Enclosures & Cable Management
-
Cooper B-Line - Adapter plate for rack, Gray$136.76B-Line by Eaton Adapter plate set for mounting 19"equipment on 23"racks. Accomodates 3 mounting spaces & includes#12-24 mounting hardware. Learn More
-
Bud Industries Inc. - Open Rack Equipment Shelf, Non-Ventilated, 15"D$88.67The Bud Industries SA-1750-MG open rack shelf is designed to fit 19" wide panel spaces and 5.25" panel height. The Shelf is constructed of a single piece of 16 gauge steel and flanged for added support. The SA-1750-MG is non-ventilated and includes all mounting hardware. Overall shelf measures 17.62"W x 15"D. Supports 150 Lbs. Finish: Black Texture (BT) Learn More
-
Ventev / TerraWave - Polycarbonate CAT60 Enclosure Replacement Key Set$14.20TERRAWAVE Replacement Key Set for CAT60 Polycarbonate Terrawave Enclosures. 2 Keys Per Set. Learn More
-
DDB Unlimited - 30"Hx23"Wx25"D Cabinet$875.80The DDB Unlimited ST-30DX stackable indoor data cabinet (cream finish) is constructed from state-of-the-art Alumiflex material that is as rigid as steel yet noticeably lighter. This aluminum cabinet (30 x 23 x 25 inches) provides added depth to help in situations that require such. The data cabinet has left or right mountable front and rear doors for access to both sides of equipment. The doors are recessed with a non-intrusion locking system. Two adjustable siding rails with 19 inch EIA standard spacing are included so that you can customize the enclosure to fit your needs. The stackable electronic equipment cabinet features rounded corners for safety. The powder cream finished data cabinet is textured and scratch-resistant. The Alumiflex material allows you to operate communication electronics without affecting or being effected by RF influences. Two screened areas are built-in for ventilation. Air conditioner, heater, and fan kit are optional add-ons.The DDB Unlimited data cabinet equipment enclosure is Class 250, Type 2 NEMA rated. Learn More
-
Harger - .25"x1"x19.25" Horizontal Ground Bar$56.81HARGER .25" x 1" x 19.25" horizontal equipment rack ground bar. Includes hardware kit. 1" Insulators. Learn More
-
Ventev / TerraWave - Universal Pole Mount Kit - Fits 12" Diameter$126.49TERRAWAVE Universal Pole Mount Kit Fits up to a 12 in. Diameter Pole. Mounts TW 18x16 Poly enclosures. Learn More
-
Ventev / TerraWave - 1/2" NEMA 4 Hole Seal (Plug)$6.721/2" NEMA 4 Hole Seal (Plug) used with TerraWave enclosures provide a tight seal on unused knockout openings against dust, dirt, oil and water. An oil resistant gasket is included. Steel hole seals have a polyester powder paint finish over a galvanized front surface. Learn More
-
Ventev / TerraWave - TW Enclosure Ground Bar - 9 Port$12.46TERRAWAVE 9 Port Enclosure Ground Bus Bar. Includes 2 self-tapping screws. Learn More
-
Ventev / TerraWave - Enclosure Power Recept$20.65TERRAWAVE UL Rated Power Receptacle Max. Voltage: 125V/ Max. Current: 15A Max Power: 1650W/Type: 3 Polar, 2 Socket Includes 2 Self-Tapping Screws. Learn More
-
Harger - 1/4" x 5/8" x 36" Vertical Mount Ground Bar$80.48HARGER Vertical mount ground bar. 1/4" x5/8" x 36" bar with threaded hole pairs on 4" centers. Learn More
-
Bud Industries Inc. - Adjustable Open Rack Shelf, 19" Panel Width, Black$106.01The Bud Industries SA-1278-BT open rack adjustable shelf is designed to fit 19" wide panel spaces. The shelf is constructed of 16 gauge steel and is flanged for added support. Shelf is adjustable for depth within rack, and come with all mounting brackets and hardware. Overall measurements of the shelf are 17.62"W x 16"D. Supports 150 lbs. Finish: Black Texture (BT). Learn More
-
CommScope - SSM - Threaded Rod Support Kit (3/8" x 12" rod)$67.60COMMSCOPE Threaded Rod Support kit of 5. Includes 3/8" x 12" rod, nuts, washers, ceiling bracket. Learn More
-
DDB Unlimited - Wall or Pole Mount for DDB Cabinets$673.96DDB UNLIMITED Wall or Pole Mount for DDBCabinets. "L" shaped. 30" wide base (toset cabinet on) X 14" back sided for attaching to wall or pole. With perferat Learn More
-
Bud Industries Inc. - Rackmount Power Outlet Strip - 15A Rear-Facing$95.85The POS-194-S rack-mounted 15A power outlet strip from Bud Industries is designed for 19" panel space open and closed racks. This unit is easily installed to the panel mounting surface of the rack and features a 12ft long 14/3 SJT power cord. The POS-194-S surge-protected 8-outlet power strip provides instant access to power distribution from the rear of the unit and meets both UL 1363 and 1449 specifications. The POS-194-S also features a built-in circuit breaker to protect your valuable equipment from surges of up to 330V. Learn More
-
Bud Industries Inc. - 42" x 19" Open Aluminum Relay Rack, Natural Finish$371.23The Bud Industries ARR-1276-NF 24U capacity open aluminum relay rack is ideal for installation where easy access to components is top priority. Each ARR-1276-NF aluminum floor rack is built for years of solid, trouble-free service as well as obvious ease of service where frequent attention is desired (i.e. telephone switching systems).The Bud Industries ARR-1276-NF open aluminum floor rack has a natural aluminum finish and features 19" wide panel spaces. Panel mounting holes are #12-24 tapped on EIA universal spacing on both the front and rear flanges. Screws are ordered separately. Rack is shipped knocked-down in a single carton with all necessary assembly hardware. Learn More
-
NewMar - Ground Bar for 19" Racks$110.28NEWMAR copper ground bar for use with 19" racks. Bolts to the back ofthe rack. 9/32" holes spaced 1.5" apart.Includes mounting hardware. Learn More
-
CommScope - Anchor Rail Assembly$45.61COMMSCOPE Anchor rail assembly. Used for attaching Snap-Ins to strut. Learn More
-
X-Mark/CDT - 19" Cantilever Flush Mount Shelf, 18" Depth, Black$152.12X-MARK Flush Mount Cantilever Shelf for 19" rack, 18" depth. 4 point mounting. Shelf is vented and color is black. Deepwall mount 55 lbs. Learn More
-
Cooper B-Line - 1 ea. 15/16 Hex Nuts$0.8715/16" hex nuts. Steel with zinc plating. 5/8"-11 thread size. Learn More
-
Ventev / TerraWave - Polycarbonate Mounting Feet$3.69TERRAWAVE mounting feet for polycarbonate enclosures. 4 Mounts per pack. Learn More
-
Ventev / TerraWave - DIN Rails for 10" Wide TW Poly Enclosures$18.50DIN Rails for use in TW 10" wide Polycarbonate Enclosures. Includes 2 DIN Rails and Mounting Hardware Learn More
-
Ventev / TerraWave - Universal Pole Mount Kit - Fits 12" Diameter$81.93TERRAWAVE Universal Pole Mount Kit Fits up to a 12" diameter pole. Mounts TW 12x10 & 14x12 Poly & Fiberglass Encl., Flex-Line Steel Encl, &PC & St Heated/Cooled Encl. Learn More
-
Bud Industries Inc. - 77" x 19" Open Aluminum Floor Rack, Natural Finish$405.70The Bud Industries ARR-1272-NF 44U capacity open aluminum relay rack is ideal for installation where easy access to components is top priority. Each ARR-1272-NF aluminum floor rack is built for years of solid, trouble-free service as well as obvious ease of service where frequent attention is desired (i.e. telephone switching systems).The Bud Industries ARR-1272-NF open aluminum floor rack has a natural aluminum finish and features 19" wide panel spaces. Panel mounting holes are #12-24 tapped on EIA universal spacing on both the front and rear flanges. Screws are ordered separately. Rack is shipped knocked-down in a single carton with all necessary assembly hardware. Learn More
-
Tripp Lite - Rackmount 19" AC Powerstrip, 12 Outlets, 15A$101.51Tripp Lite's RS-1215 Power Strip offers 15 amp capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rackmount, wallmount and under-counter installation. Uses only 1 rack space (1U) when installed in any 19 inch rack meeting EIA standards. Unfiltered electrical pass-through makes RS-1215 ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 12 NEMA5-15R outlets (6 front/6 rear), 15 ft AC power cord and lighted switch with cover prevents risk of accidental turn-off. Designed for standard 19-inch racks (1U high) 12 outlets (6 front / 6 rear) 15-amp circuit breaker 15 ft. cord Learn More
-
Cooper B-Line - Two-post equipment rack for 19" panel mounting$392.86COOPER B-LINE Two-post network equipment rack with 3" uprights for 19" panel mounting. Constructed of aluminum and finished with a flat black power coating. Learn More