Tools
-
Times Microwave Systems - LMR-195 and LMR-200 Cable Prep Tool$135.50LMR-195 and LMR-200 Cable Prep Tool Learn More
-
CommScope - Flare Tool for 1/2" coaxial cable$68.75The Andrew 224363 cable flare tool is designed for use on LDF4 cables. This cable flare tool is designed to separate foam from the outer conductor of 1/2" coaxial cable. Learn More
-
CommScope - 7/8" AVA-5 Automated Prep Tool$791.70Andrew Solutions EZfit automated coax cable coring and stripping preparation tool is made for use with AVA5 HELIAX 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently. This drill-driven coring tool also includes a T-handle for manual hand operation.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. For fast, clean, and consistent cable preparations go with Andrew Solutions EZfit drill-driven automated cable preparation tools. Learn More
-
CommScope - Torque Wrench, 13/16", N-Connector Coupling Nut$125.22ANDREW 13/16" torque wrench for Type-N Coupling Nut for Andrew Cable.Audible click when the proper torque has been reached. 20 Inch Pounds,Tolerance -5/+0 Learn More
-
CommScope - Torque Wrench, 1-1/4", 7-16 DIN Coupling Nut$119.27ANDREW 1-1/4" torque wrench for 7-16 DIN coupling nut. Designed w/ a mechanism to audibly notify the installer that proper torque has been reached. Learn More
-
CommScope - Combination Tool for 1/2" and 7/8" Cable$101.55The Andrew CT-7812 combination tool aids in field installation of connectors on 1/2 and 7/8 inch coax cables. The Andrew combination tool / combination wrench features open wrench ends, chamfer tool, file, inner conductor gauge, and jacket cut-off gauge.Works with Heliax 2.0 and Positive Stop connectors. Learn More
-
-
Times Microwave Systems - LMR-240 Prep Tool for virtually all connectors$132.21TIMES MICROWAVE All-In-One Combination Prep Tool for prep of LMR240 cables for crimp or clamp connectors. Learn More
-
CommScope - 1/2" LDF4-50 Easiax Prep Tool$26.73Andrew Solutions EASIAX manual cable preparation tool is made for use with 1/2 inch HELIAX coaxial cable, including: LDF4-50, HL4RP-50 and RXL4 series inch foam dielectric cables. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More
-
CommScope - ANDREW Replacement Blade Kit$84.46Andrew Solutions replacement blade kit is made for use with: CPT-L4ARC1, CPT-L45ARC, CPT-E2L2N, and CPT-E2L2DIN automated cable prep tools. Each blade kit contains four blades. The blade life lasts up to 150 cable preparations.Be prepared. Damaged or dull blades cause inconsistent cuts and can slow, or even stop, an installation. A cable preparation tool performs best with a sharp blade. Andrew Solutions replacement blade kit ensures consistent, clean, and quick cable preparation. Learn More
-
CommScope - SnapStak Hanger Tool$74.18ANDREW SnapStak Hanger Tool for installation and removal of SnapStak snap-in hangers. Learn More
-
CommScope - EASIAX Plus Automated Cable Preparation Tool$324.66Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More
-
CommScope - Easiax Replacement Blades$12.37COMMSCOPE Replacement Blade Kit for 470164 (MCPT-1412) and 411530 (MCPT-3812) cutting tools. Learn More
-
CommScope - Automated tool FSJ4-50B$166.70Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with FSJ4-50B HELIAX 1/2 inch version-two connectors. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More
-
CommScope - 7/8" Easiax Prep Tool AVA5-50, LDF5-50A$39.24Andrew Solutions EASIAX manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including: AVA5, LDF5, and VXL5. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More
-
CommScope - 3/8" & 1/2" Superflex Prep Tool$28.85Andrew EASIAX manual cable preparation tool is made for use with 3/8 inch and 1/2 inch superflex HELIAX coaxial cables, including: FSJ2, FSJ4, ETS2, RXL2 and RXL4. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew EASIAX cable preparation tools. Learn More
-
Times Microwave Systems - LMR400 Cable Preparation Tool Kit$431.71The Times Microwave TK-400EZ 4-piece coax cable preparation tool kit includes the necessary tools for installing crimp connectors on LMR400 cables. This cable preparation tool kit contains the appropriate cable cutter, strip tool, crimp tool with die, and tool bag. Learn More
-
Times Microwave Systems - LMR300 & 400 Crimp Tool, .324" & .429"$187.03Times Microwave ratcheting crimper for LMR300 and LMR400 cables with corresponding crimp-style connectors has a fixed die set. The die set has 2-cavities, crimping to 0.324 and 0.429 inch hex. This cable crimper is rated at 50,000 cycles.Yellow handles make this cable crimping tool easy to locate. Learn More
-
Times Microwave Systems - Crimp Tool/LMR100, 195, 200 & 240$206.48Times Microwave crimper for LMR100, LMR195, LMR200, and LMR240 cables has a fixed die set. The die set has 3-cavities, crimping to 0.128, 0.213, and 0.255 inch hex. This cable crimper attaches corresponding LMR crimp-style connectors to LMR coaxial cables. Yellow handles make this cable crimping tool easy to locate. Learn More
-
CommScope - 1/2" Corrugated Coax Automated Prep Tool$269.67Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with LDF4-50A HELIAX 1/2 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More
-
CommScope - Torque Wrench for coupling of 4.3-10 connectors$113.27COMMSCOPE Torque Wrench for coupling torque of 4.3-10 connectors. 22 mm opening. Learn More
-
Times Microwave Systems - Deburring Tool for all TMW Cable$85.82Times Microwave deburring tool DBT-U is ideal for all Times Microwave cable. The coaxial cable installation tool will deburr the center conductors on LMR195 through LMR600 coax cables making attachment of EZ style connectors a snap. This coax cleaning tool deburrs center conductors from 0.2 to 0.4 inches. The large blue screwdriver type handle provides leverage while rotating for easy use. Learn More
-
Times Microwave Systems - LMR-400 Prep Tool for virtually all connectors$128.54Times Microwave combination manual cable preparation tool is made for use with 3/8 inch LMR-400 coaxial cable using crimp and clamp-style connectors. This cable hand prep tool joins a cable stripper tool and a cable trimming tool into one easy-to-use devicePrepare LMR-400 coax cable in two simple steps. First, insert the cable into side one, twist, cut, and expose the center conductor. Second, flip the tool around and insert the cable into side two. Twist and turn to expose the coax braid. This cable preparation tool has a built-in deburr tool and works with nearly all LMR-400 connectors. Learn More
-
Times Microwave Systems - CST series Repl blades$64.99TIMES MICROWAVE LMR Cable Preparation Tool Blades for CST series prep tools. Learn More
-
CommScope - 7/8" Grounding Kit Prep Tool$268.06ANDREW Aluminum Grounding Kit Preparation Tool for 7/8" corrugated cable SG series grounding kits Learn More
-
CommScope - Cable flare tool for LDF5$77.89The Andrew 224368 cable flare tool is designed for use on LDF5 cables. This cable flare tool is designed to separate foam from the outer conductor of 7/8 inch coaxial cable. Learn More
-
RFS - Superflex Cable Preparation Trim Tool 1/2" Cable$761.54RFS Special trimming tool makes the OMNI FIT Premium D01 connector attachment easier. No further tools are required to prepare the cable for the connector attachment. This is due to the unique design of the trimming tool, which combines all necessary functions in one compact tool. It can be used for CELLFLEX SCF12-50 foam dielectric cables. Learn More
-
CommScope - 1/2" Grounding Kit Prep Tool, Aluminum$260.32ANDREW 1/2" Aluminum Ground Kit Strip Tool for LDF4-50 foam cable. Manually operated for SG Series. Learn More
-
CommScope - 1/2" Automated Prep Tool$269.60COMMSCOPE EASIAX Plus Automated Cable Preparation Tool for 1/2" coaxial cable. Learn More
-
CommScope - 1/4" & 1/2" Superflex Easiax Cable Strip Tool$24.80Andrew Solutions EASIAX manual cable preparation tool is made for use with 1/4 inch and 1/2 inch Superflex HELIAX coaxial cables, including FSJ1-50A and FSJ4-50B. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More
-
RFS - 1/2" Prep Tool, LCF12 and OMNI FIT Connectors$155.31This special trimming tool improves the cable preparation prior to connector attachment. No further tools are required to prepare the cable for the connector attachment. This is due to the unique design of the trimming tool, which combines all necessary functions in one tool. It can be used for all CELLFLEX LCF12-50 foam dielectric cables in combination with the OMNI FIT Premium connector family D01, OMNI FIT Standard family B32 and RAPID FIT families 060/062 + 070/072. The Universal Trimming Tools Series offers the additional advantage to be convertible to different connector families and cable sizes (1/4", 3/8", 1/2" and 7/8") only by changing the insert. Learn More
-
CommScope - 7/8" Cable Preparation Tool AVA5 and FXL-780$190.88Andrew Solutions EZfit CPTV2 series manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including AVA5 and FXL-780. Andrew cable hand prep tools prepare cable quickly and consistently.This cable stripper tool removes the cable jacketing and cores the cable foam. Plus, this cable cutting tool also flares the sheath for fast and clean connector attachment. This cable preparation tool includes one tool bit for AVA5 coaxial cable and one tool bit for FXL-780 coaxial cable. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EZfit Heliax 2.0 series manual cable preparation tools. Learn More
-
RFS - 1/2" Prep Tool, LCF12-50$455.37RFS TRIM-LCF12-D01-A is a Special trimming tool makes the OMNI FIT Premium D01 connector attachment easier. No further tools are required to prepare the cable for the connector attachment. This is due to the unique designof the trimming tool, which combines all necessary functions in one compact tool. It can be used for CELLFLEX LCF12-50 foam dielectric cables. Learn More