Pro Telecom Supply is a leading supplier of Commercial and Industrial Communications products. We carry the parts and equipment you need to complete your project on time and affordably. Our partnerships with the leading vendors in telecommunications gives you access to some of the worlds best technology products. Whether you are completing an RF project, or need components for your mobile workforce, Pro Telecom Supply has you covered.
All Products
-
Pulse / Larsen - 450-470MHz 9dB 5 Element Yagi Antenna$160.71LARSEN 450-470 MHz directional yagi antenna. 5 elem., 9dBd gain, 300 watts. Welded in black finish.N-female termination. Includes mounting hardware. Learn More
-
EnerSys/Yuasa - 12 Volt17.2 AH Battery$141.5112V 17.2 Ah sealed lead acid battery with 7/32" bolt fasteners. 7.13 x 2.99 x 6.57. Learn More
-
Ventev - 10' TWS240 Jumper NM - NM$24.43WIRELESS SOLUTIONS 10' TWS-240 Antenna extension cable with N-Style Plug (M) to N-Style Plug (M). Includes heat shrink. Learn More
-
Pulse / Larsen - 0-1000 MHz, NMO 3/4" mount, No conn.$16.10The Larsen NMOKNOCONN vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58A/U cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More
-
-
Pulse / Larsen - NMO 3/4" mount, No conn.$16.10The Larsen NMOKUD vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58/U dual shield cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More
-
Pulse / Larsen - 144-174 NMO antenna,black$35.08The Larsen NMO150B base-loaded 5/8 wave antenna only (black) operates within the VHF frequency range, 144-174 MHz. This vehicle antenna delivers high performance, with a gain of 3 dB (with ground plane). Maximum power input is 200 watts. The 49 inch whip antenna is field-tunable. Order NMO mount for your Larsen VHF mobile antenna separately. Learn More
-
Ventev - 3' RG142P Jumper NM - SMAM$42.34The Wireless Solutions RG142PNMSM-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with a nickel-plated N male (372528) connector and a SMA male (49275) connector. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Pulse / Larsen - 27-30 MHz NMO Loading Coil, Black$41.64LARSEN 27-30 MHz NMO black loading coil only. Learn More
-
Pulse / Larsen - 0-3000 MHz, Magnet Mount, RG58A/U, UHF-M$49.10The Larsen NMOMMRPL magnetic antenna mount is for use with Motorola-style, NMO mobile antennas. This Motorola-style magnet mount provides temporary, easily removable vehicle mounting for mobile antennas. This high frequency 0-3000 MHz NMO mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna mount is constructed from a zinc alloy body plated with copper and nickel that is black coated. The magnetic base has a protective coating that prevents damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style antennas includes 12 feet of RG58A/U cable. UHF male connector is installed. Learn More
-
Ventev - 18" TWS100 Jumper NF(B) - RASMAM$28.23WIRELESS TWS-100 18" Antenna Extension Cable with N Bulkhead Jack to Right Angle SMA Male. Includes heat shrink. Learn More
-
Ventev - Kit to mountLinkUPS enclosure to Utility Pole$216.20UTILITY Pole mounting kit for LinkUPS and Solar Power Systems. Includes banding and all hardware. Pole diameter range 4" to 13" for bands. Keyhole also Learn More
-
Ventev - 15' TWS400 Jumper NM - NM$37.94WIRELESS SOLUTIONS 15' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
Wireless Solutions -30' TWS400 Jumper NM - NM$57.03The TerraWave 400-07-07-P30' coaxial cable assembly uses 30 feet of TWS-400 antenna extension cable. This cable jumper assembly connects N-style Male (Male center pin) connectors to both ends. The TerraWave 30 foot coax cable assembly includes heat shrink. Learn More
-
Ventev - 5' TWS400 Jumper RPTNCF - RPTNCM$23.92WIRELESS 5' TWS-400 Antenna extension cable with RPTNC Female (F center pin) to RPTNC Jack (M center pin). Includes heat shrink.The jumper is an excellent substitute for Cisco # AIR-CAB005LL-R Learn More
-
Ventev - 10' RG142P Jumper NM - NM$66.36The Wireless Solutions RG142PNMNM-10 coaxial cable assembly uses 10 feet of RG142 plenum-rated cable. This cable jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 10 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Pulse / Larsen - Mini-UHF Male Crimp for RG58$4.32LARSEN Mini-UHF Male Crimp connector for RG58/U cable. Nickle finish. Teflon insulation. 50 ohm impedance. Learn More
-
Pulse / Larsen - Rubber Gasket, NMO, 3 Pack$6.62LARSEN rubber gasket for NMO coils. 3 per package. Learn More
-
Pulse / Larsen - 806-960 Mirage Antenna, White$66.53LARSEN 806-960 MHz Mirage low profile unity gain antenna. 100 watts. White. Order Motorola/NMO style mount and cable separately. Learn More
-
Pulse / Larsen - 806-896 MHz 3dB On Glass Antenna, Black$62.13LARSEN 806-896 MHz 3dB on glass antenna. Enclosed coil whip. Black finish. Includes 14' dual shield RG58 cable and Mini-UHF male connector. Learn More
-
Pulse / Larsen - NMO - UHF/F Mount Adapter$42.91LARSEN test mount adapter. Checks antenna feedline and radio at the same time. Screws onto NMO/Motorola style mount. UHF female connection. Learn More
-
Pulse / Larsen - 150-170 1/4 Wave Antenna w/ Spring, Black$37.86LARSEN 150-170 MHz wide band quarter wave black antenna with spring. Order Motorola style mount separately. Learn More
-
Pulse / Larsen - 450-470 3.4 dB NMO Collinear Mobile Antenna Only$40.52LARSEN 450-470 MHz NMO 200 watt 3.4dB gain collinear mobile antenna only. Order desired NMO mount separately. Learn More
-
-
Ventev - 10' TWS195 Jumper RPSMAF - RPSMAM$30.43WIRELESS Solutions 10' TWS-195 Antenna extension cable with RPSMA Female (F center pin) to RPSMA Jack (M center pin). Includes heat shrink. Learn More
-
Ventev - 6' RG142P Jumper NM - SMAM$46.23WIRELESS SOLUTIONS 6' RG142P Jumper. Made of RG142P with SMA Male (49275) and N Male (54680) on each end. Learn More
-
Wireless Solutions - 6' TWS240 Jumper NM - NM$24.75WIRELESS 6' TWS-240 Antenna extension cable with N Female to N Female. Includes heat shrink. Learn More
-
Ventev - 3' RGS142 Jumper NM - NM$38.66The Wireless Solutions RGS142NMNM-3 coaxial cable assembly uses 3 feet of RGS142 cable. This cable jumper assembly is fitted with N male (54680) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Pulse / Larsen - GPS with NMO Mount for 27-6000 MHz, No Connector$113.69LARSEN 3-5V 26dB GPS antenna with NMO for any NMO antenna in 27-6000MHz range. Direct mount 3/4" hole. Includes 17' RG174 (GPS) and 17' RG58 (NMO). No conn Learn More
-
TerraWave - TWS-240UFCoax Cable$1.08The TerraWave TWS-240UF UltraFlex low loss coaxial cable has a very flexible PVC jacket for use in mobile antenna applications. This braided coax cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. The 1/4 inch 50 Ohm coax cable has a stranded bare copper center conductor. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. This transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The braided coaxial cable is similar in size to RG8X cables and fits 240 type connectors. The TerraWave TWS-240 UltraFlex low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
Wireless Solutions -15' LMR240 Jumper NM - SMAM$51.30WIRELESS SOLUTIONS 15' LMR240 Jumper. Made of LMR240 with N Male (54919) end and SMA Male (55222) on the other. Learn More
-
Ventev - 20' TWS400 Jumper RPSMAF - RPSMAM$51.56WIRELESS SOLUTIONS 20' TWS-400 Antenna extension cable with RPSMA Female (F center pin) to RPSMA Jack (M center pin). Includes heat shrink. Learn More
-
Ventev - 3' LMR240 Jumper NM - NM$37.90The Wireless Solutions LMR240NMNM-3 coaxial cable assembly uses 3 feet of LMR-240 cable. This cable jumper assembly is fitted with N male (54919) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 4' RG142P Jumper NM - NM$37.11The Wireless Solutions RG142PNMNM-4 coaxial cable assembly uses 4 feet of RG142 plenum-rated cable. This cable jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 4 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 3' TWS195 Jumper NM - SMAM$23.40The TerraWave 195-07-18-P3' cable assembly connects an N-style plug to a SMA plug. This jumper assembly uses 3 feet of TWS-195 antenna extension cable. One end of the coax cable has an N Male (Male center pin) and the other a SMA Male (Male center pin).The TerraWave 3 foot cable jumper assembly includes heat shrink. Learn More
-
Pulse / Larsen - 0-3000 MHz, Magnet Mount, RG58/A, SMA-M$39.18The Larsen NMOMMRDSSMA vehicle antenna magnetic mount is for use with Motorola-style, NMO mobile antennas. This Motorola-style magnet mount provides temporary, easily removable mounts for mobile antennas. This high frequency 0-3000 MHz NMO mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna mount is constructed from a zinc alloy body plated with copper and nickel. The magnetic base has a protective coating that prevents damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style mobile antennas includes 12 feet of RG58A/U dual shield cable. SMA male connector is installed. Learn More
-
TerraWave - TWS-195Coaxial Braided Cable$0.65The TerraWave TWS-195 low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This low loss 50 Ohm coax cable features a foil shield and 90 percent braided shield. It has a polyethylene, gas-injected UV-resistant jacket. The low loss transmission line can be used in almost any application where handling characteristics, improved shield and low loss is required. The low loss coax cable has a comparable performance to RG142 cable and uses RG58 or RG142 connectors. The TerraWave TWS-195 low loss coax cable is available in bulk and is priced per foot. Learn More
-
Ventev - 10' TWS400 Jumper NM - NM$34.23The TerraWave 400-07-07-P10' coaxial cable assembly uses 10 feet of TWS-400 antenna extension cable. This cable jumper assembly connects a N-style Male (Male center pin) connectors to both ends.The TerraWave 10 foot coax cable assembly includes heat shrink. Learn More
-
Wireless Solutions - 6'LMR400 Jumper NM - NF$46.84The Wireless Solutions LMR400NMNF-6 coaxial cable assembly uses 6 feet of LMR-400 cable. This cable jumper assembly is fitted with an N female (44728) connector and an N male (14515) connector. The crimp connectors include heat shrink. This Wireless Solutions 6 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 3' RG142P Jumper NM - BNCM$38.41The Wireless Solutions RG142PNMBM-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and a BNC male connector. The crimp connectors include heat shrink.This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 2' RG142P Jumper NM - NM$28.03The Wireless Solutions RG142PNMNM-2 coaxial cable assembly uses 2 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 2 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
TerraWave - 3/8"TWS-400DB Direct Burial$1.43The TerraWave TWS-400DB direct burial coaxial cable contains a weatherproofing compound around the foil and braid allowing for continuous performance even if cable has sustained damage. The 3/8 inch 50 Ohm coax cable has a solid center conductor and UV-resistant jacket. This braided cable allows for a 1 inch bending radius for applications requiring greater flexibility. The TerraWave direct burial low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
TerraWave - TWS-195FR50 Ohm Coaxial Braided Cable$0.78The TerraWave TWS-195FR-M coaxial cable (black) features a non-halogen, low smoke, fire-retardant cable designed for in-building applications. The TWS-195 cable is MSHA approved for mining operations. This low loss 50 Ohm coax cable features a 90 percent braided shield. The TWS-195 transmission line can be used in almost any application where handling characteristics, improved shield and low loss is required. The fire-retardant low loss coax cable has a comparable performance to RG142 cable and uses RG58 connectors. The TerraWave fire-retardant TWS-195 low loss coax cable is available in bulk and priced per foot. Learn More
-
Ventev - 5' LMR400 Jumper NM - NM$45.60The Wireless Solutions LMR400NMNM-5 coaxial cable assembly uses 5 feet of LMR-400 cable. This cable jumper assembly is fitted with N male (14515) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 5 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Wireless Solutions - 2'TWS400 Jumper NM - NM$22.67WIRELESS SOLUTIONS 2' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
Ventev - 20' TWS400 Jumper NM - NM$47.86The TerraWave 400-07-07-P20' coaxial cable assembly uses 20 feet of TWS-400 antenna extension cable. This cable jumper assembly connects N-style male (Male center pin) connectors to both ends.The TerraWave 20 foot coax cable assembly includes heat shrink. Learn More
-
Ventev - 3' RG142P Jumper NM - NF$33.65The Wireless Solutions RG142PNMNF-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and an N female connector. The crimp connectors include heat shrink. This Wireless Solutions cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 1' RG58 Jumper NF - Mini-UHFM$29.41WIRELESS SOLUTIONS 1' RG58 Jumper. Made of RG58 with N Female (83032) on one end and Mini UHF Male (43139) on the other. Learn More
-
Ventev - 3' LMR400UF Jumper NM - NM$44.46WIRELESS SOLUTIONS 3' LMR400UF Jumper. Made of LMR400UF with N Male (14515) on each end. Learn More
-
Ventev - 2' TWS195 Jumper NF(B) - SMAM$25.40WIRELESS Solutions 2' TWS-195 Antenna extension cable with N-Style Bulkhead Jack (F) to SMA Female (M). Includes heat shrink. Learn More
-
Ventev - 3' Jumper-SCF12 NM-NF$95.54tessco Jumper Assembly. 3' long. Made of Cablewave SCF12-50J 1/2" Superflexible cable. N Male omni fit connector on one end and omni fit N Female on the other. Learn More
-
3/8" 400 Series 50 Ohm Coax Cable$1.15TWS-400 braided coaxial cable is low loss. This 3/8 inch 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. Generic for LMR-400 Learn More
-
Ventev - 1/2" TWS-600 50 Ohm Coaxial Braided Cable$2.10The Ventev TWS-600 1/2 inch standard braided coax cable with foam dielectric has a UV-resistant polyethylene jacket for outdoor use. This low loss 50 Ohm coax cable is designed with a stranded outer conductor with a copper-clad aluminum center conductor. Maximum frequency capacity is 10.3 GHz. The Ventev 1/2 inch braided coaxial cable is available in bulk and is priced per foot. Learn More
-
Ventev - 6' TWS400 Jumper NM - NM$30.79The TerraWave 400-07-07-P6' cable assembly connects an N-style plug to a SMA plug. This jumper assembly uses 6 feet of TWS-400 antenna extension coaxial cable. This coax cable has N Male (Male center pin) connectors installed on both ends.The TerraWave 6 foot cable jumper assembly includes heat shrink. Learn More
-
Pulse / Larsen - Trunk Gutter Mount, NMO, RG58/U$30.45LARSEN trunk gutter mount for use with NMO antennas. Stainless steel "L" bracket fastens with three screws. Includes 17'RG-58/U cable & connector. Learn More
-
Ventev - 1' TWS195 Jumper NM - NM$17.88WIRELESS Solutions 12" TWS-195 Antenna extension cable with N Plug (M center pin) to N Plug (M center pin). Includes heat shrink. Learn More
-
Pulse / Larsen - 144-174 Antenna w/ Mount, UHF-M (Loose)$56.38The Larsen NMO150BK base-loaded VHF mobile antenna operates within the frequency range, 144-174 MHz. This 51.5 inch whip antenna features a gain of 3 dBd. The vehicle antenna includes a 3/4 inch hole mount, 17 feet of RG58A/U cable and a loose UHF male connector for vehicle installation. Learn More
-
TerraWave - LMR 100 type 50 Ohm Coaxial Cable$0.57 As low as $0.50The TerraWave TWS-100 braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. Learn More
-
TerraWave - TWS-200Coax Cable$0.61The TerraWave TWS-200 flexible low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This low loss50 Ohm coax cable features a 90 percent coverage shield. It has a solid copper center conductor, stranded outer conductor, and polyethylene foam insulation. The transmission line features a PVC jacket with un-bounded aluminum tape allowing end stripping with automated cable prep tools. While designed for mobile antenna applications, it can be used in almost any application where handling characteristics, improved shield and low loss is required. The low loss coax cable has a comparable performance to RG142 cable and uses RG58 or RG142 connectors. The TerraWave TWS-200 low loss coax cable is available in bulk and sold per foot. Learn More
-
Ventev - 2' TWS195 Jumper NM - SMAM$22.96The TerraWave 195-07-18-P2' coaxial cable assembly uses 2 feet of TWS-195 antenna extension cable. This cable jumper assembly connects an N-style male (Male center pin) to a SMA Male (Male center pin).The TerraWave 2 foot coax cable assembly includes heat shrink. Learn More
-
Ventev - 2' TWS195 Jumper RPTNCF - RPTNCM$25.42The TerraWave 195-01-02-P2' coaxial cable assembly uses 2 feet of TWS-195 antenna extension coax cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC Female (Male center pin).The TerraWave 2 foot coax cable assembly includes heat shrink. Learn More
-
Ventev - 3' LMR240 Jumper NM - SMAM$33.87WIRELESS SOLUTIONS 3' LMR240 Jumper. Made of LMR240 with N Male (54919) on one end and SMA Male (55222) on the other end. Learn More
-
Ventev - 15' TWS400 Jumper RPTNCF - RPTNCM$36.84WIRELESS 15' TWS-400 Antenna extension cable with RPTNC Female (F center pin) to RPTNC Jack (M center pin). Includes heat shrink. Learn More
-
Ventev - 18" TWS100 Jumper NF(B) - NM$27.75WIRELESS SOLUTIONS 18" TWS-100 Antenna extension cable with N Bulkhead Female (F center pin) to N Plug (M Center pin). Includes heat shrink. Learn More
-
Pulse / Larsen - 800-866 NMO Collinear Mobile, Black$46.43LARSEN 800-866 MHz NMO collinear mobile antenna. 3.4dB gain, 200 watts. Order Motorola style mount separately. Black. Learn More
-
Pulse / Larsen - 40-50 MHz NMO Loading Coil, Black$40.80LARSEN 40-50 MHz NMO black loading coil only. Learn More
-
Pulse / Larsen - 806-866MHz 8dBi 4 Element Yagi Antenna$138.42Larsen YA6800W yagi directional antenna is designed for high performance and long life in the most demanding applications. Larsen's black-finished welded yagi directional antenna is a 4-element antenna with 8 dBi directional gain and operates within a frequency range of 806 - 866 MHz. The maximum power input is 300 watts and the antenna is terminated with an N Female connector. The convenient U-bolt mounting hardware for pipes up to 2 inch makes installation easy and are included.This yagi antenna uses a rugged, fully-welded design that is strengthened by aluminum alloys and completely weatherized. Learn More
-
Ventev - 3' RG142P Jumper NM - TNCM$36.22The Wireless Solutions RG142PNMTM-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double shielded cable. This cable jumper assembly is fitted with an N male connector and a TNC male connector. The crimp connectors include heat shrink. This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Pulse / Larsen - NMO Style Magnet Mount w/ BNC Connector$35.06LARSEN 0-3000 MHz NMO magnet mount. Includes 12' RG58A/U cable and installed BNC connector. Learn More
-
Wireless Solutions - 6'LMR400 Jumper NM - NM$47.69The Wireless Solutions LMR400NMNM-6 coaxial cable assembly uses 6 feet of LMR-400 cable. This cable jumper assembly is fitted with N male (14515) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 6 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Pulse / Larsen - 152-162 1/4 Wave Antenna, Chrome, Pre-Tuned$16.15LARSEN 152-162 MHz unity gain 1/4 wave chrome pre-tuned antenna. Order NMO/ Motorola style mount separately. Learn More
-
Ventev - 3' RG142P Jumper BNCM - BNCM$72.51WIRELESS SOLUTIONS 3' jumper w/ double shielded RG142P cable. 3' long with an crimp BNC males on each end. Learn More
-
Ventev - 10' LMR400 Jumper NM - NM$56.06The Wireless Solutions LMR400NMNM-10 coaxial cable assembly uses 10 feet of LMR-400 cable. This cable jumper assembly is fitted with N male (330822) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 10 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 2' RG142P Jumper NM - BNCM$30.74The Wireless Solutions RG142PNMBM-2 coaxial cable assembly uses 2 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and a BNC male connector. The crimp connectors include heat shrink. This Wireless Solutions 2 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Larsen - 0-3000 MHz,Magnet Mount, RG58A/U, Mini UHF$34.89The Larsen NMOMMRMPL vehicle antenna magnetic mounti for use with Motorola-style mobile antennas. This Motorola-style magnet mount provides temporary, easily removable vehicle mounting for mobile antennas. This high frequency 0-3000 MHz magnet mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna vehicle mount is constructed from a zinc alloy body plated with copper and nickel that is black coated. The magnetic base has a protective coating designed to prevent damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style antennas includes 12 feet of RG58A/U cable. Mini UHF male connector is installed. Learn More
-
Ventev - 3' TWS195 Jumper NM - RPSMAM$9.83WIRELESS Solutions 3' TWS-195 Antenna extension cable with N Female (M Center Pin) to RPSMA Female (F center pin). Includes heat shrink. Learn More
-
Ventev - 18" TWS100 Jumper RPTNCF(B) - RPTNCM$11.22The TerraWave 100-02-03-P18" coaxial cable assembly uses 18 inches of TWS-100 antenna extension cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC bulkhead Female (Male center pin).The TerraWave 18 inch coax cable assembly includes heat shrink. Learn More
-
Pulse / Larsen - 136-512 NMO 1/4 Wave Antenna Only$21.03LARSEN 136-512 MHz NMO quarter wave mobile antenna only. Order desired NMO 3/4" mount separately. Learn More
-
Larsen - 40-50 MHz BaseLoaded 1/4 Wave Antenna, Chrome$53.29LARSEN 40-50 MHz 200 watt base loaded unity gain 1/4 wave chrome mobile antenna. Purchase Motorola style mount separately. Learn More
-
Pulse / Larsen - 890-960MHz 11dBi 7 Element Yagi Antenna$138.64Larsen YA5900W yagi directional antenna is designed for high performance and long life in the most demanding applications. Larsen's black-finished welded yagi directional antenna is a 7-element antenna with 11 dBi directional gain and operates within a frequency range 890 - 960 MHz. The maximum power input is 300 watts and the antennas is terminated with an N Female connector. Stainless steel U-bolt mounting hardware for pipes up to 1-5/8 inch is included and makes installation easy.This yagi antenna uses a rugged, fully-welded design that is strengthened by aluminum alloys and completely weatherized. Learn More
-
Pulse / Larsen - UHF NMO Coil, Black$15.15LARSEN UHF coil. Use with appropriate whip for desired frequency. Black finish to match Kulrod T(TM) whips. Learn More
-
Pulse / Larsen - UHF Male PL259-RG58, 142$6.69LARSEN UHF male solder Female and UG175 adaptor for use on RG55, 58, 141 and 142 cables. Learn More
-
Pulse / Larsen - 0-1000 MHz, NMO 3/4" Mount w/ No Conn$22.74The Larsen NMOKMPL vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58/U cable and no connector. Thread size is 1 1/8 inch - 18. Learn More
-
Pulse / Larsen - Mag. Mount, 25'/ No Conn$61.57Motorola-style magnet bases provide temporary, easily removable mounts for antennas. Thread size 1-1/8"-18. Learn More
-
Ventev - SMA Female/Jack to TNC Male/Plug Adapter$9.92SMA Female/Jack to TNC Male/Plug Adapter for Changing Connector Styles Learn More
-
-
15' LMR300 Jumper NM - TNCM with special label$68.0815' LMR300 Jumper NM - TNCM with special label Learn More
-
Ventev / TerraWave - 6 dBi Left Facing Angled Handrail Antenna$677.086 dBi Left Facing Angled Handrail Antenna Learn More
-
-
132-850 1/4 Wave Antenna w/ Spring, Black$41.75132-850 1/4 Wave Antenna w/ Spring, Black Learn More
-
Pulse / Larsen - 144-174 NMO Loading Coil, black$21.97LARSEN 144-174 MHz NMO black loading coil only. Requires 19616 whip and NMO mount. Learn More
-
-
Pulse / Larsen - 144-174 NMO 5/8 Wave Antenna, Chrome$36.49The Larsen NMO150C base-loaded 5/8 wave antenna only operates within the VHF frequency range, 144-174 MHz. This vehicle antenna delivers high performance, with a gain of 3 dB (with ground plane). Maximum power input is 200 watts. The 49 inch whip antenna is field-tunable and includes a black coil with chrome whip. Order NMO mount for your Larsen VHF mobile antenna separately. Learn More
-
Pulse / Larsen - 806-896 1/4 Wave Antenna, Pre-Tuned, Chrome$16.15LARSEN 806-896 MHz quarter wave chrome pre-tuned antenna. Order NMO/ Motorola style mount separately. Learn More
-
-
Pulse / Larsen - 0-1000 MHz, NMO 3/4" Mount/ Mini UHF$19.02The Larsen NMOKMPL vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58A/U cable and mini UHF connector. Thread size is 1 1/8 inch - 18. Learn More
-
Pulse / Larsen - 0-3000 MHz Magnet Mount, RG58A/U, FME$34.88LARSEN 0-3000 MHz magnet mount. Includes 12' RG58A/U and FME connector 3 1/4" in size and motorola style mount. Learn More
-
Ventev - 75' TWS400 Jumper NM - NM$90.46WIRELESS SOLUTIONS 75' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
TerraWave - TWS-240 50Ohm Coax Cable$0.72The TerraWave TWS-240 low loss coaxial cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. This 50 Ohm coax cable has a solid copper center conductor and stranded outer conductor for a 3/4 inch bending radius. Low loss is achieved because of the 90 percent braided shield. A foam polyethylene serves as insulation. The TWS-240 transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The braided coaxial cable is similar in size to RG8X cables and fits 240 type connectors. The TerraWave TWS-240 low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
Wireless Solutions - 4' TWS400 Jumper NM - NM$21.20WIRELESS SOLUTIONS 4' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
Ventev - 5' TWS195 Jumper RPTNCF - RPTNCM$20.91The TerraWave 195-01-02-P5' coaxial cable assembly uses 5 feet of TWS-195 antenna extension coax cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC Female (Male center pin).The TerraWave 5 foot coax cable assembly includes heat shrink. Learn More
-
Ventev - 10' TWS400 Jumper RPTNCF - RPTNCM$33.40WIRELESS 10' TWS-400 Antenna Extension Cable with RPTNC Female (F, 416952) to RPTNC Jack (M, 440939). Includes Heat Shrink. Learn More
-
Ventev - 18" TWS100 Jumper RPTNCF - RPTNCM$31.31WIRELESS SOLUTIONS 18" TWS-100 Extension Cable with RPTNC Jack (M Center Pin) to RPTNC Female (F Center Pin). Includes Heat Shrink. Learn More
-
Ventev - 2' LMR200 Jumper NM - SMAM$32.29WIRELESS SOLUTIONS 2' LMR200 Jumper. Made of LMR200 with N Male (92978) on one end and SMA Male (RSA_3000-C2) on the other end. Learn More
-
TerraWave - TWS-240FR50 Ohm Coaxial Cable$1.35The TerraWave TWS-240FR-M low loss coaxial cable is a non-halogenated, low smoke, fire-retardant cable designed for in-building applications. This braided coax cable offers similar performance compared to corrugated copper cables but provides high flexibility and simplified connectorization. This 50 Ohm coax cable has a solid bare copper center conductor and stranded outer conductor. Low loss is achieved through use of the 90 percent braided shield. A foam polyethylene serves as insulation. This braided coax cable is UL, MSHA, CATV, and CL2 listed. The transmission line can be used in almost any application where handing characteristics, improved shielding, and low loss is required. The fire-retardant cable is similar in size to RG8X cables and fits 300 style connectors. The TerraWave TWS-240FR-M fire-retardant low loss coaxial cable is available in bulk and is priced per foot. Learn More
-
Ventev - 3' TWS240 Jumper NM - RPSMAM$22.31WIRELESS SOLUTIONS 3' TWS-240 Antenna extension cable with N-Style Male (M) to RP SMA Male (M, F). Includes heat shrink. Learn More
-
Wireless Solutions - 5'TWS400 Jumper NM - NM$15.75WIRELESS SOLUTIONS 5' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
Ventev - 75' TWS600 Jumper NM - NM$191.79WIRELESS SOLUTIONS 75' TWS-600 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More
-
Pulse / Larsen - Gasket, NMO/Super Seal, 3 Pack$6.35LARSEN Super seal gasket for NMO mount. 3 per package. Learn More
-
Ventev - 18" TWS100 Jumper RPTNCF(B) - RARPTNCM$12.90The TerraWave 100-02RA-03-P18L coaxial cable assembly uses 18 inches of TWS-100 antenna extension cable. This cable jumper assembly connects a right angle RP-TNC Male (Female center pin) to a RP-TNC long bulkhead Female (Male center pin).The TerraWave 18 inch coax cable assembly includes heat shrink. Learn More
-
Ventev - 3' TWS400 Jumper NM - NM$26.44The TerraWave 400-07-07-P3' coaxial cable assembly uses 3 feet of TWS-400 antenna extension coax cable. This cable jumper assembly connects a N-style Male (Male center pin) connector to both ends.The TerraWave 3 foot coax cable assembly includes heat shrink. Learn More
-
Ventev - 6' LMR240 Jumper NM - SMAM$38.23WIRELESS SOLUTIONS 6' LMR240 Jumper. Made of LMR240 with N Male (54919) on one end and SMA Male (55222) on the other Learn More
-
Ventev - 6' RG142P Jumper NM - NM$44.50The Wireless Solutions RG142PNMNM-6 coaxial cable assembly uses 6 feet of RG142 plenum-rated cable. This jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink.This Wireless Solutions 6 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 3' LMR240 Jumper SMAM - SMAM$29.87WIRELESS SOLUTIONS 3' LMR240 Jumper. Made of LMR240 with SMA Male (55222) connectors on each end. Learn More
-
Ventev - 3' LMR400LLPL Orange Jumper NM - NM$72.21The Wireless Solutions LMR400LLPLNMNM-3 coaxial cable assembly uses 3 feet of orange LMR-400-LLPL cable. This cable jumper assembly is fitted with N male (14515) connectors on each end. The crimp connectors include heat shrink.This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More
-
Ventev - 3' TWS195 Jumper NM - NM$25.51Wireless Solutions 3' TWS195 Jumper. Made of TWS195 with N Male (36421) connectors on each end. Learn More
-
Ventev - DIN Rail Clipfor SunSaver Controller$2.12VENTEV DIN Rail Clip for SunSaver Controller. Mounts to 35mm rail. Includes screws, order 2 per controller. Learn More
-
Wireless Solutions - 3'TWS240 Jumper NM - NM$15.97WIRELESS SOLUTIONS 3' TWS-240 Antenna extension cable with N-Style Female (M) to N-Style Female (M). Includes heat shrink. Learn More
-
Ventev - 6' RG142P Jumper NM - SMAM Rt. Angle$59.61WIRELESS SOLUTIONS 6' Jumper. Made of double shielded RG142P cable. Crimp N male to crimp SMA Male right angle. Learn More
-
Pulse / Larsen - 698-960/1710-2700 MHz Shadow NMO Transit Ant, Blk$32.97LARSEN 698-960/1710-2700 MHz Shadow Low Profile Transit antenna. NMO mountable. 2 dBi gain, Black color. Requires an NMOHF (high frequency) mount. Learn More
-
Ventev - 2' TWS240 Jumper NM - NM$18.71WIRELESS SOLUTIONS 2' TWS-240 Antenna extension cable with N-Style Female (M) to N-Style Female (M). Includes heat shrink. Learn More
-
TerraWave - 3/8"TWS-400FR 50 Ohm Braided Coaxial Cable$1.87The TerraWave TWS-400FR-M flexible low loss coaxial cable is a non-halogenated, low smoke, fire-retardant cable designed for in-building applications. This 3/8 inch, 50 Ohm coax cable has a 90 percent braid shield for low loss. The black fire-retardant polyethylene jacket is MSHA approved. The braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility, simplified connectorization, and a fire-retardant jacket. It can be used in almost any application where handling characteristics, improved shielding and low loss is required. The TerraWave TWS-400FR-M low loss fire-retardant coax cable is available in bulk and is priced per foot. Learn More
-
-