All Products

LARSEN 450-470 MHz directional yagi antenna. 5 elem., 9dBd gain, 300 watts. Welded in black finish.N-female termination. Includes mounting hardware. Learn More

The Larsen NMOKNOCONN vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58A/U cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

LARSEN rain cap for NMO mount. Black only. Learn More

The Larsen NMOKUD vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58/U dual shield cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

The Larsen NMO150B base-loaded 5/8 wave antenna only (black) operates within the VHF frequency range, 144-174 MHz. This vehicle antenna delivers high performance, with a gain of 3 dB (with ground plane). Maximum power input is 200 watts. The 49 inch whip antenna is field-tunable. Order NMO mount for your Larsen VHF mobile antenna separately. Learn More

The RFS ICA12-50JPLW 1/2 inch plenum-rated coaxial cable features an air dielectric. The 50 Ohms coax cable has a white jacket. This air dielectric cable has an annular corrugated copper outer conductor and copper-clad aluminum inner conductor. Maximum frequency capacity is 6.0 GHz. This transmission line uses 1/2 inch standard connectors. The RFS 1/2 inch plenum-rated coaxial cable with air dielectric is available in bulk and is priced per foot. Learn More

LARSEN 27-30 MHz NMO black loading coil only. Learn More

The Larsen NMOMMRPL magnetic antenna mount is for use with Motorola-style, NMO mobile antennas. This Motorola-style magnet mount provides temporary, easily removable vehicle mounting for mobile antennas. This high frequency 0-3000 MHz NMO mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna mount is constructed from a zinc alloy body plated with copper and nickel that is black coated. The magnetic base has a protective coating that prevents damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style antennas includes 12 feet of RG58A/U cable. UHF male connector is installed. Learn More

The Larsen NMOMMRDSSMA vehicle antenna magnetic mount is for use with Motorola-style, NMO mobile antennas. This Motorola-style magnet mount provides temporary, easily removable mounts for mobile antennas. This high frequency 0-3000 MHz NMO mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna mount is constructed from a zinc alloy body plated with copper and nickel. The magnetic base has a protective coating that prevents damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style mobile antennas includes 12 feet of RG58A/U dual shield cable. SMA male connector is installed. Learn More

LARSEN trunk gutter mount for use with NMO antennas. Stainless steel "L" bracket fastens with three screws. Includes 17'RG-58/U cable & connector. Learn More

The Larsen NMO150BK base-loaded VHF mobile antenna operates within the frequency range, 144-174 MHz. This 51.5 inch whip antenna features a gain of 3 dBd. The vehicle antenna includes a 3/4 inch hole mount, 17 feet of RG58A/U cable and a loose UHF male connector for vehicle installation. Learn More

LARSEN 800-866 MHz NMO collinear mobile antenna. 3.4dB gain, 200 watts. Order Motorola style mount separately. Black. Learn More

LARSEN 40-50 MHz NMO black loading coil only. Learn More

Larsen YA6800W yagi directional antenna is designed for high performance and long life in the most demanding applications. Larsen's black-finished welded yagi directional antenna is a 4-element antenna with 8 dBi directional gain and operates within a frequency range of 806 - 866 MHz. The maximum power input is 300 watts and the antenna is terminated with an N Female connector. The convenient U-bolt mounting hardware for pipes up to 2 inch makes installation easy and are included.This yagi antenna uses a rugged, fully-welded design that is strengthened by aluminum alloys and completely weatherized. Learn More

LARSEN 0-3000 MHz NMO magnet mount. Includes 12' RG58A/U cable and installed BNC connector. Learn More

The Larsen NMOMMRMPL vehicle antenna magnetic mounti for use with Motorola-style mobile antennas. This Motorola-style magnet mount provides temporary, easily removable vehicle mounting for mobile antennas. This high frequency 0-3000 MHz magnet mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna vehicle mount is constructed from a zinc alloy body plated with copper and nickel that is black coated. The magnetic base has a protective coating designed to prevent damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style antennas includes 12 feet of RG58A/U cable. Mini UHF male connector is installed. Learn More

LARSEN 136-512 MHz NMO quarter wave mobile antenna only. Order desired NMO 3/4" mount separately. Learn More

LARSEN 40-50 MHz 200 watt base loaded unity gain 1/4 wave chrome mobile antenna. Purchase Motorola style mount separately. Learn More

Larsen YA5900W yagi directional antenna is designed for high performance and long life in the most demanding applications. Larsen's black-finished welded yagi directional antenna is a 7-element antenna with 11 dBi directional gain and operates within a frequency range 890 - 960 MHz. The maximum power input is 300 watts and the antennas is terminated with an N Female connector. Stainless steel U-bolt mounting hardware for pipes up to 1-5/8 inch is included and makes installation easy.This yagi antenna uses a rugged, fully-welded design that is strengthened by aluminum alloys and completely weatherized. Learn More

LARSEN UHF coil. Use with appropriate whip for desired frequency. Black finish to match Kulrod T(TM) whips. Learn More

LARSEN UHF male solder Female and UG175 adaptor for use on RG55, 58, 141 and 142 cables. Learn More

The Larsen NMOKMPL vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58/U cable and no connector. Thread size is 1 1/8 inch - 18. Learn More

Motorola-style magnet bases provide temporary, easily removable mounts for antennas. Thread size 1-1/8"-18. Learn More

The RFS ICA12-50JPL 1/2 inch plenum-rated coaxial cable features an air dielectric. The 50 Ohms coax cable has a blue jacket. This air dielectric cable has an annular corrugated copper outer conductor and copper-clad aluminum inner conductor. Maximum frequency capacity is 6.0 GHz. This transmission line uses 1/2 inch standard connectors.The RFS 1/2 inch plenum-rated coaxial cable with air dielectric is available in bulk and is priced per foot. Learn More

The RFS 810929-031 7/8 inch plenum-rated coaxial cable features an air dielectric. The 50 Ohms coax cable has a 10 inch bending radius per foot. This air dielectric cable has a helically-corrugated copper outer conductor and copper tube inner conductor. Maximum frequency capacity is 3.0 GHz. No automated prep tool is available for this transmission line -- air connectors are used.The RFS 7/8 inch plenum-rated coaxial cable with air dielectric is available in bulk and is priced per foot. Learn More

LARSEN 698-960/1710-2700 MHz Shadow Low Profile Transit antenna. NMO mountable. 2 dBi gain, Black color. Requires an NMOHF (high frequency) mount. Learn More

LARSEN 144-174 MHz NMO black loading coil only. Requires 19616 whip and NMO mount. Learn More

The Larsen NMO150C base-loaded 5/8 wave antenna only operates within the VHF frequency range, 144-174 MHz. This vehicle antenna delivers high performance, with a gain of 3 dB (with ground plane). Maximum power input is 200 watts. The 49 inch whip antenna is field-tunable and includes a black coil with chrome whip. Order NMO mount for your Larsen VHF mobile antenna separately. Learn More

LARSEN 806-896 MHz quarter wave chrome pre-tuned antenna. Order NMO/ Motorola style mount separately. Learn More

LARSEN FME male to SMA male adapter. Learn More

The Larsen NMOKMPL vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58A/U cable and mini UHF connector. Thread size is 1 1/8 inch - 18. Learn More

LARSEN 0-3000 MHz magnet mount. Includes 12' RG58A/U and FME connector 3 1/4" in size and motorola style mount. Learn More

RFS BA1010-1 omnidirectional fiberglass antenna operates in the 146 - 164 MHz frequency range. This unity gain VHF omni antenna is has a maximum power input of 500 watts and is terminated with an N female connector. This heavy-duty omnidirectional antenna is permanently affixed to a unique mounting fixture that allows for mounting either on top of or along side of most vertical supports. The RFS BA1010-1 omnidirectional fiberglass antenna includes a bracket and u-bolts for mounting. Learn More

LARSEN rubber gasket for NMO coils. 3 per package. Learn More

LARSEN 806-960 MHz Mirage low profile unity gain antenna. 100 watts. White. Order Motorola/NMO style mount and cable separately. Learn More

LARSEN 806-896 MHz 3dB on glass antenna. Enclosed coil whip. Black finish. Includes 14' dual shield RG58 cable and Mini-UHF male connector. Learn More

LARSEN test mount adapter. Checks antenna feedline and radio at the same time. Screws onto NMO/Motorola style mount. UHF female connection. Learn More

LARSEN 150-170 MHz wide band quarter wave black antenna with spring. Order Motorola style mount separately. Learn More

LARSEN 450-470 MHz NMO 200 watt 3.4dB gain collinear mobile antenna only. Order desired NMO mount separately. Learn More

LARSEN FME male to N male adapter. Learn More

LARSEN 3-5V 26dB GPS antenna with NMO for any NMO antenna in 27-6000MHz range. Direct mount 3/4" hole. Includes 17' RG174 (GPS) and 17' RG58 (NMO). No conn Learn More

Auto trimming tool for ICA & LCF 12 Learn More

30' Ruggedized OS2 2F Riser Patch Cord LC to LC Learn More

N Female for SCF12-50J Learn More

Grounding Kit-1-1/4" =494677" Learn More

132-850 1/4 Wave Antenna w/ Spring, Black Learn More

Learn More

Learn More

RFS 1/2" Radiating CELLFLEX Cable. 50 ohm. Fire ret. (type CATVX) jack. Utilizes standard LCF12-50J conn. Black jack. MSHA approved for use in Mines. Learn More

RFS ICA12-50JPLR Red 1/2" Plenum Air Coaxial Cable for Public Safety Applications. Learn More

LARSEN Mini-UHF Male Crimp connector for RG58/U cable. Nickle finish. Teflon insulation. 50 ohm impedance. Learn More

This special trimming tool improves the cable preparation prior to connector attachment. No further tools are required to prepare the cable for the connector attachment. This is due to the unique design of the trimming tool, which combines all necessary functions in one tool. It can be used for all CELLFLEX LCF12-50 foam dielectric cables in combination with the OMNI FIT Premium connector family D01, OMNI FIT Standard family B32 and RAPID FIT families 060/062 + 070/072. The Universal Trimming Tools Series offers the additional advantage to be convertible to different connector families and cable sizes (1/4", 3/8", 1/2" and 7/8") only by changing the insert. Learn More

RFS This special trimming tool improves the cable preparation prior to connector attachment. No furthertools are required to prepare the cable for the connector attachment. This is due to the unique design of the trimming tool, which combines all necessary functions in one tool. It can be used for CELLFLEX LCF78-50 foam dielectric cables in combination with the OMNI FIT Premium connector family D01. The Universal Trimming Tools Series offers the additional advantage to be convertible to different connector families and cable sizes (1/4", 3/8", 1/2" and 7/8") only by changing the insert. Learn More

LARSEN Super seal gasket for NMO mount. 3 per package. Learn More

LARSEN 152-162 MHz unity gain 1/4 wave chrome pre-tuned antenna. Order NMO/ Motorola style mount separately. Learn More

LARSEN FME male to UHF male adapter. Learn More

RFS TRIM-LCF12-D01-A is a Special trimming tool makes the OMNI FIT Premium D01 connector attachment easier. No further tools are required to prepare the cable for the connector attachment. This is due to the unique designof the trimming tool, which combines all necessary functions in one compact tool. It can be used for CELLFLEX LCF12-50 foam dielectric cables. Learn More