Pro Telecom Supply is a leading supplier of Commercial and Industrial Communications products. We carry the parts and equipment you need to complete your project on time and affordably. Our partnerships with the leading vendors in telecommunications gives you access to some of the worlds best technology products. Whether you are completing an RF project, or need components for your mobile workforce, Pro Telecom Supply has you covered.
All Products
-
Times Microwave Systems - LMR-195 and LMR-200 Cable Prep Tool$135.50LMR-195 and LMR-200 Cable Prep Tool Learn More
-
Times Microwave Systems - TNC Male Right Angle Crimp-LMR400$21.52TIMES TNC Male Right Angle Crimp connector for LMR-400 coaxial cable. Nickel body, Silver center pin. Teflon dielectric. DOES NOT WORK ON 400-UF. Learn More
-
Times Microwave Systems - Mini-UHF Male -LMR200$4.09TIMES Mini-UHF male crimp connector for LMR- 200 cable. Silver plated bodies, gold center pin. Solder center pin, Crimp on braid. Learn More
-
Times Microwave Systems - LMR-600 1/2" Foam Cable$2.98The Times Microwave LMR-600 1/2 inch standard coax cable with foam dielectric has a UV-resistant Polyethylene jacket for outdoor use. The Times Microwave LMR-600 1/2 inch foam coaxial cable is available in bulk and is priced per foot. Learn More
-
Times Microwave Systems - LMR-200 Flex Cable$1.02The Times Microwave LMR-200 low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. available in bulk and sold per foot. Learn More
-
Times Microwave -Bulkhead and flange mount Arrestor, N/F$77.23TIMES MICROWAVE 20-1000 MHz general coverage bulkhead and flange mt. 10KA surge. <200uJ throughput energy. N/F connectors. IP67 weatherized. Learn More
-
Times Microwave Systems - LMR400-75 3/8" Coaxial Cable$1.61TIMES MICROWAVE DC - 2.5 GHz 3/8" LMR400-75 coax cable. 75 ohm. Lower loss than RG11. Uses LMR400-75 connectors only. Learn More
-
Times Microwave Systems - LMR-240 Flex Cable$1.10The Times Microwave LMR240 low loss LMR-240 coaxial cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. This 50 Ohm coax cable has a solid bare copper center conductor and stranded outer conductor that results in a 3/4 inch bending radius. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. The LMR-240 transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The LMR-240 cable is similar in size to RG8X cables and fits LMR-240 connectors.The Times LMR-240 low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
Times Microwave Systems - LMR600-75 1/2" Coaxial Cable$2.90TIMES MICROWAVE DC - 2.5 GHz 1/2" LMR600-75 coax cable. 75 ohm. Lower loss than RG11. Uses LMR600-75 connectors only. Learn More
-
Times Microwave Systems - Rev. Pol TNC Male LMR400$25.06TIMES reverse polarity TNC male (Female) for LMR400 coaxial cable. Meets FCC specs for use with Spread Spectrum technology. Crimp type. DOES NOT WORK WI Learn More
-
Times Microwave Systems - TNC Male Hex/Knurl Combo No Braid Trim LMR400$12.40TIMES TNC male Advantage connector for LMR-400. Gold pin. Silver plate body, gold center pin. No braid trim. Learn More
-
Times Microwave Systems - LMR-240 Prep Tool for virtually all connectors$132.21TIMES MICROWAVE All-In-One Combination Prep Tool for prep of LMR240 cables for crimp or clamp connectors. Learn More
-
Times Microwave Systems - LMR-200 Watertight Flex Cable$1.21The Times Microwave LMR-200-DB direct burial low loss RG58 coaxial cable has the advantage of being watertight. This 3/16 inch 50 Ohm coax cable offers similar performance compared to corrugated copper cable but provides higher flexibility and simplified connectorization. The braided coaxial cable has a 1/2 inch bending radius.The RG58 cable can be used in almost any application where handling characteristics, improved shielding and low loss are required. The LMR-200 cable has a stranded outer conductor and a copper-clad aluminum center conductor. The 100 percent foil shield makes this coax cable low loss.The Times Microwave LMR-200 direct burial low loss RG58 coax cable is available in bulk and is priced per foot. Learn More
-
Times Microwave -LMR-240-75 1/4" Flex Cable$1.08TIMES MICROWAVE LMR240-75 cable. 1/4" O.D. 75 ohms. Uses LMR240-75 connectors. .75" bending radius. Priced per ft. Learn More
-
Times Microwave Systems - 1/2" LMR600 Fire Retardardant, PVC jack$3.22TIMES MICROWAVE Indoor/Outdoor fire- retardant LMR-600 coaxial cable. PVC jacked. Black. CMR rated. Learn More
-
Times Microwave Systems - LMR-100A-PVC White Flex Cable$1.11The Times Microwave LMR-100A-PVC-W LMR100 flexible, low loss coaxial cable (white) offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This 50 Ohm coax cable has a stranded outer conductor and copper-clad steel center conductor. The 1/8 inch LMR-100 transmission line has a foil shield and 90 percent coverage braid shield for lower loss. A white PVC jacket adds flexibility and color compatibility for indoor applications. RG174 connectors should be used.The Times LMR-100 flexible, low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
Times Microwave Systems - 1/4" LMR240 Plenum Cable$4.34The Times Microwave LMR-240LL-PL orange plenum-rated low loss LMR-240 coaxial cable is an indoor, fire-retardant cable specifically designed for use in return air handling plenums. This braided coax cable offers similar performance compared to corrugated copper cables but provides high flexibility, simplified connectorization, and weatherproofing. It has a UL/NEC & CSA rating of 'CMP' and 'FT6' respectively. This 50 Ohm coax cable has a solid bare copper center conductor and aluminum taped outer conductor. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. With higher flexibility, the LMR-240 cable has a bending radius of 3/4 inch.The LMR transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The LMR-240 cable is similar in size to RG8X cables.The Times LMR-240 plenum-rated low loss coaxial cable is available in bulk and is priced per foot.This cable requires Times Microwave TC-240 series connectors. Learn More
-
-
Times Microwave - Cable Cutting Tool$55.18Times Microwave LMR square cut cable cutter is designed specifically for use on the entire range of LMR cables, from LMR-195 through LMR-600. This cable cutter tool quickly and easily square cuts the LMR cable end making it ready for connector termination. No metallic residue is left, eliminating the need for wire brushing. Safety locking mechanism keeps the tool positively closed until needed or when stored in a pouch. Streamlined designed fits more easily into a Times or other pouch. Times "blue" color replaces the old red color. Learn More
-
Times Microwave - 1m TFT402 Jumper N Male to N Male$75.83Times Microwave 1 meter TFT402 Jumper N Male to N Male. Learn More
-
Cambium Networks - PTP 600 - PTP 100M Clad Cable used for PTP500/600 radios$677.49MOTOROLA PTP Clad Cable 100m reel (328ft Copper Clad Armored Cable for PTP 300/500/600 series radios. Learn More
-
Cambium Networks - PTP 600 SYNC - PTP-SYNC Synchronization Unit for PTP 600$416.56MOTOROLA PTP-SYNC for TDD 500/600. Maintains local synch between collocated radios when timing is unavailable. One PTP-SYNC needed per link. Learn More
-
Cambium Networks - PTP 800 - PTP800 Coax Ground Kit$28.65MOTOROLA PTP800 Coaxial Grounding Cable Kit for 1/4" and 3/8" Cable. Learn More
-
Times Microwave Systems - BNC Male Crimp-LMR200, No Braid Trim Advantage$13.42TIMES No-Braid-Trim Advantage BNC male crimp connector for LMR-200 cable. Silver plated bodies, gold center pin. Solder center pin, crimp on braid (no braid trimming required). Learn More
-
-
-
-
-
-
-
-
Times Microwave Systems - 7/16 DIN Female-LMR400$76.00TIMES 7/16 DIN female connector for LMR400 coaxial cable. Solder center pin, clamp on braid. Learn More
-
Times Microwave -DC-3.0 GHz Replacement Gas Tube Lightning Arrestor$73.20TIMES MICROWAVE DC to 3.0 GHZ gas tube lightning arrestor. Passes up to +/- 90 VDC, 20A max. Bi-directional. Bulkhead mount. N/F Ant.-N/M Equip. Learn More
-
Times Microwave -.680-2.2 GHz DC Blocked Arrestor, NF/NF$96.77TIMES MICROWAVE .680-2.2 GHz DC Blocked Arrestor. N/F on antenna port, N/F on equipment port. Solid brass. Learn More
-
Times Microwave Systems - 3/8" LMR400 Coaxial Cable$1.62The Times Microwave LMR-400 is a low loss braided coaxial cable. This 3/8 inch 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. Learn More
-
Times Microwave Systems - LMR-400 Prep Tool for virtually all connectors$128.54Times Microwave combination manual cable preparation tool is made for use with 3/8 inch LMR-400 coaxial cable using crimp and clamp-style connectors. This cable hand prep tool joins a cable stripper tool and a cable trimming tool into one easy-to-use devicePrepare LMR-400 coax cable in two simple steps. First, insert the cable into side one, twist, cut, and expose the center conductor. Second, flip the tool around and insert the cable into side two. Twist and turn to expose the coax braid. This cable preparation tool has a built-in deburr tool and works with nearly all LMR-400 connectors. Learn More
-
Times Microwave -Bulkhead and flange mount Arrestor, N/F$69.15TIMES MICROWAVE 20-1000 MHz general coverage bulkhead and flange mt. 10KA surge. <200uJ throughput energy. Power based on frequency. N female connectors. Learn More
-
-
3/8 Low Loss Low Passive Intermod Coax In/Outdoor"$14.803/8 Low Loss Low Passive Intermod Coax In/Outdoor" Learn More