Tools
-
Times Microwave Systems - LMR-195 and LMR-200 Cable Prep Tool$135.50LMR-195 and LMR-200 Cable Prep Tool Learn More
-
Wiha Tools - Hex Bit Handle, 1/4" , magnetic tip$24.73WIHA 1/4" hex bit handle driver. Holds standard 1/4" hex bits. featuers nonslip handle with chrome vanadium steel blade. Magnetic tip. Learn More
-
RF Industries - RG174 Die Set for RFA4005 .068/.130/.178$32.61RF Industries 3-cavity die set is for universal cable crimp tool frames only. This 3-cavity die set crimps to 0.068, 0.130, and 0.178 inches. The interchangeable die set for the RFA-4005 crimping tool is for coax cable types RG174/U, RG188/U, RG316/U, Mini59/U and LMR100. Hex dies are precision die cast to provide long service use and are easily changeable. Learn More
-
RF Industries - Crimp Tool Kit Crimps RG58,59, Proflex,8,214$200.71RF Industries coax cable crimp tool kit allows you to terminate most coaxial and datacom connectors for RG58, RG59, Proflex, RG8, and RG214 among other cables. The crimp tool kit includes a cable crimper along with two die sets. Die set one crimps to the following sizes: square 0.052 inch and hex 0.068, 0.100, 0.213, and 0.255 inches. Die set two crimps to the following sizes: hex 0.100, 0.128, and 0.429 inches. The ergonomically-designed cable crimping tool will last over 50,000 crimp cycles. A handy chart inside the lid indicates which interchangeable die is correct for the particular cable you are working with. Dies are precision die cast to provide long field service use and are easily changed. Learn More
-
RF Industries - Strip Tool, LMR400, RG214, N Male$62.51RF Industries cable stripper easily cuts jacket, braid and dielectric in one step. This strip tool quickly prepares LMR 400 type cables. The coax three-level stripper preps a wide variety of popular cables including LMR 400, RG 214, RG 8, RG 213, Belden 9913, and Cushcraft 93605. RF Industries coax stripper is designed to prevent over-penetration and cable distortion. Strip lengths are manufactured to industry standards. Learn More
-
RF Industries - Crimp Tool Kit: 2 Universal Frames & 2 Die sets$248.05RF Industries cable crimp tool kit allows you to terminate most coaxial and datacom connectors for RG58, RG59, Proflex, RG8, and RG214 among other cables. The crimp tool kit includes two cable crimper along with two die set. Die set one crimps to the following sizes: square 0.052 inch and hex 0.068, 0.100, 0.213, and 0.255 inches. Die set two crimps to the following sizes: hex 0.100, 0.128, and 0.429 inches. The ergonomically-designed crimping tool will last over 50,000 crimp cycles. A handy chart inside the lid indicates which interchangeable die is correct for the particular cable youre working with. Dies are precision die cast to provide long field service use and are easily changed. Learn More
-
Times Microwave Systems - LMR-240 Prep Tool for virtually all connectors$132.21TIMES MICROWAVE All-In-One Combination Prep Tool for prep of LMR240 cables for crimp or clamp connectors. Learn More
-
Wiha Tools - TORX(r) T-6 Power Drive Bit , 2" OAL$17.42WIHA TORX(r) T-6 Power Drive Bit with Tapered Shank 2"OAL Learn More
-
Wiha Tools - Security Bits Set, 39pc$104.66WIHA Security Insert Bit Set. 39 pieces including TORX(r), Tri-wing, Torq-set, Spanner, Tamper Resistant Hex, Slotted, Phililps, Pozidriv & Square bits Learn More
-
RF Industries - Master Crimp Kit for terminals, modular & coax$704.02RF Industries master engineer and technician cable crimp kit includes two crimp handles and 22 interchangeable die sets all in a convenient foam-lined plastic case. This crimping tool kit allows you to crimp coaxial cable from RG174/U to LMR400, insulated and non-insulated terminals and lugs, along with a wide range of modular plugs. The cable crimper frames included in the crimp kit are ratcheting crimpers. Learn More
-
Times Microwave Systems - LMR400 Cable Preparation Tool Kit$431.71The Times Microwave TK-400EZ 4-piece coax cable preparation tool kit includes the necessary tools for installing crimp connectors on LMR400 cables. This cable preparation tool kit contains the appropriate cable cutter, strip tool, crimp tool with die, and tool bag. Learn More
-
Times Microwave Systems - LMR300 & 400 Crimp Tool, .324" & .429"$187.03Times Microwave ratcheting crimper for LMR300 and LMR400 cables with corresponding crimp-style connectors has a fixed die set. The die set has 2-cavities, crimping to 0.324 and 0.429 inch hex. This cable crimper is rated at 50,000 cycles.Yellow handles make this cable crimping tool easy to locate. Learn More
-
Times Microwave Systems - Crimp Tool/LMR100, 195, 200 & 240$206.48Times Microwave crimper for LMR100, LMR195, LMR200, and LMR240 cables has a fixed die set. The die set has 3-cavities, crimping to 0.128, 0.213, and 0.255 inch hex. This cable crimper attaches corresponding LMR crimp-style connectors to LMR coaxial cables. Yellow handles make this cable crimping tool easy to locate. Learn More
-
Times Microwave Systems - Deburring Tool for all TMW Cable$85.82Times Microwave deburring tool DBT-U is ideal for all Times Microwave cable. The coaxial cable installation tool will deburr the center conductors on LMR195 through LMR600 coax cables making attachment of EZ style connectors a snap. This coax cleaning tool deburrs center conductors from 0.2 to 0.4 inches. The large blue screwdriver type handle provides leverage while rotating for easy use. Learn More
-
Times Microwave Systems - LMR-400 Prep Tool for virtually all connectors$128.54Times Microwave combination manual cable preparation tool is made for use with 3/8 inch LMR-400 coaxial cable using crimp and clamp-style connectors. This cable hand prep tool joins a cable stripper tool and a cable trimming tool into one easy-to-use devicePrepare LMR-400 coax cable in two simple steps. First, insert the cable into side one, twist, cut, and expose the center conductor. Second, flip the tool around and insert the cable into side two. Twist and turn to expose the coax braid. This cable preparation tool has a built-in deburr tool and works with nearly all LMR-400 connectors. Learn More
-
Times Microwave Systems - CST series Repl blades$64.99TIMES MICROWAVE LMR Cable Preparation Tool Blades for CST series prep tools. Learn More
-
RF Industries - Crimp Frame & Die 3 Cavity: .100"/.128"/.429"$88.31RF Industries cable crimp tool kit includes die set with 0.100, 0.128, and 0.429 inch cavities. This crimping tool with die sets will crimp RG8, Belden 9913, Ultraflex and Andrew braided coaxial cables. The cable crimper kit is compatible with connector type N 50 Ohm. Dies are composed of a fine blanked, high carbon tool steel. The cable crimping tool frame features an ergonomic molded finger and palm grip for easy use. Learn More
-
RF Industries - UNIVERSAL Crimp Tool Frame Only$59.32RF Industries universal cable crimp tool frame is compatible with RFA4005 and RFA4006 dies. This replacement crimp handle is ergonomically designed. The universal die frames are easily changed using either a Phillips or Standard screwdriver. Learn More
-
RF Industries - RG-8, 11, 213, 214/U, 9913, 9914 Adj. Strip tool$58.45RF Industries coaxial cable stripper has an adjustable blade for larger coax and telephone cables. This zinc diecast strip tool is designed to prep a variety of coaxial cables including RG 8, RG 11, RG 213, RG 214/U, 9913, and 9914. RF Industries coax stripper prevents cable distortion. Learn More
-
RF Industries - Crimp Tool Kit Crimps .042 to .429$414.28RF INDUSTRIES crimping tool kit. Includecrimp handle & 10 sets of dies. Phillip screwdriver is all you need to change dies. Crimps hex .042 to .429" Learn More