Tools

K-D 5-in-one tool, crimper, wire cutter, stripper, plier & 6 range bolt cutter strips. 22-10 AWG wire. 8" OAL Learn More

LMR-195 and LMR-200 Cable Prep Tool Learn More

LAIRD 3/4" hole saw replacement blades for HS34 (SKU 46012). 2pack. Learn More

WELLER 1/16" screwdriver replacement tip For WTCPS soldering station. 700 degrees F. Learn More

WIHA 1/4" hex bit handle driver. Holds standard 1/4" hex bits. featuers nonslip handle with chrome vanadium steel blade. Magnetic tip. Learn More

The Andrew 224363 cable flare tool is designed for use on LDF4 cables. This cable flare tool is designed to separate foam from the outer conductor of 1/2" coaxial cable. Learn More

RF Industries 3-cavity die set is for universal cable crimp tool frames only. This 3-cavity die set crimps to 0.068, 0.130, and 0.178 inches. The interchangeable die set for the RFA-4005 crimping tool is for coax cable types RG174/U, RG188/U, RG316/U, Mini59/U and LMR100. Hex dies are precision die cast to provide long service use and are easily changeable. Learn More

KLEIN Electricians' scissors with strip notches and serrated lower blade. Rounded points. 5" long Learn More

Andrew Solutions EZfit automated coax cable coring and stripping preparation tool is made for use with AVA5 HELIAX 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently. This drill-driven coring tool also includes a T-handle for manual hand operation.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. For fast, clean, and consistent cable preparations go with Andrew Solutions EZfit drill-driven automated cable preparation tools. Learn More

RF Industries coax cable crimp tool kit allows you to terminate most coaxial and datacom connectors for RG58, RG59, Proflex, RG8, and RG214 among other cables. The crimp tool kit includes a cable crimper along with two die sets. Die set one crimps to the following sizes: square 0.052 inch and hex 0.068, 0.100, 0.213, and 0.255 inches. Die set two crimps to the following sizes: hex 0.100, 0.128, and 0.429 inches. The ergonomically-designed cable crimping tool will last over 50,000 crimp cycles. A handy chart inside the lid indicates which interchangeable die is correct for the particular cable you are working with. Dies are precision die cast to provide long field service use and are easily changed. Learn More

WIRELESS SOLUTIONS Waxed Polyester Twine 195 Yd Spools: Denier (1000), twist prep ''S'' (7-9) and cable ''Z'' (3.1-4) Learn More

ANDREW 13/16" torque wrench for Type-N Coupling Nut for Andrew Cable.Audible click when the proper torque has been reached. 20 Inch Pounds,Tolerance -5/+0 Learn More

ANDREW 1-1/4" torque wrench for 7-16 DIN coupling nut. Designed w/ a mechanism to audibly notify the installer that proper torque has been reached. Learn More

RF Industries cable stripper easily cuts jacket, braid and dielectric in one step. This strip tool quickly prepares LMR 400 type cables. The coax three-level stripper preps a wide variety of popular cables including LMR 400, RG 214, RG 8, RG 213, Belden 9913, and Cushcraft 93605. RF Industries coax stripper is designed to prevent over-penetration and cable distortion. Strip lengths are manufactured to industry standards. Learn More

KLEIN Standard Diagonal-Cutting Pliers Semi-Flush Cutting. Trims plastic or printed circuit boards. Spring-loaded OAL 6-1/8", plastic dipped red handles. Learn More

The Andrew CT-7812 combination tool aids in field installation of connectors on 1/2 and 7/8 inch coax cables. The Andrew combination tool / combination wrench features open wrench ends, chamfer tool, file, inner conductor gauge, and jacket cut-off gauge.Works with Heliax 2.0 and Positive Stop connectors. Learn More

H.K. PORTER heavy duty long-handled 30" general purpose cutters. Steel handles, lock plate, and screw adjustment. Learn More

RF Industries cable crimp tool kit allows you to terminate most coaxial and datacom connectors for RG58, RG59, Proflex, RG8, and RG214 among other cables. The crimp tool kit includes two cable crimper along with two die set. Die set one crimps to the following sizes: square 0.052 inch and hex 0.068, 0.100, 0.213, and 0.255 inches. Die set two crimps to the following sizes: hex 0.100, 0.128, and 0.429 inches. The ergonomically-designed crimping tool will last over 50,000 crimp cycles. A handy chart inside the lid indicates which interchangeable die is correct for the particular cable youre working with. Dies are precision die cast to provide long field service use and are easily changed. Learn More

KLEIN JOURNEYMAN High-Leverage Cable Cutter. Cuts up to 4/0 Alum, 2/0 Soft Cu and 100-pair 24-AWG comm. cable. Red/Black handles. Made in the USA Learn More

ANDREW CPT-BK12U Blade kit Learn More

MASTER LOCK Resettable Combination Padlock, Four digits, 2 inch wide body, stainless steel; set own combination to any of 10,000 combos. 2-1/4" Shackle Learn More

TIMES MICROWAVE All-In-One Combination Prep Tool for prep of LMR240 cables for crimp or clamp connectors. Learn More

WELLER 1/16" screwdriver replacement tip for the EC3001 and EC4001 soldering station. Learn More

7-16 DIN Coupling Nut 1-1/4" Torque Wrench, Blue Handle Learn More

Andrew Solutions EASIAX manual cable preparation tool is made for use with 1/2 inch HELIAX coaxial cable, including: LDF4-50, HL4RP-50 and RXL4 series inch foam dielectric cables. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More

WERNER 4' Step Ladder. 300' lb capacity, extra heavy duty. Bright Orange. ANSI type 1A Fiberglass Learn More

TerraWave coaxial cable ratcheting crimp tool is designed for use on TWS 195, 200, and 240 style cables along with RG58, RG59 and RG62 cable styles. This crimping tool frame is made from high carbon tool steel construction. The yellow handle feature an ergonomic molded finger and palm grip for easy use. Learn More

Andrew Solutions replacement blade kit is made for use with: CPT-L4ARC1, CPT-L45ARC, CPT-E2L2N, and CPT-E2L2DIN automated cable prep tools. Each blade kit contains four blades. The blade life lasts up to 150 cable preparations.Be prepared. Damaged or dull blades cause inconsistent cuts and can slow, or even stop, an installation. A cable preparation tool performs best with a sharp blade. Andrew Solutions replacement blade kit ensures consistent, clean, and quick cable preparation. Learn More

The HT-312B is a time saving tool that quickly and accurately cuts and trims the coaxial jacket, shield and inner insulation in one easy step. Just lock the tool over the coax, spin clockwise 4 or 5 times and pull off the unwanted portion. Compartment holds hex key to align sensitive socket and adjust blade cut for optimum results. Learn More

ANDREW SnapStak Hanger Tool for installation and removal of SnapStak snap-in hangers. Learn More

WELLER 1/16" screwdriver replacement tip For WES51 soldering stations Learn More

K-D telescoping magnetic pick up tool extends from 7" to 25-9/16" and picks-up ferrous metal tools or parts to 1-1/2" pounds. Includes pocket clip. Learn More

TerraWave 3 blade strip tool is designed to prep a wide range of popular coaxial cables including TWS-400, RG8, RG11, RG213 and LMR 400. The TerraWave two-level cable stripper is specifically designed to prevent over-penetration of the cutting blades and avoid cable distortion. The strip lengths are manufactured to industry standards. Learn More

WIHA TORX(r) T-6 Power Drive Bit with Tapered Shank 2"OAL Learn More

Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More

WIHA Security Insert Bit Set. 39 pieces including TORX(r), Tri-wing, Torq-set, Spanner, Tamper Resistant Hex, Slotted, Phililps, Pozidriv & Square bits Learn More

WIRELESS SOLUTIONS 33pc Precision Screwdriver Set:(4)PH 000-1;(7)Slotted 1-4;(9)TStar T4-T20;(8)Hex0.7-4; (2)Pozi#0&1;(2) Sockets M5,M6; M4 Shaft Learn More

COMMSCOPE Replacement Blade Kit for 470164 (MCPT-1412) and 411530 (MCPT-3812) cutting tools. Learn More

H.K. PORTER compact Shear Cut Cable Cutter for Soft Cable. High leverage, cuts 4/0 and 2/0 soft copper cable. Not for steel or ACSR. Non-insulated. Learn More

LUFKIN 1"x 25' Locking Power Tape Non-slip co-molded rubber grip & durable ABS case; Non-slip rubber blade lock. Powerful dual magnet; HI-VIZ ORANGE Learn More

TerraWave economical racheting crimp tool is for TWS195 style cables along with RG58, RG59, RG62, and RG6 cable styles. This cable crimper tool supports crimp sizes 0.255" (6.48 mm), 0.213" (5.41 mm), 0.98" (2.49 mm), 0.68" (1.73 mm) and 0.321" (8.15 mm). This crimping tool does not crimp center pin.The cable crimping tool features green ergonomic molded finger and palm grip for easy use. Learn More

Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with FSJ4-50B HELIAX 1/2 inch version-two connectors. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More

RF Industries master engineer and technician cable crimp kit includes two crimp handles and 22 interchangeable die sets all in a convenient foam-lined plastic case. This crimping tool kit allows you to crimp coaxial cable from RG174/U to LMR400, insulated and non-insulated terminals and lugs, along with a wide range of modular plugs. The cable crimper frames included in the crimp kit are ratcheting crimpers. Learn More

PPC compression tools replacement blade pack includes 4 replacement blades for LDF4-50A cable. This replacement blade pack is important to maintaining your PPC compression tool. Learn More

Andrew Solutions EASIAX manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including: AVA5, LDF5, and VXL5. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More

Andrew EASIAX manual cable preparation tool is made for use with 3/8 inch and 1/2 inch superflex HELIAX coaxial cables, including: FSJ2, FSJ4, ETS2, RXL2 and RXL4. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew EASIAX cable preparation tools. Learn More

TerraWave non-ratcheting cable crimp tool is designed for use on TWS600 coaxial cables. This crimping tool frame is made from high carbon tool steel construction. Crimping size is 0.600 (15.50 mm) hex inch. The handle feature an ergonomic molded finger and palm grip for easy use. Learn More

The Times Microwave TK-400EZ 4-piece coax cable preparation tool kit includes the necessary tools for installing crimp connectors on LMR400 cables. This cable preparation tool kit contains the appropriate cable cutter, strip tool, crimp tool with die, and tool bag. Learn More

KLEIN Replacement Utility Knife Blades - Reversible. 2-7/16" x .025" ; 5/Pk Learn More

GREENLEE, 6 piece drill and tap combination bits. Drills and taps all in one operation. For up to 10 gauge metal. Taps 6-32 to 1/4-20. Learn More

WELLER Sponge, standard size for all Weller soldering and desoldering tool stands Learn More

XCELITE precision TORX(r) driver set. Includes screwdrivers in T5, T6, and tamper proof sizes T7, T8, T10, T15 in storage case Learn More

KLEIN regular non-ratcheting term. crimper. Designed for 10 to 22 AWG wire range. Wire cutter in nose. Use with both insulated and non-insulated termina Learn More

Times Microwave ratcheting crimper for LMR300 and LMR400 cables with corresponding crimp-style connectors has a fixed die set. The die set has 2-cavities, crimping to 0.324 and 0.429 inch hex. This cable crimper is rated at 50,000 cycles.Yellow handles make this cable crimping tool easy to locate. Learn More

Times Microwave crimper for LMR100, LMR195, LMR200, and LMR240 cables has a fixed die set. The die set has 3-cavities, crimping to 0.128, 0.213, and 0.255 inch hex. This cable crimper attaches corresponding LMR crimp-style connectors to LMR coaxial cables. Yellow handles make this cable crimping tool easy to locate. Learn More

JMA Wireless SP-12PL, 1/2" Prep Tool for Annular Plenum Cable. Learn More

Red Single Blade Cable Cutter Learn More

Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with LDF4-50A HELIAX 1/2 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More

"MASTER LOCK Resettable Combination Padlock, Four digits, 2 inch wide body,Black powder coated, set your own combination to any of 10,000 combos. 5/16" Shackle" Learn More

WELLER 1/16" narrow replacement tip for WTCPS soldering station. 800 deg F. Learn More

LISLE Hooked circuit tester hooded probe protects you fingers, and automatically centers wire. "Handy Hooker" Learn More

GREENLEE Heavy duty hacksaw with adjustable blade tension up to 30,000 psi. Blade is bi-metal with 12"/24 TPI. Extra blade stored in tubular frame. Learn More

MASTER LOCK Resettable Combination Padlock, Four digits, 1-1/16" boron- carbide shackle and brass body for showroom displays. No tool needed to set combination. Learn More

KLEIN all-in-one tool will cut, strip, and crimp paired-conductor cables. Crimp 4,6, and 8 pos for RJ22, RJ11/RJ12and RJ 45. Ratchet for full compression. Learn More

MASTER LOCK Resettable Combination Padlock, Four digits, 1-1/16" stainless shackle. No tool needed to set combination. Learn More

WELLER LTF 047" x.026" Single Flat Tip, for WSP80 Learn More

COMMSCOPE Torque Wrench for coupling torque of 4.3-10 connectors. 22 mm opening. Learn More

KLEIN Multipurpose wire stripper, cutter crimper strips solid and stranded wire 10 to 18 AWG. Spring loaded insulated blue handles. 7-1/8" OAL. Features a strong gripping serrated nose for easy bending, shaping, and pulling of wires. Learn More

KLEIN 5" Flush Cutter Low profile Diagonal cutter. Shears wire up to 14 AWG with flush-cut action. RED Handles (NON-ESD) Learn More

Times Microwave deburring tool DBT-U is ideal for all Times Microwave cable. The coaxial cable installation tool will deburr the center conductors on LMR195 through LMR600 coax cables making attachment of EZ style connectors a snap. This coax cleaning tool deburrs center conductors from 0.2 to 0.4 inches. The large blue screwdriver type handle provides leverage while rotating for easy use. Learn More

PPC Click-style Torque wrench for Andrew 7/8 Mini DIN Coupling Nut, pre-set to 8ft lb. OAL is 11-1/4" Blue handle. Learn More

Times Microwave combination manual cable preparation tool is made for use with 3/8 inch LMR-400 coaxial cable using crimp and clamp-style connectors. This cable hand prep tool joins a cable stripper tool and a cable trimming tool into one easy-to-use devicePrepare LMR-400 coax cable in two simple steps. First, insert the cable into side one, twist, cut, and expose the center conductor. Second, flip the tool around and insert the cable into side two. Twist and turn to expose the coax braid. This cable preparation tool has a built-in deburr tool and works with nearly all LMR-400 connectors. Learn More

TerraWave economical non-ratcheting crimp tool is for TWS400 style cables along with RG59, RG6, RG11, RG58, and RG8 cable styles. This cable crimper tool supports crimp sizes 0.406" (10.3 mm), 0.359" (9.12 mm) and 0.100" (2.54 mm). Learn More

ARROW T-25 staples. 3/8" leg. Fit wires up to 1/4" diameter. Learn More

MASTER LOCK Set your Own combination Padlock, Four digits, 2 inch wide body, solid brass; set your own combination to any of 10,000 combos. 2-1/4" Shackle Learn More

TIMES MICROWAVE LMR Cable Preparation Tool Blades for CST series prep tools. Learn More

ANDREW Aluminum Grounding Kit Preparation Tool for 7/8" corrugated cable SG series grounding kits Learn More

RF Industries cable crimp tool kit includes die set with 0.100, 0.128, and 0.429 inch cavities. This crimping tool with die sets will crimp RG8, Belden 9913, Ultraflex and Andrew braided coaxial cables. The cable crimper kit is compatible with connector type N 50 Ohm. Dies are composed of a fine blanked, high carbon tool steel. The cable crimping tool frame features an ergonomic molded finger and palm grip for easy use. Learn More

GREENLEE Utility knife with 3-position retractable blade features blade storage in a pop-up holder.Front-loading design for quick blade changes. Incl. 3 blades. Learn More

GREENLEE Cable cutter has a maximum capacity of 2/0 on copper cable and frequent use capacity of 1 AWG on copper 2/0 on aluminum, 100 pair on comm.cable. Learn More

PPC- Up to 1" Tubing Cutter, Plastic Learn More

LARSEN 3/4" spanner wrench for PO and NMOK mounts. Learn More

KLEIN Multipurpose wire stripper, cutter crimper strips stranded wire 16 to 26 AWG. Spring loaded Red handles. 6" OAL Learn More

RF Industries universal cable crimp tool frame is compatible with RFA4005 and RFA4006 dies. This replacement crimp handle is ergonomically designed. The universal die frames are easily changed using either a Phillips or Standard screwdriver. Learn More

KLEIN Cable splicer kit. Contains cable splicer knife, electrician scissors, and a slotted leather holder for belts up to 2" wide Learn More

Sargent cable crimper has a 3-cavity die for BNC and TNC connectors. This crimping tool works with RG58 and RG59 style cables along with RG55, RG62, RG140, RG141, RG142, RG201, RG223, RG303, and RG8279 style cables. The ratcheting crimper with high carbon tool steel die will crimp center pin to a 0.042 inch square, and ferrule to 0.068, 0.213, and 0.255 inch hex. Yellow handles feature an ergonomic molded finger and palm grip for easy use. Learn More

The Andrew 224368 cable flare tool is designed for use on LDF5 cables. This cable flare tool is designed to separate foam from the outer conductor of 7/8 inch coaxial cable. Learn More

SARGENT full cycle insulated terminal crimp tool. Three cavity, 2 jaw crimp Cavitites: 16-22 AWG (red), 14-16 AWG (blue) 10-12 AWG (yellow) Learn More

RF Industries coaxial cable stripper has an adjustable blade for larger coax and telephone cables. This zinc diecast strip tool is designed to prep a variety of coaxial cables including RG 8, RG 11, RG 213, RG 214/U, 9913, and 9914. RF Industries coax stripper prevents cable distortion. Learn More

XCELITE Precision screwdriver set. Includes individual screwdrivers in slotted: 1.5x60mm, 2.0x60mm, 2.5x60mm, 3.0x60mm. Phillips: #00, #0. ESD Safe Learn More

PPC Torque Wrench for N style 1/2" PPC compression connectors. 3/4" opening and 14 in/lbs of torque Learn More

RFS Special trimming tool makes the OMNI FIT Premium D01 connector attachment easier. No further tools are required to prepare the cable for the connector attachment. This is due to the unique design of the trimming tool, which combines all necessary functions in one compact tool. It can be used for CELLFLEX SCF12-50 foam dielectric cables. Learn More

DEWALT 17 pc Split point set Includes 1/16 to 1/4" Learn More

TRIPP LITE 8 outlet power strip. 24" metal housing. 15 A circuit breaker. On/off switch. 15' cord. Learn More

ANDREW 1/2" Aluminum Ground Kit Strip Tool for LDF4-50 foam cable. Manually operated for SG Series. Learn More

RF INDUSTRIES crimping tool kit. Includecrimp handle & 10 sets of dies. Phillip screwdriver is all you need to change dies. Crimps hex .042 to .429" Learn More

COMMSCOPE EASIAX Plus Automated Cable Preparation Tool for 1/2" coaxial cable. Learn More

PPC cable wire stripper and cable preparation tool is for LDF4-50A cables. This compression tool cuts the outer and inner conductor to the necessary length. The head of this stripping tool includes trim mark for correct cable cut-off and preparation, making strips more accurate. This cable preparation tool features navy vinyl cushion grip handles for easy use. Learn More

KESTER "44" Rosin core solder. .062 diameter 60% tin, 40% lead alloy. Packaged on 16 oz. (1 lb.) spool. Learn More

Andrew Solutions EASIAX manual cable preparation tool is made for use with 1/4 inch and 1/2 inch Superflex HELIAX coaxial cables, including FSJ1-50A and FSJ4-50B. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More

This special trimming tool improves the cable preparation prior to connector attachment. No further tools are required to prepare the cable for the connector attachment. This is due to the unique design of the trimming tool, which combines all necessary functions in one tool. It can be used for all CELLFLEX LCF12-50 foam dielectric cables in combination with the OMNI FIT Premium connector family D01, OMNI FIT Standard family B32 and RAPID FIT families 060/062 + 070/072. The Universal Trimming Tools Series offers the additional advantage to be convertible to different connector families and cable sizes (1/4", 3/8", 1/2" and 7/8") only by changing the insert. Learn More

Andrew Solutions EZfit CPTV2 series manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including AVA5 and FXL-780. Andrew cable hand prep tools prepare cable quickly and consistently.This cable stripper tool removes the cable jacketing and cores the cable foam. Plus, this cable cutting tool also flares the sheath for fast and clean connector attachment. This cable preparation tool includes one tool bit for AVA5 coaxial cable and one tool bit for FXL-780 coaxial cable. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EZfit Heliax 2.0 series manual cable preparation tools. Learn More

RFS TRIM-LCF12-D01-A is a Special trimming tool makes the OMNI FIT Premium D01 connector attachment easier. No further tools are required to prepare the cable for the connector attachment. This is due to the unique designof the trimming tool, which combines all necessary functions in one compact tool. It can be used for CELLFLEX LCF12-50 foam dielectric cables. Learn More