Mobile Devices & Accessories

The Gamber-Johnson 7160-0250 NotePad V universal computer mount features width (10.62 to 16.5 inches), depth (9.0 to 12.38 inches), and thickness (0.5 to 1.5 inches) adjustability to accommodate practically any laptop. The laptop cradle has curved hold-down clips along with front retainer and rear support brackets to secure your laptop even when traveling through rugged terrain. This vehicle computer mount is constructed of heavy gauge steel with a black powder-coat finish. The NotePad V computer mount comes with pre-drilled, threaded holes to align with any motion attachment (not included). The multiple mounting holes allow the laptop mount to be offset to avoid other equipment if necessary. The Gamber-Johnson NotePad V universal computer cradle is a rugged and adjustable option for your mobile computing needs. Learn More

LAIRD 450 - 470 MHz Black, Elastomer Spring Mobile Coil Antenna, 3 dBi. Learn More

The Havis 1/2" Filler Plate. Learn More

The Havis 2" Filler Plate. Learn More

LAIRD 3/4" hole stainless steel black trunk groove bracket with screws. Order LAIRD all brass 3/4" hole mount, cable and connector separately. Learn More

The PCTEL Maxrad BGMPL mini magnetic mount is a Motorola-style, NMO mobile antenna mount that offers removability and a smaller magnet diameter. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust. The vehicle antenna mount thread size is 1-1/8 inch - 18, and the magnetic base is 2 3/8 inch. The magnetic base features 60 pounds of pull strength eliminating the fear of disconnect.This PCTEL black vehicle mini-magnet mount for mobile antennas operates within 0 - 1000 MHz and includes 12 feet RG58/U cable. Mini UHF connector is included but not installed. Learn More

MAXRAD 47-50 MHz, 200 watt, base loaded quarter wave antenna with spring. Tinned copper wire wound on a low-loss coil form. Learn More

GAMBER JOHNSON Universal Adapter to use between any Screen/Display or Docking Station with a 75mm or 100mm VESA, NEC, AMPS, Havis, Jotto or PMT hole pattern and any Gamber-Johnson Motion Attachment. Dimensions: 0.97" H x 5.0" W x 5.0" D. Adapter plate includes pems for easy installation as well as 2" x 4.09" hole pattern.The adapter plate can be mounted to flat surfaces and is ideal for cart or wall mounted applications.Built in cable restraint points for service loops.Lightweight, yet rugged construction for durable, long lasting useAdapter bracket plates are fastened by QTY 4 4-1/2 20 Hex Washer Head bolts. This allows for easy installation to the dock, cradle or display as well as the surface or motion attachment Hole patterns include: Vesa 75mm and 100mm, NEC and AMPS, Havis, Jotto, and PMT Learn More

The PCTEL MHB5800S base-loaded 5/8 wave antenna with spring operates within the VHF frequency range, 144-174 MHz. This VHF mobile antenna delivers high performance, with a gain of 3 dB. Maximum power input is 200 watts. This 58 inch whip antenna utilizes a chrome coil design with the enhancements of a heavy-duty tapered rod for maximum durability in tough environments. Order NMO mount separately. Learn More

The PCTEL Maxrad BMATM338 vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-1000 MHz in thick surfaces. This brass permanent mount is for a 3/8 inch hole in mounting surfaces 1/32 to 1/2 an inch thick. The PCTEL mobile antenna vehicle roof mount includes a solder lug connection but no cable. Thread size is 1 1/8 inch - 18. Learn More

The PCTEL Maxrad MTPM800 vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-2900 MHz in thick surfaces. This permanent mount is for a 5/8 inch hole in mounting surfaces. It can be used with thick mounting plates.The PCTEL mobile antenna mount requires cable and connector. Thread size is 1 1/8 inch - 18. Learn More

The Larsen NMOKNOCONN vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58A/U cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

LARSEN rain cap for NMO mount. Black only. Learn More

MAXRAD 380-520 MHz wideband antenna with spring. 150 watts. 2 dB gain with ground plane, 0 dB without ground plane. Order Motorola mount separately. Learn More

LAIRD 2400-2500 MHz Phantom 3dB gain permanent mount NO GROUND antenna. Base secures with locknut. Accepts N male connector. White. Learn More

MAXRAD 47-54 MHz, 200 watt, base loaded quarter wave antenna only. Order desired Motorola style mount separately. Unity gain. Learn More

LARSEN 806-960 MHz Mirage low profile unity gain black antenna. 100 watts. Order Motorola/NMO style mount and cable separately. Learn More

The Laird GB8U magnetic antenna mount is a Motorola-style mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18. The black NMO mount includes 12 feet of RG58/U cable. No connector is included.The Laird black vehicle magnet mount is designed for use with Motorola-style mobile antennas up to 1000 MHz. Learn More

LAIRD 144-152 MHz Unity gain 1/4 wave black antenna. Brass button contact provides a superior match at feedpoint. Order mount separately. Learn More

MAXRAD 450-512 MHz Low Profile Verticle unity gain antenna. Black over black base. 3 3/8" high. Order Motorola style mount separately. Learn More

MAXRAD 450-470 MHz 5/8 wave, 200 watt, 3dB gain. No spring. Order desired Motorola type mount separately. Learn More

The PCTEL Maxrad BMA-NC vehicle roof mount antenna installation hardware kit is an NMO mount for Motorola-style mobile antennas 0-1000 MHz. This brass permanent mount is for a 3/8 or 3/4 inch hole (from below) in mounting surfaces. The PCTEL mobile antenna mount includes 17 feet of RG58/U cable but no connector. Thread size is 1 1/8 inch - 18. Learn More

LARSEN 150-170 MHz wide band quarter wave chrome antenna with spring. Order Motorola style mount separately. Learn More

LAIRD 450-470 MHz base loaded 5 dB 5/8 over 5/8 wave antenna. 200 watts. Order spring and/or mount separately. Learn More

LAIRD 470-490 MHz Unity gain 1/4 wave antenna in black. Brass button contact provides a superior match at feedpoint. Order mount seperately. Learn More

MAXRAD 40-47 MHz DC grounded base loaded quarterwave antenna. 500 watts. 4 MHz bandwidth. Requires less ground plane area than conventional antennas. Learn More

GAMBER JOHNSON angle bracket with built in standoff. Fixed 25 degree angle and 50 degree swivel. Learn More

The Larsen NMOKUD vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58/U dual shield cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

MAXRAD mirror mount kit. Includes 3/4 " black mirror bracket, 17" RG58A-U cable and solder UHF male connector. For use with elevated feed antennas. Learn More

GAMBER JOHNSON angular mounting bracket. Has a fixed 50 degree angle. Black. Learn More

The Larsen NMO150B base-loaded 5/8 wave antenna only (black) operates within the VHF frequency range, 144-174 MHz. This vehicle antenna delivers high performance, with a gain of 3 dB (with ground plane). Maximum power input is 200 watts. The 49 inch whip antenna is field-tunable. Order NMO mount for your Larsen VHF mobile antenna separately. Learn More

MAXRAD 806-960 MHz Low Profile Vertical 1 dB gain antenna. 2 1/2" high. Black over black base. Order Motorola style mount separately. Learn More

LAIRD 430-450 MHz Unity gain 1/4 wave black antenna. Brass button contact provides a superior match at feedpoint. Order mount seperately. Learn More

MAXRAD 27-31 MHz mobile, 200 watt base loaded, quarter wave antenna only. Order desired Motorola style mount separately. Unity gain. Learn More

The Laird MABTO vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-1000 MHz in thick surfaces. This brass permanent mount is for a 3/8 or 3/4 inch hole in mounting surfaces 3/16 to 1/4 an inch thick. The Laird Technologies mobile antenna mount requires cable and connector to be ordered separately. Thread size is 1 1/8 inch - 18. Learn More

LARSEN reinstallation kit for all KG series glass mounted antennas. Learn More

LAIRD 806-866 MHz Phantom 3 dB low visibility white antenna. Order Motorola style mount and cable separately. Learn More

GAMBER JOHNSON upper tube assembly. Inserts into a 7", 9" or 13" lower pole, or vehicle base with a welded pole. 8" height; allows 0.38"-5.76" adjustment. Learn More

The Laird GR8PI magnetic antenna mount is a Motorola-style mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18. A rubber boot is included to prevent damage to your vehicle. The chrome-plated NMO mount includes 12 feet of RG58A/U cable. A PL259 connector is installed.The Laird chrome vehicle magnet mount is designed for use with Motorola-style mobile antennas up to 1000 MHz. Learn More

The PCTEL Maxrad MTPM vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-1000 MHz in thick surfaces. This permanent mount is for a 5/8 inch hole in mounting surfaces. It can be used with thick mounting plates.The PCTEL mobile antenna mount has a UHF female direct termination but cable is not included. Thread size is 1 1/8 inch - 18. Learn More

LAIRD 450-470 Portable antenna. PVC coated flexible whip, 1/2 wave. 8.5" long. BNC connector. Learn More

LAIRD 806-866 MHz 3dB gain open coil antenna in black stainless steel radiator and triple plated chrome nut included. Order LAIRD mount seperately Learn More

The Larsen NMOKUDTNC vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58/U dual shield cable and TNC crimp connector. Thread size is 1 1/8 inch - 18. Learn More

The Larsen NMOB vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount requires cable and connector. Thread size is 1 1/8 inch - 18. Learn More

LARSEN 160-174 MHz glass mount antenna. 2.4 dB gain. 14' dual shield low loss cable with a UHF male connector. Learn More

LAIRD 3/4 hole 90 degree chrome mirror mount bracket. Order LAIRD 3/4" hole brass mount, cable and connector separately. Learn More

MAXRAD 118-940 MHz 1/4 wave antenna. 250 continuous watt heavy duty 5/16 thread stub contact assembly. Black chrome. Mates with TAD/TAE,NMO,KD series mount. Learn More

LAIRD 118-970 MHz Unity gain field tunable 1/4 wave antenna in black. Brass button contact design provides for a superior match. Order mount seperately. Learn More

Laird 150-160 MHz injection molded portable antenna. THe length of the antenna is 10.5". The antenna is compatable with the following Vertex radios: VX-10, VX-110, VX-130, VX-150, VX-160, VX-180, VX-350 Series, VX-410 Series, VX-420 Series, VX-600, VX-800 Series, VX-900 and VX-920-Series Learn More

MAXRAD 440-480 MHz wideband antenna. 150 watt, 4.5 dB gain with shock spring. Order Motorola style mount separately. Learn More

LARSEN spring to be used on all lowband, VHF, UHF, 800 MHz antennas. Black. Learn More

LAIRD 3/4" hole all brass mount, 25 pack. Antennas are shipped bulk in one box, without a poly-bag except for the O-rings & nuts. Connectors not included. Learn More

The Laird MB8L vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is an all brass permanent mount for a 3/4 inch hole. The Laird Technologies mobile antenna mount includes 17 feet of RG58A/U stranded cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

The Laird MB8PS vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is an all brass permanent mount for a 3/4 inch hole. The Laird Technologies mobile antenna mount includes 17 feet of RG58A/U cable and solder-on PL259 connector. Thread size is 1 1/8 inch - 18. Learn More

The PCTEL Maxrad RBGPLI magnetic mount is a Motorola-style mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18. This 3 inch scratch-less magnet mount has a rubber boot that prevents damage. The black NMO mount includes 12 feet of RG58/U cable. A mini UHF connector is installed.The PCTEL black magnet mount is designed for use with Motorola-style mobile antennas up to 1000 MHz. Learn More

The Laird B1443S base-loaded 5/8 wave antenna with spring operates within the frequency range, 144-174 MHz. This VHF mobile antenna delivers high performance, with a gain of 3 dB. Maximum power input is 200 watts. The 49 inch stainless steel whip antenna has a UV-treated radome to resist sun damage. The housing is constructed using an ABS material, injection-molded around a solid brass insert and complete with plated brass fittings. Order NMO mount for your Laird mobile load coil antenna separately. Learn More

LAIRD 806-866 MHz 5dB chrome no ground plane closed coil collinear antenna. Order Motorola style mount separately. Learn More

LAIRD 896-970 MHz 3dB gain open coil antenna with molded ABS A style mount base. Order Motorlola style mount separately Learn More

LAIRD 1575.42 MHz GPS 27dB 3-5V low profile black antenna. Order Motorola style mount separately. Learn More

GAMBER JOHNSON 1/2" blank/filler panel used to fill empty spaces in console boxes. Learn More

LAIRD 132-174 MHz base loaded 1/2 wave antenna. 2.5 dB gain. Complete with load coil and 55" chrome whip. Order spring and/or mount separately. Learn More

LAIRD 142-160 MHz Phantom unity gain low visibility white antenna. Field tunable. Order Motorola style mount and cable separately. Learn More

PCTEL 210-230 MHz MOSAIC 3dB gain antenna with spring. For use with existing Motorola mounts. Learn More

LARSEN 806-896 MHz 3dB on glass antenna. Enclosed coil whip. Black finish. Cable is hardwire to coupling box. includes 14' RG58/U cable. Order connector. separately. Learn More

MAXRAD 806-960 MHz Low Profile Vertical 1 dB gain antenna. 2 1/2" high. All black with 1-piece construction. Order Motorola style mount separately. Learn More

LARSEN 27-30 MHz NMO black loading coil only. Learn More

MAXRAD 806-960/ 1710-1990 MHz 2 dB gain Low Profile Verticle antenna. Black with black heavy duty base. Order Motorola style mount separately. Learn More

LAIRD 470-490 MHz Phantom Elite 3 dB-MEG low visibility black antenna. Order Motorola style mount and cable separately Learn More

The Larsen NMOMMRPL magnetic antenna mount is for use with Motorola-style, NMO mobile antennas. This Motorola-style magnet mount provides temporary, easily removable vehicle mounting for mobile antennas. This high frequency 0-3000 MHz NMO mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna mount is constructed from a zinc alloy body plated with copper and nickel that is black coated. The magnetic base has a protective coating that prevents damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style antennas includes 12 feet of RG58A/U cable. UHF male connector is installed. Learn More

MAXRAD black 3/4" hole stud mount GPS+ combination antenna. Includes 17' RG174 with SMA male connector (GPS) & RG58/U with o connector. Mobile antenna not included. Learn More

LARSEN 27-30 MHz 200 watt base loaded unity gain 1/4 wave chrome mobile antenna. Purchase Motorola style mount separately. Learn More

PCTEL 108-512 MHz unity gain Mosaic antenna. Order Motorola style mount separately. Learn More

The Larsen NMOKHFUDTHK vehicle roof mount antenna installation hardware kit is a special application NMO mount for high frequency Motorola-style mobile antennas 0-6000 MHz in thick surfaces. Center pin is removable to function as a standard or high frequency mount. This nickel, copper and zinc alloy permanent mount is for a 3/4 inch hole in mounting surfaces up to 1/2 an inch thick. The Larsen mobile antenna mount includes 17 feet of RG58/U dual shield cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

MAXRAD 430-480 MHz Low Profile Verticle unity gain antenna. Black over black base. Order Motorola style mount separately. Learn More

LARSEN 450-470 MHz collinear whip. For use with UHF coil. Learn More

MAXRAD shock spring for low band, high band/3dB and UHF 5dB antenna models. Not for use with MAX base antennas. Learn More

The PCTEL MHB5800 5/8 wave antenna operates within the VHF frequency range, 144-174 MHz. This VHF mobile antenna is field-tunable and features a 3 dB gain with or without a ground plane. Maximum power input is 200 watts. The 58 inch whip antenna utilizes a chrome coil design with the enhancements of a heavy-duty tapered rod for maximum durability in harsh environments. The two-way antenna is able to maintain desired resonant frequency through heavy shock vibrations. The PCTEL heavy-duty whip-style antenna is designed for mobile two-way communication within the 144-174 MHz VHF frequency band.Order Motorola style mount separately. Learn More

MAXRAD brass permanent body mount for a 3/4" hole. Includes 25' RG58/U and loose mini-UHF connector. Formerly Part NMO58U//PL. Learn More

The PCTEL Maxrad GMLFML195C magnetic mount is a Motorola-style, NMO mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18, and the magnetic base is 3 1/4 inches. The magnetic base has a rubber boot to prevent damage to your vehicle. This NMO mount includes 12 feet of Proflex Plus 195 low loss coax cable. A TNC male connector is installed.The PCTEL black vehicle magnet mount is designed for use with Motorola-style mobile antennas of a higher frequency (0 - 3000 MHz). Learn More

The Larsen NMOMMRDSSMA vehicle antenna magnetic mount is for use with Motorola-style, NMO mobile antennas. This Motorola-style magnet mount provides temporary, easily removable mounts for mobile antennas. This high frequency 0-3000 MHz NMO mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna mount is constructed from a zinc alloy body plated with copper and nickel. The magnetic base has a protective coating that prevents damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style mobile antennas includes 12 feet of RG58A/U dual shield cable. SMA male connector is installed. Learn More

MAXRAD 380-520MHz wideband 2dB with ground plane / unity gain without black antenna with stainless steel spring. 200 watts. Order Motorola style mount separately. Learn More

TERRAWAVE 2.4GHz 5dBi Rubber Duck Antenna with RPSMA plug Learn More

2.4-2.5/4.9-5.85 GHz 2 dBi Dual Band Rubber Duck Antenna With N Plug Learn More

LAIRD 3/8" hole stainless steel trunk groove bracket. Order LAIRD all brass 3/8" hole mount, cable and connector seperately. Learn More

LAIRD all brass 0-1000 MHz permanent body mount for a 3/4" hole. Includes 14' LMR 195 cable and crimp SMA plug installed. Learn More

MAXRAD magnet mount with 12' RG-58/U and attached FME female connector. Learn More

MAXRAD 144-174 MHz 3 dB coil. Learn More

PCTEL 3/8" or 3/4" diameter low profile thick roof mount for up to 1/2" deep. Accepts low profile and MOSAIC antennas. Has 30' RG58/U cable. NO connector Learn More

The Laird MB8UMI vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is an all brass permanent mount for a 3/4 inch hole. The Laird Technologies mobile antenna mount includes 17 feet of RG58/U solid center cable and installed mini UHF connector. Thread size is 1 1/8 inch - 18. Learn More

The Laird MABVT8U vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-1000 MHz in thick surfaces. This brass permanent mount is for a 3/4 inch hole in mounting surfaces up to 1/2 an inch thick. The Laird Technologies mobile antenna mount includes 17 feet of RG58U cable but connector needs to be ordered separately. Thread size is 1 1/8 inch - 18. Learn More

The PCTEL Maxrad NMO58UFFME vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U coax cable and an installed FME female connector. Thread size is 1 1/8 inch - 18. Learn More

The PCTEL Maxrad NMO34 vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount requires you to purchase cable and connectors separately. Thread size is 1 1/8 inch - 18. Learn More

The PCTEL Maxrad NMO58U-NC vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U cable. No connector is included. Thread size is 1 1/8 inch - 18. Learn More

LAIRD 4900-6000 MHz Phantom 3 dB-meg NMO mountable low visibility antenna. Order Motorola style mount and cable separately. Learn More

Havis offers the widest variety of accessories and options in the industry for your mobile office solution.The Havis Side Mount Arm Rest mounts over the enclosed console and is more durable than sewn pads. The design enhances officer comfort and efficiency. Learn More

MAXRAD brass permanent body mount for a 3/4" hole. Includes 25' RG58/U and installed mini-UHF connector. Learn More

LAIRD 3/8" hole all brass mount. Includes 17' RG58A/U cable and no connector. For use with antennas in the 27-1000 MHz range. Learn More

LARSEN trunk gutter mount L bracket for 3/4 hole. Metal finish . 2 1/8" by 2 1/8" footprint. Learn More

The Laird MB8X vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is an all brass permanent mount for a 3/4 inch hole. The Laird Technologies mobile antenna mount includes 17 feet of low loss RG8X cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

PCTEL MAXRAD 0-3 GHz 3/4" hole antenna mount. Includes 17' Pro-Flex Plus 195 low loss coaxial cable and SMA male connector (installed). Learn More

GAMBER JOHNSON Cigarette Lighter MCS adapter kit. Installs to the side of any MCS console box or Cigarette Knockout Filler Panel, Item No. 3130-0361 -70404. Learn More

LARSEN trunk gutter mount for use with NMO antennas. Stainless steel "L" bracket fastens with three screws. Includes 17'RG-58/U cable & connector. Learn More

MIMO Rubber Duck Antenna with RPSMA Plug Connector (F Center Pin) Learn More

The Havis Tilt Swivel Motion Device has a 1.82" overall height. The Motion device enables 180 degree horizontal rotation for laptops and docking stations and a 90 degree vertical tilt for a customized viewing angle. The easy-adjust and quick-release handle locks down the position of the notebook. Learn More

The Larsen NMO150BK base-loaded VHF mobile antenna operates within the frequency range, 144-174 MHz. This 51.5 inch whip antenna features a gain of 3 dBd. The vehicle antenna includes a 3/4 inch hole mount, 17 feet of RG58A/U cable and a loose UHF male connector for vehicle installation. Learn More

LAIRD 136-174/380-520/760-870 MHz Multi- band mobile antenna. Unity gain on VHF & 6 dBi gain on UHF/700/800. Order NMO style mount seperately. Includes spring. Learn More

6 pack LAIRD black quarterwave rain cap for NMO style. Learn More

The PCTEL Maxrad NMO58AUSP vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58A/U coax cable and an UHF male (PL259) connector. Thread size is 1 1/8 inch - 18. Learn More

GAI-TRONICS 12VDC power supply for desksets, adapters & inter-connects. Used with ITR200A, L3149B, IPE2500A, IPE2500A-MLS, PL1877A, ITA2000A, IDA1000A. Learn More

LAIRD 896-970 MHz, 5dB gain, NGP closed collinear coil antenna with shock spring. Order Motorola style mount separately. Learn More

The PCTEL Maxrad NMO58UPL vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U cable and a mini UHF connector. Thread size is 1 1/8 inch - 18. Learn More

MAXRAD weatherproof trunk/hood groove bracket mount. Cable exits at 45 degree angle. Includes 17' RG58/U cable with no connector. Learn More

LAIRD black mirror mount bracket with 3/4" mount. Includes 17' RG58U cable. Order connector separately. Learn More

2.4 GHz 2 Dbi Rubber Duck Antenna with RPTNC Plug Learn More

LAIRD 806-866 MHz Phantom 3 dB-MEG low visibility black antenna. Order Motorola style mount and cable separately. Ground plane required. Learn More

The PCTEL Maxrad BMA vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is a brass permanent mount for a 3/4 or 3/8 inch hole (from below). The PCTEL mobile antenna mount includes 17 feet of RG58/U cable and silver-plated UHF male solder connector. Thread size is 1 1/8 inch - 18. Learn More

LARSEN 800-866 MHz NMO collinear mobile antenna. 3.4dB gain, 200 watts. Order Motorola style mount separately. Black. Learn More

MAXRAD trunk gutter mount L bracket for 3/4" hole. Actual hole size 13/16". Black. Learn More

LARSEN 40-50 MHz NMO black loading coil only. Learn More

LAIRD 806-866 MHz Phantom Elite 3dB-MEG low visibility white antenna. Order Motorola style mount and cable separately. Learn More

LAIRD 2.4-2.5 GHz 4" portable molded antenna with right angle articulating SMA male connector. Learn More

LAIRD 142-160 MHz Phantom unity gain low visibility black antenna. Field tunable. Order Motorola style mount and cable separately. Learn More

The PCTEL Maxrad BMATM-NC vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-1000 MHz in thick surfaces. This brass permanent mount is for a 3/8 to 3/4 inch hole in mounting surfaces up to 3/16 of an inch thick.The PCTEL mobile antenna mount includes 17 feet of RG58/U coax cable. Connector is not included. Thread size is 1 1/8 inch - 18. Learn More

MAXRAD 760-870 MHz 3dB chrome antenna with spring. 150 watts. Order Motorola style mount separately. Learn More

LAIRD 118-512 MHz Unity gain field tunable black antenna with spring. Order Motorola style mount separately. Learn More

LAIRD 806-866 MHz Phantom Elite 3dB-MEG low visibility black antenna. Order Motorola style mount and cable separately. Learn More

LARSEN 450-470 MHz 200 watt 3 dB gain 5/8 wave base loaded mobile antenna with spring. Order Motorlola style mount separately. Learn More

MAXRAD 406-430 MHz 200 watt, 5dB gain collinear antenna only. Order Motorola style mount separately. Learn More

The PCTEL Maxrad BMATM//NC25 vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-1000 MHz in thick surfaces. This brass permanent mount is for a 3/8 to 3/4 inch hole in mounting surfaces up to 3/16 of an inch thick. The PCTEL mobile antenna mount includes 25 feet of RG58/U coax cable. Connector is not included. Thread size is 1 1/8 inch - 18. Learn More

LAIRD 155-160 MHz Phantom Elite 0 dB-MEG low visibility black antenna. Order Motorola style mount and cable separately. Learn More

The PCTEL Maxrad BMATM vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-1000 MHz in thick surfaces. This brass permanent mount is for a 3/8 to 3/4 inch hole in mounting surfaces up to 3/16 of an inch thick. The PCTEL mobile antenna mount includes 17 feet of RG58/U coax cable and PL259 solder connector. Thread size is 1 1/8 inch - 18. Learn More

GAMBER JOHNSON 1" blank/filler panel used to fill empty spaces in console box. Learn More

MAXRAD 450-470 MHz wideband no ground plane antenna. Unity gain, with spring. Order desired Motorola style mount separately.Can not be used with out spring. Learn More

LAIRD 150-155 MHz Phantom Elite 0 dB-MEG low visibility white antenna. Order Motorola style mount and cable separately. Learn More

LAIRD 3/4" brass hole mount for surfaces from .032" to .500" thick. Cable and connector are not included. Learn More

The Larsen NMOKHFCXTHK vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-1000 MHz in thick surfaces. This nickel, copper and zinc alloy permanent mount is for a 3/4 inch hole in mounting surfaces up to 1/2 an inch thick. The vehicle roof mount is also convertible to support high frequency applications 0-6000 MHz because of the removable center pin.The Larsen mobile antenna mount includes 17 feet of RG58A/U cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

The PCTEL ASP7455 Mosaic vibration-resistant collinear antenna with spring provides exceptional coverage in the VHF (138-174 MHz) frequency band. The vehicle antenna has a 3 dB gain performance. Maximum power input is 150 watts.The 49 inch whip antenna features a black UV stabilized base that will resist chalking and provide long lasting operation. The unique DURA-FLEX elastomer spring eliminates duplex system noise that is found with traditional metal coil springs. The PCTEL Mosaic collinear VHF mobile antenna will provide excellent coverage and performance for two-way communication. Order Motorola-style mount separately. Learn More

LAIRD 144-174 MHz 2.5 dB base loaded 1/2 wave no ground plane antenna. Order spring and/or mount separately. Learn More

LARSEN 0-3000 MHz NMO magnet mount. Includes 12' RG58A/U cable and installed BNC connector. Learn More

GAMBER JOHNSON 3" blank/filler panel used to fill empty spaces in console boxes. Learn More

LARSEN 144-160 MHz glass mount antenna 2.5dB gain, 1/2 wave. Includes 14' of RG58/U cable with UHF male connector. Learn More

MAXRAD 40-47 MHz, 200 watt, base loaded quarter wave antenna only. Order desired Motorola style mount separately. Unity gain. Learn More

GAI-TRONICS programming cable for ITR2000/2300, IPE2500, ITI6000, IRC3000, ITD2000A/3000A, PL1877A, amplified speakers. Learn More

LARSEN Low profile 26 dB 5V white GPS antenna. Requires ground plane. Order Motorola style mount separately. Learn More

LAIRD 150-155 MHz Phantom Elite 0 dB-MEG low visibility black antenna. Order Motorola style mount and cable separately. Learn More

The Larsen NMOKHFUD vehicle roof mount antenna installation hardware kit is a special application NMO mount for high frequency Motorola-style mobile antennas 0-6000 MHz. Center pin is removable to function as a standard or high frequency mount. This nickel, copper and zinc alloy permanent mount is for a 3/4 inch hole in mounting surfaces. The Larsen mobile antenna mount includes 17 feet of RG58/U dual shield cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

The Laird MABVT8 vehicle roof mount antenna installation hardware kit is a special application NMO mount for Motorola-style mobile antennas 0-1000 MHz in thick surfaces. This brass permanent mount is for a 3/4 inch hole in mounting surfaces up to 1/2 an inch thick. The Laird Technologies mobile antenna mount includes 17 feet of RG58A/U cable but connector needs to be ordered separately. Thread size is 1 1/8 inch - 18. Learn More

LAIRD 2400-2500 MHz Phantom Elite 3 dB-MEG low visibility black antenna. Order Motorola style mount and cable seperately. Learn More

MAXRAD 144-174 MHz, 26 MHz bandwidth no ground plane antenna. Order Motorola style mount separately. Learn More

MAXRAD trunk lid mount. Low silhouette trunk lid mount with 17 feet RG58 coax and UHF male connector. Allows no holes trunk lid installation. Learn More

The Laird GBR8PI magnetic antenna mount is a Motorola-style mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18 and the overall size is 3 1/8 inches. The black NMO mount includes 12 feet of RG58A/U cable. A PL259 connector is installed.The Laird black vehicle magnet mount is designed for use with Motorola-style mobile antennas up to 1000 MHz. Learn More

The Larsen NMOKHFCXMPL vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel, copper and zinc alloy permanent mount is for a 3/4 inch hole in mounting surfaces from 0.1 to 0.075 inches thick. The vehicle roof mount converts to high frequency applications (0-6000 MHz) by removing the center pin.The Larsen mobile antenna mount includes 17 feet of RG58A/U dual shield cable and a mini UHF connector. Thread size is 1 1/8 inch - 18. Learn More

LARSEN replacement whip for most VHF gain and low band 1/4 wave antennas. .125 x 49" tapered rod. Learn More

LARSEN Low profile 26 dB black 5V GPS antenna. Requires ground plane. Order Motorola style mount separately. Learn More

LARSEN 806-896 MHz flexible blade style antenna. 2.14dBi gain. 12' RG174 with Mini UHF connector installed. Black. Mounts via adhesive tape. Learn More

STI-CO 760-896 MHz unity gain concealed internal antenna. Includes 20' LMR195 cable and NO connector. Learn More

The PCTEL BMAX824/1850 molded base dual band mobile antenna provides superior omnidirectional coverage in the cellular (824 - 894 MHz) and PCS (1850 - 1990 MHz) bands. This vehicle NMO roof mount antenna is designed to minimize loss and maximize gain. You can expect a unity gain in the cellular band and a gain of 2 dB in the PCS band with this whip antenna.This dual band cellular antenna features a molded polymer base, spring loaded contact pin and a 0.062 stainless steel open coil whip. Order Motorola-style mount for the PCTEL roof mount antenna separately. Learn More

RITRON 110VAC to 13VDC 1 amp power supply for Outpost Callboxes RQX series wireless system. Learn More

MAXRAD 144-174 MHz, 26 MHz bandwidth no ground plane antenna with spring. Order Motorola style mount separately. Learn More

LAIRD 896-970 MHz Unity gain 1/4 wave antenna. Black. Order mount separately. Learn More

STI-CO 136-1000 MHz unity gain 3/4" hole roof mount antenna with 17' RG58/U cable. Order connector separately. Learn More

LARSEN 450-470 MHz On-Glass antenna. 2.4 dB gain, half-wave collinear. No ground plane required. Includes cable and PL-259 connector. Learn More

PCTEL 150-512 MHz unity gain Mosaic antenna with spring. Order Motorola style mount separately. Learn More

LAIRD 156-174 MHz Phantom unity gain low visibility black antenna. Field tunable. Order Motorola style mount and cable separately. Learn More

LAIRD 410-430 MHz Phantom 3 dB low visibility white antenna. Order Motorola style mount and cable separately. Learn More

MAXRAD 450-470 MHz 3/5dB gain no ground plane antenna. 200 watt. Suitable for fiberglass vehicles. With spring. Order cable and mount separately. Learn More

2.4/5 GHz 2/3 dBi Rubber Duck with RPTNC Plug Learn More

MAXRAD brass nut and "O" ring for 3/4" mount. Learn More

STI-CO 150-174 MHz bumper mount antenna. Fits most vehicles with non-metallic bumpers. Includes 2 antennas, mounting tape, cable. Order connectors separately. Learn More

MAXRAD 27-31 MHz coil. Learn More

GAMBER JOHNSON upper pole assembly. Height 10.22" but allows 0.38" - 5.76" adjustment above lip of Lower Tube. (10.22"H x 4.31"W x 3.0"D) Learn More

The Havis 3" Filler Plate. Learn More

The Havis 1-Piece Equipment mounting bracket has a 2.5" mounting space. It fits the Motorola XTL 2500, XTL5000-05, APX 7500, APX 6500. Learn More

GAMBER below the dash multiple mount system. Holds 2-3 mobile radio units. Matte black. Learn More

MAXRAD 3/4" hole mirror mount. Chrome. Learn More

LAIRD 430-450 MHz Unity gain 1/4 wave antenna. Brass button contact design provides a superior match at feedpoint. Order mount separately. Learn More

LAIRD 800-866 MHz 8" 1/2 wave portable antenna. Covered BNC connector. Learn More

MAXRAD 740-870 MHz Low Profile Vertical 2 dB gain antenna. 2.4" high. White over chrome. Order Motorola style mount separately. Learn More

MAXRAD 27-31 MHz D.C. grounded, base loaded antenna. 500 watt. 1 MHz band- width. Requires less gnd plane area than conventional antenna Fits Motorola mounts. Learn More

GAI-TRONICS 16 chan/freq tone remote adapter. Monitor, desk mic connection, courtesy tones, supervisor control, accy & scanning adapter kit. Learn More

LARSEN 890-960 portable "Spots" antenna. Articulating right angle. Full 1/2 wave dipole. Reverse polarity TNC. Learn More

LARSEN 136-512 MHz NMO quarter wave mobile antenna only. Order desired NMO 3/4" mount separately. Learn More

LARSEN 27-30 MHz 200 watt base loaded unity gain 1/4 wave black mobile antenna. Purchase Motorola style mount separately. Learn More

MAXRAD 144-174 MHz. 1/2 wave, no ground plane 2.4 dB antenna with spring. Order Motorola style mount separately. Learn More

MAXRAD 740-870 MHz Low Profile Vertical 2 dB gain black antenna. 2.4" high. Order Motorola style mount separately. Learn More

LAIRD 430-450 MHz Phantom Elite 3 dB-MEG low visibility black antenna. Order Motorola style mount and cable separately Learn More

The Laird MB820 vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The Laird Technologies mobile antenna mount includes 20 feet of RG58A/U cable but no connector. Thread size is 1 1/8 inch - 18. Learn More

LARSEN 740-866 MHz Shadow 0dB low profile black antenna. Order Motorola/NMO style mount separately. Learn More

The PCTEL Maxrad RGPL magnetic mount is a Motorola-style mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18. This magnet mount has a rubber boot that prevents damage. The chrome NMO mount includes 12 feet of RG58/U cable. A mini UHF male connector is included but not installed.The PCTEL chrome magnet mount is designed for use with Motorola-style mobile antennas up to 1000 MHz. Learn More

LARSEN 150/450/800 tri-band black unity gain antenna. Molded ABS base. Order Motorola style mounts separately. Learn More

LAIRD 155-160 MHz Phantom Elite 0 dB-MEG low visibility white antenna. Order Motorola style mount and cable separately. Learn More

MAXRAD 3/8" hole mounting for 1/32"-1/2" thick mounting surfaces. Includes 17' RG58/U cable and NO connector. Learn More

LAIRD heavy duty "Z" shaped antenna mount bracket with a 3/4" hole and self-tapping screws. Learn More

LAIRD 450-470 MHz base loaded 1/2 wave 2.4 dB, 200 watts, no ground plane, antenna. Order spring and/or mount separately. Learn More

The PCTEL MHB5800132S base-loaded 5/8 wave antenna with spring operates within the VHF frequency range, 132-174 MHz. This VHF mobile antenna delivers high performance, with a gain of 3 dB. Maximum power input is 200 watts. This 58 inch whip antenna utilizes a chrome coil design with the enhancements of a heavy-duty tapered rod for maximum durability in tough environments. Order NMO mount separately. Learn More

LARSEN UHF coil. Use with appropriate whip for desired frequency. Black finish to match Kulrod T(TM) whips. Learn More

MAXRAD waterproof mirror mounting kit. Chrome plated. Accepts antenna that fits Motorola style mounts. Includes 17' RG58/U & mini-UHF male connector. Learn More

The Laird G8UT magnetic antenna mount is a Motorola-style mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18. The chrome-plated NMO mount includes 12 feet of RG58U cable. A TNC connector is included.The Laird chrome vehicle magnet mount is designed for use with Motorola-style mobile antennas up to 1000 MHz. Learn More

LAIRD 450-470 MHz base loaded 1/2 wave 2.4 dB, 200 watts, no ground plane, chrome antenna with spring. Order mount separately. Learn More

The PCTEL MWV1322S wide-band, field-tunable, VHF mobile antenna with spring operates within the frequency range, 132-174 MHz. Addressing equipment interoperability changes, this vehicle antenna provides superior bandwidth coverage without sacrificing performance. This field-tunable antenna features a gain of 2.4 dB (with a ground plane) or unity gain without a ground plane. Maximum power input is 200 watts.The 48 inch whip antenna features a rugged compact design that is able to withstand high-vibration conditions and maintain desired resonant frequency. For two-way communication, this PCTEL wideband VHF mobile antenna provides 26 MHz bandwidth without compromising performance. Learn More

LARSEN 136-512 MHz quarter wave mobile antenna. Black. Order desired NMO 3/4" mount separately. Learn More

The PCTEL Maxrad RGPLI magnetic mount is a Motorola-style, NMO mobile antenna mount that offers removability. No drilling into your vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18. A rubber boot is attached to the magnetic mount. This PCTEL black magnet mount for mobile antennas operates within 0 - 1000 MHz and includes 12 feet of RG58/U cable. A mini UHF connector is installed. Learn More

The PCTEL Maxrad BG magnetic mount is a Motorola-style mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18. This black NMO mount includes 12 feet of RG58A/U cable. A UHF male connector is included but not installed.The PCTEL black vehicle magnet mount is designed for use with Motorola-style mobile antennas up to 512 MHz. Learn More

LARSEN 450-470 MHz Mirage low profile unity gain white antenna. 100 watts. Order Motorola/NMO style mount and cable separately. Learn More

LAIRD 450-470 MHz Phantom 3 dB low visibility white antenna. Order Motorola style mount and cable separately. Learn More

MOBILE MARK 3-5V GPS black surface mount antenna. 15' RG174 & installed SMA connector. Learn More

2.4-5.85 GHz 2/3 dBi Rubber Duck with RPTNC Plug Learn More

The PCTEL PCTWSLMR wide spectrum multiband antenna supports multiband radio technology to provide full interoperability among emergency management and response personnel, regardless of frequency band used. It provides outstanding coverage of VHF and UHF frequencies, including 700 MHz public safety, 800 MHz and 900 MHz frequencies in a ready-to-install, no tune design. Its multiband elements are housed in a rugged, impact-resistant housing for maximum durability and its base is designed to interface with standard NMO mobile mounts to facilitate existing installation upgrades on public safety vehicles. Learn More

The Laird TRA6927M3PBN-001 Phantom antenna operates simultaneously in the 698-960 MHz and 1710-2700 MHz bands, ideal for 4G/3G applications where no ground plane or metal surface is available. A mechanically robust design suitable for both indoor and outdoor applications with wide bandwidth and a low angle radiation pattern. The antenna features a threaded permanent stud mount. Learn More

The TerraWave M3045020M13115618 3G/4G/Wi-Fi/GPS Omnidirectional Antenna is designed for GPS/LTE/Cellular/PCS/2.4GHz applications. Includes three 13' pigtails - one pigtail dedicated to GPS, one pigtail dedicated to the LTE/Cellular/PCS frequency bands, and one pigtail dedicated to the 2.4 GHz frequency band. This antenna is an ideal solution for multiple frequency systems and includes a mounting gasket. Learn More

The TerraWave M3010020O1D0018 LTE/Cellular Terminal Antenna (Black) is ideal for cellular applications. The frequency range is 698-960/1710-2170/2500-2700 MHz and includes a SMA Male connector. Learn More

The Larsen NMOKMPL vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58/U cable and no connector. Thread size is 1 1/8 inch - 18. Learn More

Chevrolet Silverado 1500, GMC Sierra 1500 (2014-2015) / 2500/3500/HD (2015) / Tahoe/Suburban/Yukon/Yukon XL (2015) Learn More

Motorola-style magnet bases provide temporary, easily removable mounts for antennas. Thread size 1-1/8"-18. Learn More

The Havis C-EB25-XPR-1P 1-Piece Equipment mounting bracket has a 2.5" mounting space. It fits the Motorola XPR4550, XPR4380, XPR4580 and XPR4350 remote radios. Learn More

1-Piece Equipment mounting bracket with 2.5" Mounting Space. Fits Motorola PM 400. Learn More

The Laird GR8UM 3/4" Magnetic antenna mount is a NMO mount. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust. A rubber boot is included to prevent damage to your vehicle. The chrome-plated NMO mount includes 12 feet of RG58A/U cable. An loose Mini UHF Male crimp connector is included. Learn More

SPECO 6-1/2 x 11" PA trumpet horn. 200- 15000 Hz, 40W maximum. 8 ohm. White with universal mounting bracket, stainless steel hardware. Learn More

SPECO amplified 6" PA horn, 500-5000 Hz. 20 watt max. power. Weatherproof plastic construction. Minimum input 1/8 W. Requires 10-16 VDC @ 2 Amps. Learn More

SPECO 8" PA horn. 200-15000 Hz, 25 watt max. power. Aluminum construction, weatherproof. Learn More

SPECO 6" PA horn. 250-15000 Hz, 15 watt maximum power. Aluminum construction, weatherproof. Learn More

LAIRD 800-866 MHz 4" portable antenna. Injection molded. SMA female connector. Learn More

LAIRD 902-960 MHz 4" portable antenna. Injection molded. SMA male connector. Learn More

SPECO 4" deluxe communications speaker. 700-2000 Hz. 10 watt speaker. 8 ohm. Includes swivel bracket. ABS plastic. Includes 10' cord with 3.5mm mini plug. Learn More

SPECO 8" weatherproof PA horn with 70V line transformer. 200-15000 Hz. 30 W maximum. Aluminum construction. Learn More

SPECO 5 x 8" PA trumpet horn. 200-15000 Hz, 15 watt continuous with 25 watt max. power. 8 ohm. Aluminum construction, weatherproof. Learn More

SPECO 5W 8" dual cone ceiling speaker with white 12" grill and 70/25V transformer. Learn More

LAIRD 450-470 MHz 6" portable antenna. For Motorola MX, HT50, HT600, MT1000, Expo, MH200, Radius, Saber. 1/4-32 x 7/32 thread connector. Learn More

SPECO 5" PA trumpet speaker. 300-15000 Hz, 15 watt max. power. Does not include cord. Aluminum construction, weather- proof. Learn More

LAIRD 450-470 MHz 3.3" injection molded portable antenna with Vertex SMA connector. Learn More

CSI/ Speco 30 watt RMS public address sound amplifier with with bass/treble controls. ACC AC outlet, auto mute function, 70/25V, 4/8/16ohm outputs. Learn More

SPECO TECHNOLOGIES 60W RMS public address amplifier with mixer. Learn More

The TerraWave Dual Band Micro Omni Antenna is optimized for small form factor/aesthetic and mobile Wi-Fi applications. This aesthetically-pleasing antenna includes four dual-band Wi-Fi pigtails and RPTNC connectors. The antenna is an ideal partner for four connector dual-band Wi-Fi Access Points where low profile and/or aesthetics is a major deployment consideration. This multi-use antenna can also be used in vehicles for communications, location tracking, and fleet management. Learn More

2.4/5 GHz 2/3 Dbi Duck Learn More

LAIRD 450-470 MHz 6" portable antenna. Injection molded. For GE, MPD & TPX. M7 X 1.0 connector. Learn More

LAIRD 806-896 MHz 3.5dB black antenna with closed coil collinear stainless steel whip. Order Motorola style mount separately. Learn More

LAIRD 164-174 Injection molded antenna. 6" in length. BNC male termination. Learn More

LAIRD 406-430 MHz Unity gain 1/4 wave antenna in black. Brass button contact provides a superior match at feedpoint. Order mount seperately. Learn More

The PCTEL Maxrad SMC vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is a stainless steel permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U cable and a loose TNC connector. Thread size is 1 1/8 inch - 18. Learn More

LAIRD 806-866 MHz, 5dB gain, loaded low profile, closed coil antenna. Order Motorola style 800 MHz mount separately. Learn More

LAIRD 150-162 MHz 6" portable antenna. Injection molded with 5/16-32 x 1/2 connector for Motorola HT200, MT500 and Uniden APH, APL, APU. Learn More

LAIRD 144-174 MHz 3dB load coil only. Learn More

LAIRD 806-896 MHz unity gain 1/4 wave antenna. Chrome. Order Motorola style mount separately. Learn More

LAIRD 821-896 MHz Phantom 3 dB gain white permanent mount screwbase antenna. Base secures with locknut. N female termination. 150 watts. Learn More

Learn More

MAXRAD black 3/4" hole stud mount GPS+ combination antenna. Includes 17' RG174 with SMA male connector (GPS) & RG58/U with TNC connector. Mobile antenna not included. Learn More

Learn More

LAIRD 165-175 MHz 10.5" injection molded portable antenna with 5/16"-32 x 3/8" thread KR connector. Learn More

LAIRD 450-470 injection molded antenna with TNC male connector. 6" long. Fits Icom and Standard radios or any other antenna using a TNC. Learn More

Speaker ceiling support for G86TG and G86TCG speakers. T-Bar bridge for ceiling support of 8" speakers with grilles, top hats. Steel construction. Learn More

Tripp Lite's 6-ft. High Speed HDMI (High-Definition Multimedia Interface) Black Cable allows interconnection between digital display devices, such as DTV's (Digital Television), Plasma displays, LCD TV's and projectors, to Digital source devices, such as Digital Set-Top boxes, Blu-Ray players and AV receivers. Supports iPad2 Video Mirroring when used with Apple Digital AV Adapter. HDMI assures that the best audio/video signal is always sent from the source (HDTV signal, Blu-Ray Player) to the display (Projection Television, LCD, Plasma, etc.). It does this by allowing uncompressed video and multi-channel audio data to be input to the display device through one single cable. An HDMI connection allows input at high rates of speed, up to 10.2 Gbps. Learn More

Laird Technologies Mobile Coil Antenna with Elastomer Spring provides increased flexibility, better shape retention and eliminates electronic and road noise when compared with stainless steel springs. New mobile coil antennas can be ordered with the elastomer spring or the new spring can be ordered separately and interchanged with Laird Technologies stainless steel spring on any field-deployed antenna. Learn More

The PCTEL Maxrad MVP vehicle roof mount antenna installation hardware kit is a special application NMO mount for high frequency Motorola-style mobile antennas 0-2400 MHz. This brass permanent mount is for a 5/8 inch hole in mounting surface. This thick plate mount can be used in surfaces up to 1/2 inch thick. Specially designed internal set screw locks on mount, make this roof mount vandal proof. The PCTEL mobile antenna mount requires cable and connector. Thread size is 1 1/8 inch - 18. Learn More

The Havis C-EB25-KNG-1P 1-Piece Equipment mounting bracket has a 2.5" mounting space. It fits the Kenwood NX-5700, NX-5800, or NX-5900 self contained or remote radios. Learn More

The Havis C-MD-112 11" Slide Out Locking Swing Arm with Motion Adapter. Slide out extends up to 3.75" with smooth gliding action to lengthen arm from 11.25" up to 15". 360 degrees of smooth rotation for ideal computing device viewing angles from both the driver and front passenger seats.Material: rugged heavy gauge black powder coated steel and machined 6061 aircraft aluminum for strength, durability, and rust prevention. Mounting pattern: 4 hole @ 2.125" square (1/4" mounting hardware provided) Learn More

MAXRAD 144-174 MHz 1/2 wave, no ground plane antenna. 200 watts. 2.4dB gain. Order Motorola style mount separately. Learn More

LAIRD Black chrome plated magnetic mt with 12 feet RG58A/U cable, no connector and black rubber boot to protect car surfaces. Learn More

MAXRAD 806-960 MHz/ 1710-1990 MHz dual band 2 dB gain Low Profile Verticle antenna. Black with black base. Order Motorola style mount separately. Learn More

MAXRAD waterproof mirror mounting kit. Chrome plated. Accepts antenna that fits Motorola style mounts. Includes 17' RG58/U cable & NO CONNECTOR. Learn More

LAIRD 144-152 MHz Unity gain 1/4 wave antenna. Brass button contact design provides a superior match at feedpoint. Order mount seperately. Learn More

LARSEN 450-470 MHz Shadow 0dB low profile antenna. Order Motorola/NMO style mount separately. Learn More

GAMBER JOHNSON equipment mounting full faceplate for Motorola XTL2500/5000 Control Head Radio. 1.51"H x 8.62"W x3"D Learn More

GAMBER JOHNSON support brace with pole- clamp attaches to the Lower Tube, other end secures to floor, console, or dash. Adjustable 10.3-16.3" Learn More

MAXRAD 740-870 MHz quarter wave unity gain titanium gray antenna. 150 watt. Order desired Motorola mount separately. Learn More