All Products

WIRELESS SOLUTIONS 10' TWS-240 Antenna extension cable with N-Style Plug (M) to N-Style Plug (M). Includes heat shrink. Learn More

The RFS ICA12-50JPLW 1/2 inch plenum-rated coaxial cable features an air dielectric. The 50 Ohms coax cable has a white jacket. This air dielectric cable has an annular corrugated copper outer conductor and copper-clad aluminum inner conductor. Maximum frequency capacity is 6.0 GHz. This transmission line uses 1/2 inch standard connectors. The RFS 1/2 inch plenum-rated coaxial cable with air dielectric is available in bulk and is priced per foot. Learn More

The Wireless Solutions RG142PNMSM-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with a nickel-plated N male (372528) connector and a SMA male (49275) connector. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

The TerraWave 195-07-18-P3' cable assembly connects an N-style plug to a SMA plug. This jumper assembly uses 3 feet of TWS-195 antenna extension cable. One end of the coax cable has an N Male (Male center pin) and the other a SMA Male (Male center pin).The TerraWave 3 foot cable jumper assembly includes heat shrink. Learn More

The TerraWave TWS-195 low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This low loss 50 Ohm coax cable features a foil shield and 90 percent braided shield. It has a polyethylene, gas-injected UV-resistant jacket. The low loss transmission line can be used in almost any application where handling characteristics, improved shield and low loss is required. The low loss coax cable has a comparable performance to RG142 cable and uses RG58 or RG142 connectors. The TerraWave TWS-195 low loss coax cable is available in bulk and is priced per foot. Learn More

The TerraWave 400-07-07-P10' coaxial cable assembly uses 10 feet of TWS-400 antenna extension cable. This cable jumper assembly connects a N-style Male (Male center pin) connectors to both ends.The TerraWave 10 foot coax cable assembly includes heat shrink. Learn More

The Wireless Solutions LMR400NMNF-6 coaxial cable assembly uses 6 feet of LMR-400 cable. This cable jumper assembly is fitted with an N female (44728) connector and an N male (14515) connector. The crimp connectors include heat shrink. This Wireless Solutions 6 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

The Wireless Solutions RG142PNMBM-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and a BNC male connector. The crimp connectors include heat shrink.This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

The Wireless Solutions RG142PNMNM-2 coaxial cable assembly uses 2 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 2 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

The TerraWave TWS-400DB direct burial coaxial cable contains a weatherproofing compound around the foil and braid allowing for continuous performance even if cable has sustained damage. The 3/8 inch 50 Ohm coax cable has a solid center conductor and UV-resistant jacket. This braided cable allows for a 1 inch bending radius for applications requiring greater flexibility. The TerraWave direct burial low loss coaxial cable is available in bulk and is priced per foot. Learn More

The TerraWave TWS-195FR-M coaxial cable (black) features a non-halogen, low smoke, fire-retardant cable designed for in-building applications. The TWS-195 cable is MSHA approved for mining operations. This low loss 50 Ohm coax cable features a 90 percent braided shield. The TWS-195 transmission line can be used in almost any application where handling characteristics, improved shield and low loss is required. The fire-retardant low loss coax cable has a comparable performance to RG142 cable and uses RG58 connectors. The TerraWave fire-retardant TWS-195 low loss coax cable is available in bulk and priced per foot. Learn More

The Wireless Solutions LMR400NMNM-5 coaxial cable assembly uses 5 feet of LMR-400 cable. This cable jumper assembly is fitted with N male (14515) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 5 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

WIRELESS SOLUTIONS 2' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More

The TerraWave 400-07-07-P20' coaxial cable assembly uses 20 feet of TWS-400 antenna extension cable. This cable jumper assembly connects N-style male (Male center pin) connectors to both ends.The TerraWave 20 foot coax cable assembly includes heat shrink. Learn More

The Wireless Solutions RG142PNMNF-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and an N female connector. The crimp connectors include heat shrink. This Wireless Solutions cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

WIRELESS SOLUTIONS 1' RG58 Jumper. Made of RG58 with N Female (83032) on one end and Mini UHF Male (43139) on the other. Learn More

WIRELESS SOLUTIONS 3' LMR400UF Jumper. Made of LMR400UF with N Male (14515) on each end. Learn More

WIRELESS Solutions 2' TWS-195 Antenna extension cable with N-Style Bulkhead Jack (F) to SMA Female (M). Includes heat shrink. Learn More

tessco Jumper Assembly. 3' long. Made of Cablewave SCF12-50J 1/2" Superflexible cable. N Male omni fit connector on one end and omni fit N Female on the other. Learn More

TWS-400 braided coaxial cable is low loss. This 3/8 inch 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. Generic for LMR-400 Learn More

The Ventev TWS-600 1/2 inch standard braided coax cable with foam dielectric has a UV-resistant polyethylene jacket for outdoor use. This low loss 50 Ohm coax cable is designed with a stranded outer conductor with a copper-clad aluminum center conductor. Maximum frequency capacity is 10.3 GHz. The Ventev 1/2 inch braided coaxial cable is available in bulk and is priced per foot. Learn More

The TerraWave 400-07-07-P6' cable assembly connects an N-style plug to a SMA plug. This jumper assembly uses 6 feet of TWS-400 antenna extension coaxial cable. This coax cable has N Male (Male center pin) connectors installed on both ends.The TerraWave 6 foot cable jumper assembly includes heat shrink. Learn More

WIRELESS Solutions 12" TWS-195 Antenna extension cable with N Plug (M center pin) to N Plug (M center pin). Includes heat shrink. Learn More

The TerraWave TWS-100 braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. Learn More

The TerraWave TWS-200 flexible low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This low loss50 Ohm coax cable features a 90 percent coverage shield. It has a solid copper center conductor, stranded outer conductor, and polyethylene foam insulation. The transmission line features a PVC jacket with un-bounded aluminum tape allowing end stripping with automated cable prep tools. While designed for mobile antenna applications, it can be used in almost any application where handling characteristics, improved shield and low loss is required. The low loss coax cable has a comparable performance to RG142 cable and uses RG58 or RG142 connectors. The TerraWave TWS-200 low loss coax cable is available in bulk and sold per foot. Learn More

The TerraWave 195-07-18-P2' coaxial cable assembly uses 2 feet of TWS-195 antenna extension cable. This cable jumper assembly connects an N-style male (Male center pin) to a SMA Male (Male center pin).The TerraWave 2 foot coax cable assembly includes heat shrink. Learn More

The TerraWave 195-01-02-P2' coaxial cable assembly uses 2 feet of TWS-195 antenna extension coax cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC Female (Male center pin).The TerraWave 2 foot coax cable assembly includes heat shrink. Learn More

WIRELESS SOLUTIONS 3' LMR240 Jumper. Made of LMR240 with N Male (54919) on one end and SMA Male (55222) on the other end. Learn More

WIRELESS 15' TWS-400 Antenna extension cable with RPTNC Female (F center pin) to RPTNC Jack (M center pin). Includes heat shrink. Learn More

WIRELESS SOLUTIONS 18" TWS-100 Antenna extension cable with N Bulkhead Female (F center pin) to N Plug (M Center pin). Includes heat shrink. Learn More

The Wireless Solutions RG142PNMTM-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double shielded cable. This cable jumper assembly is fitted with an N male connector and a TNC male connector. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

The Wireless Solutions LMR400NMNM-6 coaxial cable assembly uses 6 feet of LMR-400 cable. This cable jumper assembly is fitted with N male (14515) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 6 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

WIRELESS SOLUTIONS 3' jumper w/ double shielded RG142P cable. 3' long with an crimp BNC males on each end. Learn More

The Wireless Solutions LMR400NMNM-10 coaxial cable assembly uses 10 feet of LMR-400 cable. This cable jumper assembly is fitted with N male (330822) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 10 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

The Wireless Solutions RG142PNMBM-2 coaxial cable assembly uses 2 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and a BNC male connector. The crimp connectors include heat shrink. This Wireless Solutions 2 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

WIRELESS Solutions 3' TWS-195 Antenna extension cable with N Female (M Center Pin) to RPSMA Female (F center pin). Includes heat shrink. Learn More

The TerraWave 100-02-03-P18" coaxial cable assembly uses 18 inches of TWS-100 antenna extension cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC bulkhead Female (Male center pin).The TerraWave 18 inch coax cable assembly includes heat shrink. Learn More

The RFS ICA12-50JPL 1/2 inch plenum-rated coaxial cable features an air dielectric. The 50 Ohms coax cable has a blue jacket. This air dielectric cable has an annular corrugated copper outer conductor and copper-clad aluminum inner conductor. Maximum frequency capacity is 6.0 GHz. This transmission line uses 1/2 inch standard connectors.The RFS 1/2 inch plenum-rated coaxial cable with air dielectric is available in bulk and is priced per foot. Learn More

The RFS 810929-031 7/8 inch plenum-rated coaxial cable features an air dielectric. The 50 Ohms coax cable has a 10 inch bending radius per foot. This air dielectric cable has a helically-corrugated copper outer conductor and copper tube inner conductor. Maximum frequency capacity is 3.0 GHz. No automated prep tool is available for this transmission line -- air connectors are used.The RFS 7/8 inch plenum-rated coaxial cable with air dielectric is available in bulk and is priced per foot. Learn More

Learn More

Learn More

SMA Female/Jack to TNC Male/Plug Adapter for Changing Connector Styles Learn More

Learn More

Learn More

Learn More

The TerraWave 100-02RA-03-P18L coaxial cable assembly uses 18 inches of TWS-100 antenna extension cable. This cable jumper assembly connects a right angle RP-TNC Male (Female center pin) to a RP-TNC long bulkhead Female (Male center pin).The TerraWave 18 inch coax cable assembly includes heat shrink. Learn More

The TerraWave 400-07-07-P3' coaxial cable assembly uses 3 feet of TWS-400 antenna extension coax cable. This cable jumper assembly connects a N-style Male (Male center pin) connector to both ends.The TerraWave 3 foot coax cable assembly includes heat shrink. Learn More

WIRELESS SOLUTIONS 6' LMR240 Jumper. Made of LMR240 with N Male (54919) on one end and SMA Male (55222) on the other Learn More

The Wireless Solutions RG142PNMNM-6 coaxial cable assembly uses 6 feet of RG142 plenum-rated cable. This jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink.This Wireless Solutions 6 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

WIRELESS SOLUTIONS 3' LMR240 Jumper. Made of LMR240 with SMA Male (55222) connectors on each end. Learn More

The Wireless Solutions LMR400LLPLNMNM-3 coaxial cable assembly uses 3 feet of orange LMR-400-LLPL cable. This cable jumper assembly is fitted with N male (14515) connectors on each end. The crimp connectors include heat shrink.This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

Wireless Solutions 3' TWS195 Jumper. Made of TWS195 with N Male (36421) connectors on each end. Learn More

VENTEV DIN Rail Clip for SunSaver Controller. Mounts to 35mm rail. Includes screws, order 2 per controller. Learn More

WIRELESS SOLUTIONS 3' TWS-240 Antenna extension cable with N-Style Female (M) to N-Style Female (M). Includes heat shrink. Learn More

WIRELESS SOLUTIONS 6' Jumper. Made of double shielded RG142P cable. Crimp N male to crimp SMA Male right angle. Learn More

WIRELESS SOLUTIONS 2' TWS-240 Antenna extension cable with N-Style Female (M) to N-Style Female (M). Includes heat shrink. Learn More

The TerraWave TWS-400FR-M flexible low loss coaxial cable is a non-halogenated, low smoke, fire-retardant cable designed for in-building applications. This 3/8 inch, 50 Ohm coax cable has a 90 percent braid shield for low loss. The black fire-retardant polyethylene jacket is MSHA approved. The braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility, simplified connectorization, and a fire-retardant jacket. It can be used in almost any application where handling characteristics, improved shielding and low loss is required. The TerraWave TWS-400FR-M low loss fire-retardant coax cable is available in bulk and is priced per foot. Learn More

WIRELESS SOLUTIONS 75' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More

The TerraWave TWS-240 low loss coaxial cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. This 50 Ohm coax cable has a solid copper center conductor and stranded outer conductor for a 3/4 inch bending radius. Low loss is achieved because of the 90 percent braided shield. A foam polyethylene serves as insulation. The TWS-240 transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The braided coaxial cable is similar in size to RG8X cables and fits 240 type connectors. The TerraWave TWS-240 low loss coaxial cable is available in bulk and is priced per foot. Learn More

WIRELESS SOLUTIONS 4' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More

The TerraWave 195-01-02-P5' coaxial cable assembly uses 5 feet of TWS-195 antenna extension coax cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC Female (Male center pin).The TerraWave 5 foot coax cable assembly includes heat shrink. Learn More

WIRELESS 10' TWS-400 Antenna Extension Cable with RPTNC Female (F, 416952) to RPTNC Jack (M, 440939). Includes Heat Shrink. Learn More

WIRELESS SOLUTIONS 18" TWS-100 Extension Cable with RPTNC Jack (M Center Pin) to RPTNC Female (F Center Pin). Includes Heat Shrink. Learn More

WIRELESS SOLUTIONS 2' LMR200 Jumper. Made of LMR200 with N Male (92978) on one end and SMA Male (RSA_3000-C2) on the other end. Learn More

The TerraWave TWS-240FR-M low loss coaxial cable is a non-halogenated, low smoke, fire-retardant cable designed for in-building applications. This braided coax cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. This 50 Ohm coax cable has a solid bare copper center conductor and stranded outer conductor. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. This braided coax cable is UL, MSHA, CATV, and CL2 listed. The transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The fire-retardant cable is similar in size to RG8X cables and fits 300 style connectors. The TerraWave TWS-240FR-M fire-retardant low loss coaxial cable is available in bulk and is priced per foot. Learn More

WIRELESS SOLUTIONS 3' TWS-240 Antenna extension cable with N-Style Male (M) to RP SMA Male (M, F). Includes heat shrink. Learn More

WIRELESS SOLUTIONS 5' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More

WIRELESS SOLUTIONS 75' TWS-600 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More

WIRELESS TWS-100 18" Antenna Extension Cable with N Bulkhead Jack to Right Angle SMA Male. Includes heat shrink. Learn More

UTILITY Pole mounting kit for LinkUPS and Solar Power Systems. Includes banding and all hardware. Pole diameter range 4" to 13" for bands. Keyhole also Learn More

WIRELESS SOLUTIONS 15' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More

The TerraWave 400-07-07-P30' coaxial cable assembly uses 30 feet of TWS-400 antenna extension cable. This cable jumper assembly connects N-style Male (Male center pin) connectors to both ends. The TerraWave 30 foot coax cable assembly includes heat shrink. Learn More

WIRELESS 5' TWS-400 Antenna extension cable with RPTNC Female (F center pin) to RPTNC Jack (M center pin). Includes heat shrink.The jumper is an excellent substitute for Cisco # AIR-CAB005LL-R Learn More

The Wireless Solutions RG142PNMNM-10 coaxial cable assembly uses 10 feet of RG142 plenum-rated cable. This cable jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 10 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

RFS BA1010-1 omnidirectional fiberglass antenna operates in the 146 - 164 MHz frequency range. This unity gain VHF omni antenna is has a maximum power input of 500 watts and is terminated with an N female connector. This heavy-duty omnidirectional antenna is permanently affixed to a unique mounting fixture that allows for mounting either on top of or along side of most vertical supports. The RFS BA1010-1 omnidirectional fiberglass antenna includes a bracket and u-bolts for mounting. Learn More

WIRELESS Solutions 10' TWS-195 Antenna extension cable with RPSMA Female (F center pin) to RPSMA Jack (M center pin). Includes heat shrink. Learn More

WIRELESS SOLUTIONS 6' RG142P Jumper. Made of RG142P with SMA Male (49275) and N Male (54680) on each end. Learn More

WIRELESS 6' TWS-240 Antenna extension cable with N Female to N Female. Includes heat shrink. Learn More

The Wireless Solutions RGS142NMNM-3 coaxial cable assembly uses 3 feet of RGS142 cable. This cable jumper assembly is fitted with N male (54680) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

The TerraWave TWS-240UF UltraFlex low loss coaxial cable has a very flexible PVC jacket for use in mobile antenna applications. This braided coax cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. The 1/4 inch 50 Ohm coax cable has a stranded bare copper center conductor. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. This transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The braided coaxial cable is similar in size to RG8X cables and fits 240 type connectors. The TerraWave TWS-240 UltraFlex low loss coaxial cable is available in bulk and is priced per foot. Learn More

WIRELESS SOLUTIONS 15' LMR240 Jumper. Made of LMR240 with N Male (54919) end and SMA Male (55222) on the other. Learn More

WIRELESS SOLUTIONS 20' TWS-400 Antenna extension cable with RPSMA Female (F center pin) to RPSMA Jack (M center pin). Includes heat shrink. Learn More

The Wireless Solutions LMR240NMNM-3 coaxial cable assembly uses 3 feet of LMR-240 cable. This cable jumper assembly is fitted with N male (54919) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

The Wireless Solutions RG142PNMNM-4 coaxial cable assembly uses 4 feet of RG142 plenum-rated cable. This cable jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 4 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

Auto trimming tool for ICA & LCF 12 Learn More

30' Ruggedized OS2 2F Riser Patch Cord LC to LC Learn More

3/8split loom tubing 250'" Learn More

N Female for SCF12-50J Learn More

15' LMR300 Jumper NM - TNCM with special label Learn More

Grounding Kit-1-1/4" =494677" Learn More

6 dBi Left Facing Angled Handrail Antenna Learn More

1/4split loom tubing 250' Learn More

RFS 1/2" Radiating CELLFLEX Cable. 50 ohm. Fire ret. (type CATVX) jack. Utilizes standard LCF12-50J conn. Black jack. MSHA approved for use in Mines. Learn More

RFS ICA12-50JPLR Red 1/2" Plenum Air Coaxial Cable for Public Safety Applications. Learn More

5/16 SPLIT LOCK WASHER 18-8 Learn More

NF Conn for RG142 Plenum Learn More

Learn More

Learn More

This special trimming tool improves the cable preparation prior to connector attachment. No further tools are required to prepare the cable for the connector attachment. This is due to the unique design of the trimming tool, which combines all necessary functions in one tool. It can be used for all CELLFLEX LCF12-50 foam dielectric cables in combination with the OMNI FIT Premium connector family D01, OMNI FIT Standard family B32 and RAPID FIT families 060/062 + 070/072. The Universal Trimming Tools Series offers the additional advantage to be convertible to different connector families and cable sizes (1/4", 3/8", 1/2" and 7/8") only by changing the insert. Learn More

RFS This special trimming tool improves the cable preparation prior to connector attachment. No furthertools are required to prepare the cable for the connector attachment. This is due to the unique design of the trimming tool, which combines all necessary functions in one tool. It can be used for CELLFLEX LCF78-50 foam dielectric cables in combination with the OMNI FIT Premium connector family D01. The Universal Trimming Tools Series offers the additional advantage to be convertible to different connector families and cable sizes (1/4", 3/8", 1/2" and 7/8") only by changing the insert. Learn More

RFS TRIM-LCF12-D01-A is a Special trimming tool makes the OMNI FIT Premium D01 connector attachment easier. No further tools are required to prepare the cable for the connector attachment. This is due to the unique designof the trimming tool, which combines all necessary functions in one compact tool. It can be used for CELLFLEX LCF12-50 foam dielectric cables. Learn More