FREE ECONOMY SHIPPING*

* Purchases $300 or More Excl. apply

Save Big RF Equipment Marketplace

RF & Telecom Gear direct

from leading National Distributors


CommScope is at the forefront of shaping infrastructure, products and solutions that enhance people’s lives. We make communication faster, easier and more efficient for today’s always-on world.

Commscope

View as List Grid

Items 41-299 of 259

per page
Set Descending Direction
  1. CommScope - NODE A AWS 0.5W Amplifier Module
    $2,685.50
    The Andrew 7577548-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the AWS band (1710-1755 MHz / 2110-2155 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
  2. CommScope - NODE A PCS 0.5W Amplifier Module
    $2,755.81
    The Andrew 7577552-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 1900 MHz PCS band (1850-1910 MHz / 1930-1995 MHz). The digital channel module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
  3. CommScope - NODE A Cellular 0.5W Amplifier Module
    $2,755.97
    The Andrew 7577540-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 850 MHz cellular band (824 - 849 MHz / 869 - 894 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
  4. CommScope - 150-160 MHz 6/9dB Exposed Dipole Omni Antenna
    $833.56
    Andrew DB224-A 150 - 160 MHz omni, exposed dipole antenna. This adjustable field omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-0S pipe mount kit for 1.25 - 3.5 inch OD round members. Maximum power input is 500 watts. This four-bay exposed dipole VHF antenna can be arranged in an offset pattern producing a higher gain of 9 dB. Omni coverage and a gain of 6 dB can be achieved through a circular pattern. Andrew Solutions DB224 omni antenna meets RoHS 2002/95/EC. Learn More
  5. CommScope - 896-960 MHz 10dB 7 Element Yagi Antenna
    $408.84
    Andrew DB499-K is a heavy duty yagi antenna operating in the 890 - 960 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More
  6. CommScope - 150-158 MHz 3/6bB Exposed Dipole Omni Antenna
    $400.12
    Andrew DB222-A exposed dipole quasi-omnidirectional antenna operates in the frequency range 150 - 158 Mhz. This VHF field adjustable dipole antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has a gain of 3 dBd and the offset is 6.0 dBd gain. This antenna meets RoHS 2000/295SEC.This Andrew Solutions DB222 omni antenna is weather-resistant and can be mounted on the top or side of a tower. Learn More
  7. CommScope - 7/8" AVA-5 Automated Prep Tool
    $791.70
    Andrew Solutions EZfit automated coax cable coring and stripping preparation tool is made for use with AVA5 HELIAX 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently. This drill-driven coring tool also includes a T-handle for manual hand operation.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. For fast, clean, and consistent cable preparations go with Andrew Solutions EZfit drill-driven automated cable preparation tools. Learn More
  8. CommScope - 15' LDF4-50 Low PIM Jumper NM - NM
    $54.08
    The Andrew L4A-NMNM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More
  9. CommScope - 1/2" LDF4-50 Easiax Prep Tool
    $26.73
    Andrew Solutions EASIAX manual cable preparation tool is made for use with 1/2 inch HELIAX coaxial cable, including: LDF4-50, HL4RP-50 and RXL4 series inch foam dielectric cables. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More
  10. CommScope - ANDREW Replacement Blade Kit
    $84.46
    Andrew Solutions replacement blade kit is made for use with: CPT-L4ARC1, CPT-L45ARC, CPT-E2L2N, and CPT-E2L2DIN automated cable prep tools. Each blade kit contains four blades. The blade life lasts up to 150 cable preparations.Be prepared. Damaged or dull blades cause inconsistent cuts and can slow, or even stop, an installation. A cable preparation tool performs best with a sharp blade. Andrew Solutions replacement blade kit ensures consistent, clean, and quick cable preparation. Learn More
  11. CommScope - EASIAX Plus Automated Cable Preparation Tool
    $324.66
    Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More
  12. CommScope - Automated tool FSJ4-50B
    $166.70
    Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with FSJ4-50B HELIAX 1/2 inch version-two connectors. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More
  13. CommScope - 7/8" Easiax Prep Tool AVA5-50, LDF5-50A
    $39.24
    Andrew Solutions EASIAX manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including: AVA5, LDF5, and VXL5. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More
  14. CommScope - 3/8" & 1/2" Superflex Prep Tool
    $28.85
    Andrew EASIAX manual cable preparation tool is made for use with 3/8 inch and 1/2 inch superflex HELIAX coaxial cables, including: FSJ2, FSJ4, ETS2, RXL2 and RXL4. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew EASIAX cable preparation tools. Learn More