DAS, BDAs, Cell Phone Signal Boosters & Amplifiers

The Andrew 7577548-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the AWS band (1710-1755 MHz / 2110-2155 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More

The Andrew 7577552-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 1900 MHz PCS band (1850-1910 MHz / 1930-1995 MHz). The digital channel module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More

The Andrew 7577540-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 850 MHz cellular band (824 - 849 MHz / 869 - 894 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More

This series of Tappers unevenly split high power cellular signals in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands in the range 350 - 5,850 MHz, (there is no coupling 1550 to 1650 MHz). The innovative asymmetric design ensures an excellent input VSWR and coupling flatness across the specified bands, even down to a 2:1 split. The lightweight design allows easy attachment to a wall using the supplied bracket. Designed with only a few solder joints and an air dielectric, loss is minimized and reliability enhanced. Outdoor rated with N-Type connectors. Available with 7/16 DIN connectors as DN-B12. See DN-x4FC series for similar Tappers with 4.1-9.5 DIN "Mini-DIN" connectors. Low PIM <-153 dBc (2 x +43 dBm tones). Learn More

TERRAWAVE SOLUTIONS 700-2700 MHz 4-Way Splitter with N-Style Jack. 50 Watts. Learn More

Microlab DN-x4FN series of Tappers unevenly split high power cellular signals in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands in the range 350 - 5,850 MHz, (there is no coupling 1550 to 1650 MHz). The innovative asymmetric design ensures an excellent input VSWR and coupling flatness across the specified bands, even down to a 2:1 split. The lightweight design allows easy attachment to a wall using the supplied bracket. Designed with only a few solder joints and an air dielectric, loss is minimized and reliability enhanced. Outdoor rated. See DN-x4FD and DN-x4FC series for similar Tappers with 7-16 and 4.1-9.5 DIN "Mini-DIN" connectors. Low PIM <-153 dBc (2 x +43 dBm tones). Learn More

TELEWAVE 132-174 MHz two-way power splitter. -3.2dB system loss through the splitter. Not designed for transmitter power levels. N connectors. Learn More

Microlab DN-x4FN series of Tappers unevenly split high power cellular signals in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands in the range 350 - 5,850 MHz, (there is no coupling 1550 to 1650 MHz). The innovative asymmetric design ensures an excellent input VSWR and coupling flatness across the specified bands, even down to a 2:1 split. The lightweight design allows easy attachment to a wall using the supplied bracket. Designed with only a few solder joints and an air dielectric, loss is minimized and reliability enhanced. Outdoor rated. See DN-x4FD and DN-x4FC series for similar Tappers with 7-16 and 4.1-9.5 DIN "Mini-DIN" connectors. Low PIM <-153 dBc (2 x +43 dBm tones). Learn More

Learn More

Used to cover an unused combiner module port in the NODE A chassis. Learn More

NODE A RF combiner module for use with 700 and 800 MHz Public Safety amplifier modules. Slides into either the A2 or A4 subrack. 758-824/851-869 MHz. Will not work for 800 MHz only applications Learn More

380-2700 Mhz 2-Way power splitter. 3.0dB split loss through the splitter, 300 watts, mountable, N female connectors. Learn More

JMA TAPOI-SMR700L-F-4 Teko active POI modules are flexible single-band/single-operator RF interfaces connected to the signal source (BS, Off-Air Repeater) via coaxial cable. They are equipped with remote-controlled attenuators for Downlink and Uplink RF levels adjustment via the Coverage System Supervision Module and Management Tools. The active POI provides automatic power limiting with alerts automatically monitoring operator input power and attenuating (with alarms) to maintain RF coverage and balance across multiple POI inputs. Learn More

Microlab DN-44FE 350-5,850 MHz Multi-band, lightweight, equal splitter. 3:1/4.8 dB dB inequality between outputs.Microlab DN-x4FE series of Tappers unevenly split high power cellular signals in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands in the range 350 - 5,850 MHz, (there is no coupling 1550 to 1650 MHz). The innovative asymmetric design ensures an excellent input VSWR and coupling flatness across the specified bands, even down to a 2:1 split.The lightweight design allows easy attachment to a wall using the supplied bracket. Designed with only a few solder joints and an air dielectric, loss is minimized and reliability enhanced. Learn More

Microlab DN-x4FE series of Tappers unevenly split high power cellular signals in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands in the range 350 - 5,850 MHz, (there is no coupling 1550 to 1650 MHz). The innovative asymmetric design ensures an excellent input VSWR and coupling flatness across the specified bands, even down to a 2:1 split. Learn More

The ALDCBS1X4 GPS Amplified Splitter from GPS Networking is a one input, four output device with a 17dB minimum gain block. This Amplified 1X4 Splitter, DC blocked is available with BNC, N-type, SMA, or TNC connectors. Learn More

ANDREW 700 MHz LTE SISO amplifier module for NODE A repeater. 30dBm UL/27dBm DL composite power. 84dB gain. Slides into subrack. Learn More

TELEWAVE 406-512 MHz two-way power divider. 500 watts.1.5 or less VSWR.50 Ohms impedance.N-female connectors.Alum- inum housing.Txylan coated for weather. Learn More