Network Systems
-
CommScope - NODE A AWS 0.5W Amplifier Module$2,685.50The Andrew 7577548-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the AWS band (1710-1755 MHz / 2110-2155 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
CommScope - NODE A PCS 0.5W Amplifier Module$2,755.81The Andrew 7577552-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 1900 MHz PCS band (1850-1910 MHz / 1930-1995 MHz). The digital channel module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
CommScope - NODE A Cellular 0.5W Amplifier Module$2,755.97The Andrew 7577540-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 850 MHz cellular band (824 - 849 MHz / 869 - 894 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More
-
Microlab/FXR - 350-2700 MHz 15dB Low PIM Tapper$108.29This series of Tappers unevenly split high power cellular signals in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands in the range 350 - 5,850 MHz, (there is no coupling 1550 to 1650 MHz). The innovative asymmetric design ensures an excellent input VSWR and coupling flatness across the specified bands, even down to a 2:1 split. The lightweight design allows easy attachment to a wall using the supplied bracket. Designed with only a few solder joints and an air dielectric, loss is minimized and reliability enhanced. Outdoor rated with N-Type connectors. Available with 7/16 DIN connectors as DN-B12. See DN-x4FC series for similar Tappers with 4.1-9.5 DIN "Mini-DIN" connectors. Low PIM <-153 dBc (2 x +43 dBm tones). Learn More
-
Ventev / TerraWave - 700-2700 MHz 4-Way Splitter w/ N Females$60.74TERRAWAVE SOLUTIONS 700-2700 MHz 4-Way Splitter with N-Style Jack. 50 Watts. Learn More
-
Microlab/FXR - Multband Unequal Power$104.90Microlab DN-x4FN series of Tappers unevenly split high power cellular signals in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands in the range 350 - 5,850 MHz, (there is no coupling 1550 to 1650 MHz). The innovative asymmetric design ensures an excellent input VSWR and coupling flatness across the specified bands, even down to a 2:1 split. The lightweight design allows easy attachment to a wall using the supplied bracket. Designed with only a few solder joints and an air dielectric, loss is minimized and reliability enhanced. Outdoor rated. See DN-x4FD and DN-x4FC series for similar Tappers with 7-16 and 4.1-9.5 DIN "Mini-DIN" connectors. Low PIM <-153 dBc (2 x +43 dBm tones). Learn More
-
Telewave, Inc. - 132-174 MHz 2-Way Splitter w/ N Females$221.70TELEWAVE 132-174 MHz two-way power splitter. -3.2dB system loss through the splitter. Not designed for transmitter power levels. N connectors. Learn More
-
Ceragon Networks - 18GHz RFS Circular Transitions 2-6' Ant$195.00RFS Circular Transitions 18GHz, to provide circular waveguide output from RFS 2-6ft microwave antennas to a Ceragon 2+0 radio unit. Learn More
-
Microlab/FXR - Multband Unequal Power$105.06Microlab DN-x4FN series of Tappers unevenly split high power cellular signals in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands in the range 350 - 5,850 MHz, (there is no coupling 1550 to 1650 MHz). The innovative asymmetric design ensures an excellent input VSWR and coupling flatness across the specified bands, even down to a 2:1 split. The lightweight design allows easy attachment to a wall using the supplied bracket. Designed with only a few solder joints and an air dielectric, loss is minimized and reliability enhanced. Outdoor rated. See DN-x4FD and DN-x4FC series for similar Tappers with 7-16 and 4.1-9.5 DIN "Mini-DIN" connectors. Low PIM <-153 dBc (2 x +43 dBm tones). Learn More
-
Ceragon Networks - 23GHz RFS Circular Transitions 2-6' Ant$195.00RFS Circular Transitions 23GHz, to provide circular waveguide output from RFS 2-6ft microwave antennas to a Ceragon 2+0 radio unit. Learn More
-
-
RADWIN - Outdoor Lightning Protection Unit$115.07Outdoor Lightning Protection Unit for 10/100/1000Base-T PoE surge protector (including 0.5m CAT5e cable and wall/pole mounting kit) Learn More
-
CommScope - NODE A Combiner Slot Cover$61.80Used to cover an unused combiner module port in the NODE A chassis. Learn More
-
CommScope - NODE A 700/800 PS Combiner Module$1,317.08NODE A RF combiner module for use with 700 and 800 MHz Public Safety amplifier modules. Slides into either the A2 or A4 subrack. 758-824/851-869 MHz. Will not work for 800 MHz only applications Learn More
-
Microlab/FXR - 380-2700 MHz 2-Way Splitter w/ N Females$104.75380-2700 Mhz 2-Way power splitter. 3.0dB split loss through the splitter, 300 watts, mountable, N female connectors. Learn More
-
RADWIN - 5.8GHz 2000 D-Plus Connectorized ODU$1,308.79The RADWIN D-Plus Series radio provides 750 Mbps Ethernet net throughput on the 5.1 to 6 GHz frequency with a range up to 40 km/25 miles. The RW-2050-D200 radio is connectorized for two N-type external antennas. Compact and robust, RADWIN 2000 products provide Ethernet and native TDM (up to 16 E1s/T1s) on the same link, facilitating seamless migration from TDM to all-IP networks. All RADWIN 2000 products incorporate OFDM and MIMO 2x2 with antenna diversity and a unique air interface. This guarantees robust performance in the unlicensed spectrum and in environments where there is high interference. Learn More
-
Cambium Networks - PTP 600 - PTP 100M Clad Cable used for PTP500/600 radios$677.49MOTOROLA PTP Clad Cable 100m reel (328ft Copper Clad Armored Cable for PTP 300/500/600 series radios. Learn More
-
Cambium Networks - PTP 600 SYNC - PTP-SYNC Synchronization Unit for PTP 600$416.56MOTOROLA PTP-SYNC for TDD 500/600. Maintains local synch between collocated radios when timing is unavailable. One PTP-SYNC needed per link. Learn More
-
Moxa Americas, Inc. - EDS-200A - Rugged 5x10/100BaseT(X) Port Unmanaged Switch$109.06The Moxa EDS-205A Ethernet switch is an unmanaged 5 port switch with an aluminum IP30 enclosure. Switch contains (5) 10/100BaseT ports with an operating temperature range of -10 to 60C. Input voltage is 9.6 to 60 VDC, or 18 to 30 VAC.The EDS-200A family of unmanaged Ethernet switches are available with RJ45 or with a multi-mode ST fiber connector. These DIN-rail switches are enclosed in IP30 rated aluminum housings, and have LED for plug-and-play installation.Industrially hardened switches are perfect for quick network augmentation or expansion, and for connecting remote devices to an IP based LAN. With DIN-rail mounts, these products are suitable for enclosures, industrial or manufacturing applications. Learn More
-
Cambium Networks - PTP 800 - PTP800 Coax Ground Kit$28.65MOTOROLA PTP800 Coaxial Grounding Cable Kit for 1/4" and 3/8" Cable. Learn More
-
JMA Wireless - Teko Active POI for 700 Low band Flexi, 4.3-10$1,534.27JMA TAPOI-SMR700L-F-4 Teko active POI modules are flexible single-band/single-operator RF interfaces connected to the signal source (BS, Off-Air Repeater) via coaxial cable. They are equipped with remote-controlled attenuators for Downlink and Uplink RF levels adjustment via the Coverage System Supervision Module and Management Tools. The active POI provides automatic power limiting with alerts automatically monitoring operator input power and attenuating (with alarms) to maintain RF coverage and balance across multiple POI inputs. Learn More
-
-
Microlab/FXR - 350-5850 MHz 4.8 dB Low PIM Tapper 4.3-10 Female$115.66Microlab DN-44FE 350-5,850 MHz Multi-band, lightweight, equal splitter. 3:1/4.8 dB dB inequality between outputs.Microlab DN-x4FE series of Tappers unevenly split high power cellular signals in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands in the range 350 - 5,850 MHz, (there is no coupling 1550 to 1650 MHz). The innovative asymmetric design ensures an excellent input VSWR and coupling flatness across the specified bands, even down to a 2:1 split.The lightweight design allows easy attachment to a wall using the supplied bracket. Designed with only a few solder joints and an air dielectric, loss is minimized and reliability enhanced. Learn More
-
Microlab/FXR - 350-5850 MHz 6dB Low PIM Tapper$115.49Microlab DN-x4FE series of Tappers unevenly split high power cellular signals in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands in the range 350 - 5,850 MHz, (there is no coupling 1550 to 1650 MHz). The innovative asymmetric design ensures an excellent input VSWR and coupling flatness across the specified bands, even down to a 2:1 split. Learn More
-
GPS Networking, Inc. - GPS Active Antenna Splitter 1x4$519.82The ALDCBS1X4 GPS Amplified Splitter from GPS Networking is a one input, four output device with a 17dB minimum gain block. This Amplified 1X4 Splitter, DC blocked is available with BNC, N-type, SMA, or TNC connectors. Learn More
-
CommScope - NODE A 700 LTE 0.5W Amplifier Module$2,756.46ANDREW 700 MHz LTE SISO amplifier module for NODE A repeater. 30dBm UL/27dBm DL composite power. 84dB gain. Slides into subrack. Learn More
-
Telewave, Inc. - 406-512 MHzx 2-Way Pwr Divider w/ N Females$285.42TELEWAVE 406-512 MHz two-way power divider. 500 watts.1.5 or less VSWR.50 Ohms impedance.N-female connectors.Alum- inum housing.Txylan coated for weather. Learn More