS400 Jumper NM - NM$57.03The TerraWave 400-07-07-P30' coaxial cable assembly uses 30 feet of TWS-400 antenna extension cable. This cable jumper assembly connects N-style Male (Male center pin) connectors to both ends. The TerraWave 30 foot coax cable assembly includes heat shrink. Learn More
-
Ventev - 5' TWS400 Jumper RPTNCF - RPTNCM$23.92WIRELESS 5' TWS-400 Antenna extension cable with RPTNC Female (F center pin) to RPTNC Jack (M center pin). Includes heat shrink.The jumper is an excellent substitute for Cisco # AIR-CAB005LL-R Learn More
-
Ventev - 10' RG142P Jumper NM - NM$66.36The Wireless Solutions RG142PNMNM-10 coaxial cable assembly uses 10 feet of RG142 plenum-rated cable. This cable jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 10 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 10' TWS195 Jumper RPSMAF - RPSMAM$30.43WIRELESS Solutions 10' TWS-195 Antenna extension cable with RPSMA Female (F center pin) to RPSMA Jack (M center pin). Includes heat shrink. Learn More
-
Ventev - 6' RG142P Jumper NM - SMAM$46.23WIRELESS SOLUTIONS 6' RG142P Jumper. Made of RG142P with SMA Male (49275) and N Male (54680) on each end. Learn More
-
Wireless Solutions - 6' TWS240 Jumper NM - NM$24.75WIRELESS 6' TWS-240 Antenna extension cable with N Female to N Female. Includes heat shrink. Learn More
-
Ventev - 3' RGS142 Jumper NM - NM$38.66The Wireless Solutions RGS142NMNM-3 coaxial cable assembly uses 3 feet of RGS142 cable. This cable jumper assembly is fitted with N male (54680) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
TerraWave - TWS-240UFCoax Cable$1.08The TerraWave TWS-240UF UltraFlex low loss coaxial cable has a very flexible PVC jacket for use in mobile antenna applications. This braided coax cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. The 1/4 inch 50 Ohm coax cable has a stranded bare copper center conductor. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. This transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The braided coaxial cable is similar in size to RG8X cables and fits 240 type connectors. The TerraWave TWS-240 UltraFlex low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
Times Microwave Systems - LMR-240 Flex Cable$1.10The Times Microwave LMR240 low loss LMR-240 coaxial cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. This 50 Ohm coax cable has a solid bare copper center conductor and stranded outer conductor that results in a 3/4 inch bending radius. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. The LMR-240 transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The LMR-240 cable is similar in size to RG8X cables and fits LMR-240 connectors.The Times LMR-240 low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
Wireless Solutions -15' LMR240 Jumper NM - SMAM$51.30WIRELESS SOLUTIONS 15' LMR240 Jumper. Made of LMR240 with N Male (54919) end and SMA Male (55222) on the other. Learn More
-
Ventev - 20' TWS400 Jumper RPSMAF - RPSMAM$51.56WIRELESS SOLUTIONS 20' TWS-400 Antenna extension cable with RPSMA Female (F center pin) to RPSMA Jack (M center pin). Includes heat shrink. Learn More
-
Ventev - 3' LMR240 Jumper NM - NM$37.90The Wireless Solutions LMR240NMNM-3 coaxial cable assembly uses 3 feet of LMR-240 cable. This cable jumper assembly is fitted with N male (54919) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 4' RG142P Jumper NM - NM$37.11The Wireless Solutions RG142PNMNM-4 coaxial cable assembly uses 4 feet of RG142 plenum-rated cable. This cable jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 4 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
-
-
-
-
-
15' LMR300 Jumper NM - TNCM with special label$68.0815' LMR300 Jumper NM - TNCM with special label Learn More
-
Ventev / TerraWave - 6 dBi Left Facing Angled Handrail Antenna$677.086 dBi Left Facing Angled Handrail Antenna Learn More
-
-
3/8 Low Loss Low Passive Intermod Coax In/Outdoor"$14.803/8 Low Loss Low Passive Intermod Coax In/Outdoor" Learn More
-
-
-